You searched for: Environmental Test Kits

Supplier: MACHEREY-NAGEL

The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of copper concentrations as low as 0.1 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad increasing the sensitivity significantly. Ideal for rapid and easy analysis of copper directly on-site. No maintenance or calibration is required.

Supplier: MACHEREY-NAGEL

The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.

Supplier: Lovibond

Comparator 2000+ is a versatile modular system for testing water.This kit measures chlorine, alkalinity, pH calcium hardness and cyanuric acid.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage color scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Hach

Cuvette test for the determination or free chlorine, 0,05 to 2,0 mg/L Cl₂ and chlorine dioxide, 0,09 to 3,8 mg/L ClO₂. Pre-dosed reagents for maximum safety.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

The DiaQuant® product line is specifically designed for the dialysis environment to test rinse and feed water, as well as sufficient potency levels of disinfectant when storing dialysis equipment. All tests are simple and fast without any mixing or mess. Our proven technology makes testing reliable and accurate, thus providing a safe environment for your patients.

Supplier: Lovibond

These kits are mainly designed for water testing (boiling, cooling and domestic water).

Supplier: Industrial Physics

TQC Bresle kit is a chloride test kit that complies with the ISO 8502-6 and ISO 8502-9 standards. The Bresle method is designed to to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity meter. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a Bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Included is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

Supplier: Hach

The standard anionic surfactant method has several drawbacks:
*Multiple handling steps are time consuming and complicated.
*Large volumes of extraction solvents create a safety and environmental risk.
*The combination of lengthy handling time, glassware maintenance, and solvent disposal adds up to significant costs per test. A standardised cuvette-based extraction and photometric measurement system overcomes all these disadvantages to provide accurate, reproducible results.

Supplier: Honeywell Chemicals

Test kit, Indicator buffer tablets for the determination of water hardness

Supplier: Lovibond

Test kit, Urea reagent 1, Range: 0,1 – 2,5 mg/l, For unit: MD100, MD200, MD600, Spectrodirect, Multidirect

Supplier: Lovibond

Comparator 2000+ is a versatile modular system for testing water.

Supplier: Lovibond

Test kit, Silica reagent, ammonium molybate liquid solution, Range: 2.5 – 25 mg/l SiO₂

Supplier: Lovibond

Test kit, Hardness-Calcium, Calcheck tablet, Range: 50 – 900 mg/l CaCO₃, For unit: MD600

Supplier: Hach

The chlorine dioxide test kit uses the reliable and EPA-accepted DPD method to monitor ClO2 concentration, while eliminating chlorine interference through the addition of glycine.

Supplier: Lovibond

Indicator for pH range 4,0 to 11.

Supplier: Lovibond

Indicator for pH range 7,2 to 8,8 and 1 to 2,6.

Supplier: WTW

Crack set 20 for Nitrate (14563, 14542 und 14773) for 90 determinations of total nitrogen in sample materials containing at most 15 mg/L N.

Supplier: Lovibond

Test kit, Fluoride tablet A - Z, Range: 0 – 1,6 mg/l

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.

Supplier: WTW

Test kit, Crack set 10 for thermal digestion of heavy metals, sufficient for 100 digestions

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.

Supplier: Hach

For determination of dissolved oxygen by the Winkler method (azide modification) and buret titration.

Supplier: Lovibond

The Silt Density Index (SDI) is a measure of the solids or particulate content of water and is of specific importance when commissioning reverse osmosis plant.