Supplier: MEMMERT

Climatic chamber

Supplier: MEMMERT

Climatic chamber

Supplier: MEMMERT

Door, with safety lock, ICH L

Supplier: MEMMERT

Subframe for Memmert UNpa ovens

Supplier: MEMMERT

Reinforced stainless steel grid, For: IPP260plus

Supplier: MEMMERT

Guarantee extension, 1 year, For: SF 30 Plus

Supplier: MEMMERT

Lids must be ordered at the same time as the bath as they can not be retrofitted.

Supplier: MEMMERT

The range includes forced convection models with a temperature range up to 300 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

Humidity chambers which have corrosion resistant, stainless steel inner chamber and housing for long-term climatic tests at constant temperature and humidity. Ideal for food processing, cosmetics, pharmaceutical, biotechnology and electronics industries. Units feature an auto diagnostic system with fault indication for temperature and humidity control. The working chamber is heated on all six sides; this together with electronic humidity control prevents condensation forming in the chamber. Distilled water is supplied from an external 2,5 litre tank by means of a self priming pump. lnternal log memory 1024 kB (ring buffer) for all relevant data, capacity is approximately three months at one minute intervals. GLP/GMP compliance is assisted by the USB interface and 'Celsius' software for programming and documentation.

Supplier: MEMMERT

The range has natural and forced convection models with a temperature range up to 80 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

The ICO series of CO₂ incubators has seamlessly welded, corrosion-resistant stainless steel chambers with rounded edges and no further installations, ensuring easy and thorough cleaning. Models have TwinDISPLAY with a USB port for uploading programs, reading out logs or protecting appliances via the user ID function, and an Ethernet interface as well as a data logger with a 10 year storage capacity. All parameters can be set directly in the ControlCOCKPIT or the AtmoCONTROL software, which uses drag and drop symbols to input values. Battery-buffered ControlCOCKPIT (optional): Operating display, logging and CO₂ control are fully functional even during a power failure.

Supplier: MEMMERT

Sets eco standards for cultivation below room temperature: Unmatched energy efficiency, excellent heat-up, cool-down and recovery times.

Supplier: MEMMERT

These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.

Supplier: MEMMERT

The range of cooled incubators have a temperature range from below zero up to 60 °C, units ensure rapid and precise heating up and cooling down times without energy intensive power bursts. All models have stainless steel inner chamber and housing, ensuring long working life and easy cleaning. These compressor cooled incubators have an integrated data logger and digital timer which is adjustable from one minute to 99 days and 23 hours.

Supplier: MEMMERT

Door with lock (safety lock), for SN110

Supplier: MEMMERT

Door with lock (safety lock), for SN160

Supplier: MEMMERT

Door with lock (safety lock), for SN55plus, For: Steriliser SN55plus

Supplier: MEMMERT

The Memmert environmental test chambers offer rapid and precise temperature changes from -42 to +190 °C and electronic humidity control from 10 to 98% RH. These advanced test chambers feature robust stainless steel inner chamber and housing, ensuring durability and easy cleaning. The CTC/TTC model is ideal for controlled material testing, functional tests, aging tests, or climate tests of composite materials, concrete, plastics, or electronic components in fields such as materials technology, automotive, aerospace and electronics.

Supplier: MEMMERT

Extension plug-in tube, angled, for exhaust air ducting, for U, I, S, For: SF 55 Plus

Supplier: MEMMERT

Extension plug-in tube, angled, for exhaust air ducting, for U, I, S, For: SF 260 Plus

Supplier: MEMMERT

Extension plug-in tube, angled, for exhaust air ducting, for U, I, S, For: SF 260

Supplier: MEMMERT

Extension plug-in tube, angled, for exhaust air ducting, for U, I, S, For: SF 750

Supplier: MEMMERT

Flush-fit unit(stainless steel frame covering gap between oven and wall opening), with air slots, For: SF 450 Plus

Supplier: MEMMERT

Compressed air dehumidification (efficient dehumidification of the interior by means of compressed air) with standard works calibration certificate at +10 °C with 10% rh, ICH750L

Supplier: MEMMERT

Stainless steel perforated shelf, For: HCP150

Supplier: MEMMERT

Non-perforated stainless steel tray with 15 mm rim, For: UF1060

Supplier: MEMMERT

May affect the temperature distribution within the chamber.

Supplier: MEMMERT

Additional Pt100 temperature sensor, positioned flexibly in chamber or load, for local temperature measurement, For: UN110PA

Supplier: MEMMERT

May affect the temperature distribution in the chamber.

Supplier: MEMMERT

Flush-fit unit (stainless steel frame covering gap between oven and wall opening), with air slots, For: SF 160