"Single-use Temperature Sensor"

Supplier: Greisinger

The GMH3111 pressure logger is designed with impact-resistant ABS plastic housing, membrane keyboard, transparent panel and front side IP 65. The pressure sensors are already callibrated and fully interchangeable pressure probes.

Supplier: MEMMERT

These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.

Supplier: MEMMERT

This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is ideal.

Supplier: EBRO

These probes are used for surface temperature measurement on an extended period of ferrous containing compounds, e.g. heating plates, heating tubes, pumps, flushing tools, motors and turbines.

Supplier: WTW ONLINE

pH meter, Tetracon 700 IQ Digital, 4-pole conductivity cell for waste water, with integrated temperature sensor, without SACIQ cable

Supplier: HAMILTON BONADUZ

Polyplast electrodes have a shatterproof plastic shaft. They are ideal for portable measurements or as entry level sensors for basic laboratory applications.

Supplier: DISTEK

The BIOne autoclavable bioreactor is available in a range of sizes including; 2, 5 and 10 L working volume. All metal components are manufactured from 316L stainless steel with electropolish.

Supplier: Greisinger

The AX 131 are precision analog type K thermocouple temperature probes. The immersion and insertion probes are designed for use in gases, liquids and soft materials. Stem material is corrosion and temperature resistant stainless steel, which is suitable for continuous food contact.

Supplier: VWR Collection

These IDP (Intelligent Digital Probe) pH/temperature electrodes can be used with the pHenomenal® MD 8000 H and MD 8000 L multi-parameter meters.

Supplier: schuett-biotec GmbH

The Schuett Solaris is the perfect solution to avoid using naked flames or if gas cartridges are not available. The unit uses standard electrical power and reaches the safe working temperature of 900 to 1300 °C within seconds. No warm-up time, no excess heat, no energy consumption between work cycles. Start is generated by an infra-red sensor, which allows efficient one-handed operation. The integrated timer can be set to 5 or 7 s. Pathogenic material is kept inside the sterilisation chamber. No spreading, no sooting. Ideal for use in Laminar Flow Cabinets. Working angle can be adjusted. Robust and sturdy, no parts subject to mechanical wear, ideal for mobile operation in the field.

Supplier: HAMILTON BONADUZ

These robust combination pH electrodes are suitable for general laboratory applications, especially for measurements in emulsions and suspensions.

Supplier: HAMILTON BONADUZ

These electrodes are especially well suited for Knick® Portamess® equipment. The electrode head creates a hermetic seal with the Portamess® storage tube.

Supplier: CONSORT

Electrode, pH, SP10T (+ ATC/temperature (Pt1000)), single junction, sealed, pH: 0 - 14, 0...+80 °C, Epoxy, Ø×L: 12×110 mm, BNC + 2 banana plugs, 1 m cable, For: Field use, production, education, agriculture

Supplier: HUBER

The Variostat can control the temperature of any size bath from −30 to 150 °C. The special construction gives the user flexibility in a number of different applications. With the infinitely controllable VPC pressure or suction pump, circulation in the respective bath sizes can be adapted for optimum results. Furthermore, the pump pressure for external applications can be set and controlled using the menu control with an optional pressure sensor. Insulated bath vessels are available in stainless steel as an accessory in three standard sizes or can be custom made with any desired dimensions.

Supplier: Heidolph Scientific Products

Modular system for shaking, mixing and heating all in one. Any five kg shaker, e.g. Titramax 1000, Unimax 1010, Promax 1020, Duomax 1030 and Polymax 1040 can be combined with the incubator 1000 and a flat or high hood. The flat hood is recommended especially for microtitre plates, culture plates, small flasks, media bottles and Erlenmeyer flask up to 100 ml. The high hood is ideal for large flasks, media bottles and Erlenmeyer flasks up to 1000 ml. Hoods are made from transparent non-fogging PETG for easy viewing and immediate and convenient access to vessels. The heating module is ideal for use in molecular biology, bacteria cultivation and DNA analysis, it has temperature regulation via a PT100 sensor, and safety circuits prevent overheating.

Supplier: VWR Collection

Thermometer probe, Traceable®, Liquids, air, gas & semi-solids, −50...+150 °C, Ø×L: — mm