Supplier: Showa

Designed for use in 'knife hand' applications in food processing.

Supplier: SEMPERIT TECHN PROD

These hand-specific disposable gloves with beaded cuffs feature a special inner coating. Ideal for use in laboratories, electronic and pharmaceutical industries.

Supplier: Showa

These versatile, single-use gloves provide sensitivity and dexterity. The 0,10 mm thick nitrile is also waterproof and provides extreme comfort during long periods of use.

Supplier: HONEYWELL SAFETY

Ambidextrous knitted gloves made of Kevlar®, with cotton lining and long knitted, elasticated wrist (10 cm). The Kevlar® fibre offers good resistance to cuts and provides protection against thermal hazards (contact heat).

Supplier: Showa

Showa GP-KV1 gloves are made of aramid fibre, flexible and easy-maintenance providing effective protection against cuts and with excellent dry and wet grip.

Supplier: Showa

These thin, light gloves with butyl coating protect the hand from a wide array of chemical hazards. Available with a smooth finish or with a rough finish on the fingertips.

Supplier: HONEYWELL SAFETY

These dipped latex gloves with cotton flock interior provide good mechanical and chemical resistance against detergents and liquid products.

Supplier: Showa

These disposable gloves are powder-free and made of 100% nitrile. By using Showa’s Eco Best Technology®, the 6110PF’s are completely eco-friendly, breaking down by 82% in just 386 days when tested in a laboratory.

Supplier: Showa

These lined nitrile gloves with rolled cuffs protect the hand from oils, hydrocarbons, grease and abrasion.

Supplier: Showa

The new ultra-light XC500 combines high cut-resistance level E/A5 provided by a seamless HPPE/Stainless steel/Polyester liner with a durable, abrasive-resistant polyurethane palm coating usable in various industrial applications.

Supplier: HONEYWELL SAFETY

These disposable gloves are ideal for food handling, medical laboratories, fine assembly of oily parts and chemicals and electronics.

Supplier: Showa

The new ultra-light XC800 combines high cut-resistance level E/A5 provided by a seamless HPPE/stainless steel/pester liner with a durable, oil-resistant microporous nitrile palm coating usable in various industrial applications.

Supplier: Showa

These hand-specific cotton gloves with latex coating on palm and fingertips are flexible and robust offering great dexterity, outstanding grip and good resistance to tearing. They are ideal for heavy duty manual handling.

Supplier: FELDTMANN HELMUT

Seamless fine knit gloves with nitrile foam inner wall coating with nitrile nubs for better grip. The carrier fabric consists of 90% nylon (polyamide) and 10% Lycra® (spandex).

Supplier: HONEYWELL SAFETY

These polyester/cotton knitted gloves with PVC dot coating on both sides are ideal for the handling of dry and slippery parts.

Supplier: Showa

These fully nitrile coated gloves are either available with cotton flock lining or without lining. They protect hands from oils, hydrocarbons, grease and abrasion, while providing an effective long lasting grip.

Supplier: Showa

These nitrile foam Hi-Vis anti-impact gloves have a highly protective design to prevent injuries caused by impact and other hazards. The SHOWA-configured Thermo Plastic Rubber (TPR) shields to the back of the fingers and hand are designed to bolster protection against crushes and impacts.

Supplier: Portwest

Nitrile gauntlet with sandy palm dip for a secure grip and abrasion resistance. This glove is designed for use in wet and oil environments. Using a lightweight soft comfortable liner, it increases the wearability for prolonged periods of time.

Supplier: HONEYWELL SAFETY

This durable glove made from neoprene provides protection against a wide range of chemical products (detergents, some solvents, acids and bases).

Supplier: HONEYWELL SAFETY

These 100% polyamide knitted liners feature a latex coating which offers good mechanical and chemical resistance against detergents and liquid products. It also resists acids and bases. The glove's crepe finish helps to improve the grip on slippery parts (tailored for the fishing trades).

Supplier: Showa

These seamless knitted nylon liners with thin nitrile coating protect the hand from oils, hydrocarbons, grease and abrasion.

Supplier: HONEYWELL SAFETY

All in one glove with enhanced cut resistance, comfort, ease of selection, cost effectiveness. Due to its high-performance fiber, the Honeywell CoreShield™ range of 22 styles offers complete cut protection from level A/A1 to F/A9, in a choice of four various gauges (from 10 gg to 18 gg) and three different coatings.

Supplier: HONEYWELL SAFETY

These nitrile dipped gloves with cotton flock lined interior are particularly suitable for handling oils, fats and hydrocarbon derivatives.

Supplier: HONEYWELL SAFETY

These unsupported butyl gloves offer resistance to many solvents, acids and medium concentrated bases as well as to ozone and heat. They are also gas tight.

Supplier: Showa

These non woven liners with full neoprene coating protect the hand against hot temperatures and abrasion while providing a good grip.

Supplier: Showa

These gloves with rolled cuffs and smooth finish are made of unsupported Viton and a butyl coating. They protect the hands from a wide array of chemical hazards.

Supplier: Showa

The unsupported neoprene over natural rubber gloves are resistant to acids, alcohols, oils, caustics, animal fats and petroleum based solvents.

Supplier: Portwest

Chemical resistant gauntlet with textured pattern for enhanced grip.

Supplier: Showa

Designed to keep hands warm and dry in the most extreme environments, the 477 cold resistant glove combines thermal insulation with tactical grip. Foam grip and a dual nitrile coating ensure precision in wet and oily environments, whilst the acrylic liner provides protection from cold weather.

Supplier: Showa

This soft, cotton flannel liner with natural rubber coating and wrinkle finish provides superior cut, abrasion, snag, and puncture resistance.