2298 Results for: "Standardy+-+fosfor"

Supplier: VWR Chemicals

These standards are ideal to use as control standards for COD measurements to verify that correct analysis for COD has taken place.

Supplier: DOEHLER GROUP

Selective liquid media for qualitative detection of beverage spoiling microorganisms. SSL Broth and OFS Agar are suitable for your analysis of:
• non-alcoholic beverages pH <4,5, including fruit juices
• beer, wine & milk mix beverages
• fruit juice concentrates
• beverage compounds
• beverage powders and extracts
• sugar
• rinsing water samples
• membrane filtered samples
Ready-to-use SSL Broth can be used to cultivate acid-tolerant microorganisms such as lactic acid bacteria, acetic acid bacteria, yeasts and moulds from non-alcoholic beverages. It allows the enrichment of even large sample volumes. SSL Broth can also be used for pre-enrichment with detection on OFS Agar. SSL Broth and OFS Agar offer the following user benefits:

Supplier: VWR Chemicals

These products can be used as calibration standards for density measurements by pycnometric, vibrational or hydrometer-based techniques.

Supplier: witeg Labortechnik

Borosilicate glass 3.3.

Supplier: Hach

Set used for determination of reactive phosphorus (ortho-phosphate) by the molybdovanadate Test 'N Tube™ method.

Supplier: VWR Chemicals

These products can be used as calibration standards for density measurements by pycnometric, vibrational or hydrometer-based techniques.

Supplier: VWR Chemicals

These products can be used as calibration standards for density measurements by pycnometric, vibrational or hydrometer-based techniques.

Supplier: VWR Chemicals

These products can be used as calibration standards for density measurements by pycnometric, vibrational or hydrometer-based techniques.

Supplier: LGC Standards PROMOCHEM

The solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), flame or furnace atomic absorption spectroscopy (AA or GFAA), x-ray fluorescence spectroscopy (XRF), and other techniques for elemental analysis.

Supplier: CPACHEM

ICP QC standards used for Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Cs, Co, Cr, Cu, Fe, In, K, Li, Mg, Mn, Mo, Na, Ni, Nb, Pb, Rb, Sb, Se, Sr, Ti, Tl, V, U, Zn. 1 mg/l for 33 elememts.

Supplier: LGC Standards PROMOCHEM

The solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), flame or furnace atomic absorption spectroscopy (AA or GFAA), x-ray fluorescence spectroscopy (XRF), and other techniques for elemental analysis.

Supplier: LGC Standards PROMOCHEM

These solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma mass spectrometry (ICP-MS), or alternative techniques, such as inductively coupled plasma optical emission spectroscopy (ICP-OES), and flame or furnace atomic absorption spectroscopy (AA or GFAA).

Supplier: LGC Standards PROMOCHEM

This standard solution is intended for use as a certified reference material and calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS) or alternative techniques, such as and flame or furnace atomic absorption spectroscopy (AA or GFAA).

Supplier: LGC Standards PROMOCHEM

These solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), flame or furnace atomic absorption spectroscopy (AA or GFAA), x-ray fluorescence spectroscopy (XRF), and other techniques for elemental analysis.

Supplier: LGC Standards PROMOCHEM

The solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), flame or furnace atomic absorption spectroscopy (AA or GFAA), x-ray fluorescence spectroscopy (XRF), and other techniques for elemental analysis.

Supplier: VWR Collection

These tips are made of high quality, 100% pure, virgin medical grade PP. Made in the highest quality moulds, these tips can be used whenever the work demands a higher standard.

Supplier: Hach

Standard solution for accuracy checks in potassium determinations.

Supplier: Sartorius

These filter tips have more space between the sample and the filter than conventional filter tips. This virtually eliminates the risk of an expensive or a contagious sample permeating the filter.

Supplier: CROSSTEX

Biological sterilisation indicators are used to perform sterilisation cycle validation. They are created by inoculating spore suspensions of certified population and resistance onto paper strips.

Supplier: LGC Standards PROMOCHEM

The solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), flame or furnace atomic absorption spectroscopy (AA or GFAA), x-ray fluorescence spectroscopy (XRF), and other techniques for elemental analysis.

Supplier: YSI ENVIRONMENTAL

Conductivity standard, 50 000 µS/cm

Supplier: Hach

Standard solution for accuracy checks in sulfate determinations.

Supplier: Hach

For accuracy checks in chlorine determinations. Lot specific concentration displayed on label.

Supplier: LGC Standards PROMOCHEM

This standard solution is intended for use as a certified reference material and calibration standard for the analysis of sulphur in various petroleum products using x-ray fluorescence spectrometry (XRF), combustion and other techniques for sulphur analysis. It is suitable for use with methods such as ASTM D2622, D4294, D5453, D7039, D7212, D7220 and others.

Supplier: LGC Standards PROMOCHEM

The solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), flame or furnace atomic absorption spectroscopy (AA or GFAA), x-ray fluorescence spectroscopy (XRF), and other techniques for elemental analysis.

Supplier: UVEX

The uvex C500 series sets standards regarding protection, comfort, flexibility, tactility and economy. This high-tech safety glove combines all of these qualities with the highest level of cut protection, level 5/C.

Supplier: Hach

For accuracy checks in Biochemical Oxygen Demand (BOD) determinations.

Supplier: Industrial Physics

Calibration standards are meant for verifying coating gauges - These plastic foils and shims are acting as standards.

Supplier: LGC Standards PROMOCHEM

The solutions are intended for use as a certified reference material or calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), flame or furnace atomic absorption spectroscopy (AA or GFAA), x-ray fluorescence spectroscopy (XRF), and other techniques for elemental analysis.

Supplier: VWR Chemicals

These products can be used as calibration standards for density measurements by pycnometric, vibrational or hydrometer-based techniques.