1163 Results for: "Industrial Physics"

Supplier: Industrial Physics

Durometers for measuring impression hardness of soft materials.

Supplier: Industrial Physics

The Colorbox is used to provide the illumination conditions for any visual inspection at a 45° angle.

Supplier: Industrial Physics

Clamp-type probes to measure object temperature (480 °C).

Supplier: Industrial Physics

Small and elegant clamp-type probes to measure temperature of any object.

Supplier: Industrial Physics

Easy to use digital sound level meter with wide dynamic range, 30 to 130 dB in the frequency range 31,5 Hz to 8 kHz

Supplier: Industrial Physics

Lory viscosity cup designed for quick measurements on location or during production processes.

Supplier: Industrial Physics

Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Supplier: Industrial Physics

RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Supplier: Industrial Physics

Electronic coating gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals with all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes.

Supplier: Industrial Physics

These coated metal calibration standards consist of a set of four calibration plates.

Supplier: Industrial Physics

The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Supplier: Industrial Physics

Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Supplier: Industrial Physics

Test panels are used to enhance reproducibility of physical and chemical tests. Each panel is equipped with a hole for hanging and handling.

Supplier: Industrial Physics

Simple hand-held digital thermo/hygrometer.

Supplier: Industrial Physics

Spare knife, round, 1 mm, acc. to ISO 2409 & ASTM D3359, suitable for C1000 test kits

Supplier: Industrial Physics

Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Supplier: Industrial Physics

This automatic adhesion tester measures the adhesion of coatings applied on metal, wood, concrete and similar substrates.

Supplier: Industrial Physics

mini LIGNO classic+ is a wood moisture meter that provide four wood groups and 16 single species of wood.

Supplier: Industrial Physics

Plasticine for Karsten tube penetration test, 250 g

Supplier: Industrial Physics

mini LIGNO duo is a wood moisture meter that provides four different base-wood groups, eight building materials, such as gypsum or screed.

Supplier: Industrial Physics

The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Supplier: Industrial Physics

Shore hardness gauge test stand with weight, for Durometer shore A + D type, 160×114×290 mm, 5,72 kg, For: Durometers shore

Supplier: Industrial Physics

Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.

Supplier: Industrial Physics

profi LIGNO are moisture meters specifically designed for wood and building materials such as screed or gypsum.

Supplier: Industrial Physics

SSPC-VIS 2 pictorial provides a method of evaluating degree of rusting on painted steel surfaces.

Supplier: Industrial Physics

This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

Supplier: Industrial Physics

This digital tachometer is designed to be used for both contact and non-contact measurements.

Supplier: Industrial Physics

Accessory for coating tester, Water resistant marker

Supplier: Industrial Physics

This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

Supplier: Industrial Physics

The MaxiLigno are equipped with the latest technology for precision and easy handling.