287 Results for: "Jednotky+filtra\\\\\\\\\\\\\\\\u010Dn\\\\\\\\\\\\\\\\u00ED+membr\"

Supplier: SARSTEDT

These superior quality filter tips are manufactured in a controlled production environment that complies with the strictest purity standards. The filter insert serves as an aerosol barrier protecting the pipette against contaminations, enabling safe pipetting of DN or RNA, toxic or infectious samples.

Supplier: Thermo Scientific

Vacuum drying ovens with stainless steel chambers, vacuum fittings, tubing and ball valve. Units are designed for gentle drying of heat-sensitive samples and have adjustable temperature limit protection, protection Class 2 (DIN 12880, Part 1).

Supplier: Thermo Fisher Scientific

Super Clean™, Cartridge filter base plate, dual base. For air and fuel gas, for 2 ×combi filter

Supplier: KARTELL

These filter tips made from PP are designed for use in molecular biology, cell cultures, bacteriology, virology, immunology and radioimmunology. Hydrophobic PE filters act as a barrier against aerosol contamination, preventing cross-contamination of samples and micropipettes.

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: IKA

Shakers for smooth mixing tasks, 2D models feature a rocking motion and 3D units have three dimensional tumbling motion, basic models have fixed shaking angle and the digital units feature adjustable speed and shaking angle. Used for homogeneous mixing in flasks, culture flasks, Petri dishes and tubes. 3D shakers are ideal for cultivation of cell cultures, DNA extractions, distribution of cells and staining and destaining cells. Even with load and voltage fluctuations, shaking speed remains constant. Different attachments enable the units to be used for a variety of applications.

Supplier: Whatman products (Cytiva)

PS syringe filter holder for clarification and sterile filtration of liquids and gases under pressure.

Supplier: Nitritex

Face masks made from 3 ply, PP/PE, ultrasonically bonded fabric with integrated anti-fog visors. The outer facing consists of hydrophobic non woven PE, the filter layer of meltblown PE and the inner facing of hydrophilic PP/PE (Non woven).

Supplier: Brand

These filter tips have a PE filter that is free from chemical additives and therefore prevents contamination of the samples. Permeability is controlled by the combination of pore size and filter length, so that no aerosols can reach the pipette shaft. The filters function with consistent reliability. However, if liquids accidently contact the filter, they pass very slowly. Since the filter does not swell, the sample can be recovered from the filter by simply actuating the pipette's blow-out function, or by centrifugation if necessary.

Supplier: Sartorius

Sartolab® MultiStation is a stand especially designed to hold one to six vacuum filtration units. It allows the simultaneous filtration of multiple samples.

Supplier: VWR Collection

Transparent polycarbonate baths keep samples visible, units feature user friendly MX temperature controller with three control buttons and on-screen prompts.

Supplier: SciLabware

Filter holder with porosity grade 3 sintered glass disc to support 25 mm membranes.

Supplier: MEMMERT

The range has natural and forced convection models with a temperature range up to 80 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: WTW

Optical dissolved oxygen probes for field and laboratory applications. For use with IDS meters.

Supplier: Binder

Avantgarde. Line incubators ensure stable and reliable incubation of microbiological cultures and guarantee reproducible results for routine tests in the laboratory – even high batch throughputs and with long-term operation. Avantgarde. Line BD models have natural convection ensuring rapid temperature equalisation after the door is opened. The BF models have forced convection via a fan. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution, excellent temperature uniformity and low fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Sartorius

This syringe filter holder is made from PTFE. It is well suited for particle removal from samples and reagents for analytical methods, such as NMR samples as it is unaffected by chemicals and contains no trace elements which could be released into the liquid being filtered.

Supplier: MEMMERT

The range has natural and forced convection models with a temperature range up to 80 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: Thermo Fisher Scientific

Heratherm® General Protocol incubators feature a smooth stainless steel inner chamber with an internal glass door, allowing samples to be viewed without impacting on temperature stability with natural convection providing gentle airflow and minimal drying. These units are recommended for a wide range of routine laboratory applications in pharmaceutical, medical, food and research laboratories and for microbiology and yeast growth. Units have an easy calibration routine and provide enhanced sample safety with an automatic over-temperature alarm to protect samples and incubator.

Supplier: MIELE

Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Supplier: Binder

The MKF series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for industrial material testing and environment simulation applications. The units are ideal for rapid temperature changes with humidity control and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: JULABO GmbH

The MAGIO™ series of heating circulators operate with a working temperature range of 20 to +300 °C and heating capacity of up to 3 kW. With their powerful pressure/suction pump the MAGIO™ units are ideal for external temperature applications. An extensive range of accessories and excellent dynamics mean that the MAGIO™ circulators can be modularly and individually adapted to applications.

Supplier: Binder

The MFK series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for complex standards-based climatic testing. The units are ideal for rapid temperature changes with humidity control with a low temperature range down to –70 °C and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: Binder

With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: IKA

These entry-level evaporators are ideal for all standard evaporation applications in universities and research laboratories. The functions of the RV10 control have been extended and improved to enable fully automatic distillation: With automatic boiling point determination, an integrated solvent library and the option to connect a speed-controlled vacuum pump.

Supplier: Cytiva (Formerly Pall Lab)

Remove endotoxin from water, buffer, neutral sugars and certain biological solutions. Also for plasmid preparation for transfection.

Supplier: LABCONCO

The FreeZone® Triad™ freeze drying system is an all inclusive bench top lyophiliser for 4 samples on the left side and stoppering tray dryer processing shelf. The processing shelf holds up to 441×3 ml serum bottles and the four valves hold samples in flasks, serum bottles or ampoules. Samples for both types of freeze drying can be run at once. The chamber pre-freezes samples to save money and time, eliminating the need for a separate freezer and product transfer.

Supplier: VWR Collection

For test sieves up to 400 mm diameter or square sieves up to 500×500 mm. The UWL 400 is an efficient test sieve shaker that achieves optimum results for large feed quantities. It creates a three-dimensional sieving action, and is especially designed for coarse grained products. The UWL 400 T is suitable for dry sieving; the UWL 400 N is suitable for wet sieving, and the UWL 400 H is suitable for square test sieves with beechwood frames.

Supplier: Sartorius

This syringe filter holder is made from stainless steel. PTFE coated surface on the top provides leak proof sealing, and the chemical compatibility depends upon the filter inserted.

Supplier: Bel-Art Products, a Part of SP

SCIENCEWARE®, Neoprene, Filter seal, Vac-Ring™, black, for funnel stems up to 22 mm Ø, thickness 9,5 mm and O.Ø 76 mm

Supplier: VWR Collection

Storage boxes for convenient, safe storage and transportation of sample vials and sample bottles. A selection of boxes to securely hold a wide range of vial sizes. Ideal for space-saving storage in fridges, as the transparent lid prevents condensation on the closures so avoiding contamination in the cooling unit.