1048 Results for: "Hanna"

Supplier: Hanna

HI 98160 is a pH/mV meter housed in a waterproof casing. Up to five point calibration is available with eight memorised pH buffers and two custom pH buffers to provide users with the flexibility necessary to adjust the calibration range to obtain the most accurate and precise readings.

Supplier: Hanna

Sodium chloride

Supplier: Hanna

This pH meter is a portable, lightweight meter with two button operation that is simple to use. It is specifically designed for boiler water or cooling tower water measurements. It is delivered with a rugged pH electrode protected by a titanium body that is perfect for the pH measurement of treated boiler, feed water and steam condensate.

Supplier: Hanna

HI 9063 K-type thermocouple thermometer features auto ranging, enhanced accuracy, and display current temperature along with the high and low extremes achieved during the measuring session on the LCD. The HOLD button freezes the display to allow the user time to record readings. The °C/°F button switches between the Celsius and Fahrenheit temperature scale. The CLEAR button assigns the reading to high and low temperature values.

Supplier: Hanna

This handheld thermometer measures temperatures up to 1350 °C.

Supplier: Hanna

These four-wire PT100 thermometers are housed in a compact, ergonomic casing with a wrist-strap to make it easy for carrying in a laboratory or plant. They offer a range of probes for measurement in gases, air, liquid and semisolids.

Supplier: Hanna

This waterproof, portable pH and temperature meter is supplied with a flat tip probe specifically designed for use in plating baths. The HI 62911D pre-amplified, double junction pH probe features a recessed flat tip that is easy to clean and prevents solids in solutions from collecting on the sensor. The titanium body of the HI 62911D functions as a potential matching pin for increased stability of readings and extended sensor life.

Supplier: Hanna

The HI1291D is a PEI body, single ceramic junction pH electrode with a DIN connector for use with the HI207 and HI208 pH meters. This design consideration is ideal for general laboratory use.

Supplier: Hanna

This pocket tester is specifically designed to directly measure soil conductivity and temperature. With a temperature sensor in the penetration probe, measurements are automatically temperature-compensated.

Supplier: Hanna

This meter accurately monitors the salinity, the concentration of sodium chloride, in aquaculture systems.

Supplier: Hanna

Electrode, Dissolved Oxygen, HI 76407/4F, 4 m cable

Supplier: Hanna

Heavy duty waterproof pH meters designed with the latest microprocessor technology to provide accurate and reliable results under harsh industrial conditions.

Supplier: Hanna

Total chlorine liquid reagents are used for the colorimetric determination of total and free chlorine, for use with Hanna’s compatible benchtop and portable photometers.

Supplier: Hanna

Humidity chamber

Supplier: Hanna

These pH electrodes are suitable for measuring the pH value in different types of food.

Supplier: Hanna

HI 98172 is a pH/ORP/ISE meter housed in a waterproof casing. Up to five point pH calibration is available with seven memorised pH buffers and five custom pH buffers to provide users with the flexibility necessary to adjust the calibration range to obtain the most accurate and precise readings. The pH sensor can be replaced by an ORP sensor to obtain mV readings. ISE sensors are calibrated up to five points and measurements are displayed in ppm.

Supplier: Hanna

HI 97500 is a portable lux meter designed for taking rapid light measurements simply and accurately.

Supplier: Hanna

The water resistant pH indicator HI 981401N has been designed to meet the grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.

Supplier: Hanna

This photometer is dedicated to critical environmental testing. Parameters such as pH, dissolved oxygen, nitrite, ammonia, chlorine and phosphorus or pollutants (chromium VI, nickel, silver, zinc) can be monitored.

Supplier: Hanna

HI 8427 and HI 931001 are portable pH/mV simulators designed specifically for calibrating pH and mV (ORP) meters.

Supplier: Hanna

These liquid membrane electrodes are available as single half-cells or as combination electrodes complete with reference electrode.

Supplier: Hanna

These test kit tests the hardness level as mg/L (ppm) calcium carbonate through an EDTA (ethylene diamine tetraacetic acid) titration.

Supplier: Hanna

Wire temperature thermocouple probe to measure temperature inside ovens. Stainless steel sensor, with the response time of 4 seconds.

Supplier: Hanna

The HI 22091 pH/mV meter with Manual Temperature Compensation (MTC) and analog output provides a simple to use, cost effective method of measuring pH. The HI 22091 replaces PH 209R and features a large, easy to read LCD, built-in solution holders and an attractive redesigned case.

Supplier: Hanna

Fluoride standard solutions are used to calibrate all instruments that measure fluoride using a fluoride ISE. The most common applications include drinking water, the analysis of water from springs close to volcanic rocks or products.

Supplier: Hanna

The HI 98201 is an ORP tester that utilises a platinum electrode and a unique renewable cloth junction that can be pulled out when clogging occurs, reactivating the reference and restoring the electrode. This tester is ideal for swimming pools and spas and can provide a valuable indication of water quality.

Supplier: Hanna

KEY® C pocket thermometer with an interchangeable probe for quick spot measurements. With a fast response time, it is ideal for quality control and industrial temperature monitoring.

Supplier: Hanna

Thanks to its conical probe, this digital thermometer is suitable for food applications.

Supplier: Hanna

This model has been designed for monitoring the temperatures of liquids, semi-solids and refrigerated foods. A CAL CHECK™ function can confirm the accuracy at any time.

Supplier: Hanna

Electrode, pH, pH electrode HI1093B, with micro bulb, refillable, pH: 0 - 13, −5...+100 °C, Glass, Diaphr.: Open junction, Electrolyte: Viscolene, Ø×L: 3×130 mm, BNC, 1 m cable, For: NMR tubes