20843 Results for: "Standardy+-+uran&pageNo=15"

Supplier: VARIAN

Bond Elut™ NH₂ is a weaker anion exchanger than sorbents such as SAX (a quaternary amine sorbent that is always charged) and is therefore a better choice for retention of very strong anions, such as sulfonic acids, which may retain irreversibly on a SAX sorbent. Similar to Diol and SI sorbents, Bond Elut™ NH₂ is excellent for the separation of structural isomers.

Supplier: VARIAN

Native silica is generally regarded as the most polar SPE sorbent available. Bond Elut™ SI is particularly effective at separating compounds with a very similar structure. Applying the analytes in a non-polar solvent, then increasing the solvent polarity by increasing the concentration of a polar modifier, such as THF or ethyl acetate, delivers effective separations.

Supplier: Cytiva

His GraviTrap™ TALON® is a prepacked gravity flow column for convenient manual purification of histidine-tagged proteins directly from clarified or unclarified cell lysates.

Supplier: GA

Permanent autoclave-resistant labels withstand various sterilisation procedures, including in steam autoclaves, dry heat ovens, gamma irradiators, and ethylene oxide gas sterilisers.

Supplier: Thermo Fisher Scientific

Choose Thermo Scientific™ SureSTART™ 1,7 ml high recovery glass screw top microvials to maximise the injection volume for <2 ml samples in high-throughput applications.

Supplier: VARIAN

Bond Elut™ SAX is a strong anion exchange sorbent ideally suited for the extraction of compounds such as carboxylic acids, which may not retain effectively on weak anion exchange sorbents. The sorbent is supplied in the chloride counter ion form. You can modify the selectivity of the phase by replacing the chloride ion with other anions, such as acetate and hydroxide.

Supplier: Cytiva

MAbTrap™ is an affinity chromatography kit for fast and effective purification of monoclonal and polyclonal IgG from ascites fluid, serum and cell culture supernatants. MAbTrap™ Kit contains everything necessary to perform a complete one step purification without using complicated equipment. It also eliminates time consuming buffer preparation and column packing.

Supplier: MAPA

These ambidextrous, liquidproof gloves with beaded cuffs are made of nitrile.

Supplier: BTX

The BTXpress™ is a single buffer solution, developed to quickly and efficiently deliver genes into mammalian cells that were previously considered hard to transfect by chemical and other non viral methods. Transfection using this high performance electroporation solution is equally effective in delivering DNA as well as siRNA into mammalian cells.

Supplier: HONEYWELL SAFETY

Polyamide with its polyurethane coating provide excellent abrasion and tear resistance. Non pilling, the polyamide is suitable for precision work. The ventilated back and ultra light coating optimise the glove's breathability.

Supplier: ProSci Inc.

The protein encoded by this gene is a member of the mitogen-activated protein kinase (MAPK) family. These family members function in a protein kinase signal transduction cascade, where an activated MAPK kinase kinase (MAP3K) phosphorylates and activates a specific MAPK kinase (MAP2K), which then activates a specific MAPK. This MAP3K protein plays an essential role in apoptotic cell death triggered by cellular stresses. [provided by RefSeq].

Supplier: Edmund Bühler GmbH

High capacity microplate shaker with high speed orbital motion. TiMix 5 is an analogue version, and TiMix 5 control has digital display and programmable control, it can also be integrated into analytical robotics systems.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

A versatile shaker for different applications: Cooling, incubating, rotating, shaking, rocking, stirring and 3D line motion. Ideal for the study of microorganisms and tissue cell growth under strictly controlled conditions of temperature and agitation.

Supplier: CARESTREAM HEALTH

X-OMAT® LS is an economical, blue-tinted film for when the maximum performance of BioMax® MR, BioMax® MS, or X-OMAT® AR film is not required. X-OMAT® LS film is suitable for use with all commonly used radioisotopes and chemiluminescent probes. However, the film provides significantly less detection sensitivity than the BioMax® autoradiography films, resulting in longer exposure times.

Supplier: MP Biomedicals

A 10 mg/mL Ready-To-Use solution of EtBr in specially filtered, deionized water.

Supplier: FRISTADS KANSAS

Basic polo shirt made of 65% polyester and 35% cotton. Available in many different colours.

Supplier: Thermo Fisher Scientific

TMT10plex™ Isobaric Mass Tag Labelling Kit and Reagent Sets enable multiplex relative quantitation by mass spectrometry (MS).

Supplier: MACHEREY-NAGEL

The retention gap technique in combination with on-column injection allows concentration of a large sample volume in the capillary column. The retention gap depends on the solvent used:

Supplier: SCOTSMAN

Self-contained flaked ice maker with built-in drain pump, produces 122 kg of ice every 24 h, 40 kg storage bin, 13 A power.

Supplier: Corning

Axygen® ImpermaMat sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. ImpermaMats are chemically resistant, reusable sealing mats, that provide a high degree of confidence.

Supplier: VWR Collection

VWR® cleanroom nitrile gloves are manufactured from a synthetic copolymer of acrylonitrile, butadiene and methylacrylic acid and provide reliable, durable and comfortable hand protection during demanding cleanroom applications. The ambidextrous gloves exhibit high tensile strength and strong permeation resistance against a wide variety of solvents, acids and bases.

Supplier: VWR Collection

These single-use examination and disposable protective gloves are made from nitrile and are developed with sustainability in mind. They are suitable for use in medical applications, food processing and for general lab requirements in non hazardous areas.

Supplier: Avantor Fluid Handling

Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient.

Supplier: 3M Food Safety

3M™ Clean-Trace™ Surface Protein (Allergen) Test Swab ALLTEC60 is a rapid, simple, and reliable solution to monitor the presence of allergens on surfaces to effectively manage cleaning.

Supplier: VELP SCIENTIFIC

Digital heating plate with ceramic top, providing high corrosion resistance, precise temperature control, and enhanced safety features.

Supplier: asecos

Under bench cabinets with drawers or wing doors. Fire resistance: 90 minutes.

Supplier: Thermo Fisher Scientific

Solaris incubated orbital shakers feature Peltier chillers, units have a compact footprint, are designed to fit on the benchtop, user programmability for easy setup and reproducibility plus connectivity for easy monitoring.

Supplier: Ansell

These knitted nylon/carbon fibre gloves meet most electrostatic discharge protection needs. They feature a PU coating on the fingertips or on the entire palm.

Supplier: NASCO FORT ATKINSON

Blended, virgin polyethylene film with Write-On strip provides exceptional clarity, superior strength, and sterilised after manufacturing for results you can trust. HACCP, EPA, USDA, FDA approved for food contact.

Supplier: Thermo Fisher Scientific

B-PER™ Complete Bacterial Protein Extraction Reagent is an all-in-one formulation of non ionic detergent and enzymes that enables mild extraction of proteins from both gram-negative and gram-positive bacteria without the need for mechanical disruption. B-PER Complete Reagent combines a universal nuclease and lysozyme to improve cell lysis and reduce viscosity, and may be used for soluble protein extraction and inclusion body purification from bacterial cell lysates.