1048 Results for: "Hanna"

Supplier: Hanna

Electrode, Conductivity, Edge™, Conductivity sensor HI 763100, 4-ring, with temperature sensor, For: General purposes, Platinum, easyPlug 3,5 mm

Supplier: Hanna

Handheld thermo-hygrometer is a compact, portable and designed to provide peak performance and high accuracy temperature and relative humidity (RH) readings anywhere.

Supplier: Hanna

Pure Water Test (PWT) enables users to check the purity of distilled or demineralized water in laboratory or industrial environments. PWT is suited for fields such as printed circuit board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralised or pure water is used.

Supplier: Hanna

This cantilever stand holds three electrodes in any position.

Supplier: Hanna

This handheld conductivity meter has been designed for use in areas of production and quality control. The meter utilises four ring potentiometric probes that offer greater versatility over typical amperometric designs. These rugged probes are made of PVC — ideal for indoor, as well as outdoor measurements.

Supplier: Hanna

These ion selective electrodes are available as solid state half-cell sensors that require a separate reference or as combination electrodes complete with reference electrode. They are designed for measurements of either cyanide, cupric or fluoride ions in aqueous solutions.

Supplier: Hanna

Plastic, translucent.

Supplier: Hanna

These waterproof meters are designed for taking pH, conductivity (EC), TDS and temperature measurements. All three models are ideal for hydroponics, greenhouses, farming and ground water applications. They are also designed to withstand harsh environments such as fertiliser solutions.

Supplier: Hanna

AmpHel® electrodes with PEI body incorporate a miniaturised amplifier which resolves most of the problems associated with high impedance signals.

Supplier: Hanna

These stainless steel K-type thermocouple probes are used with Key® temperature tester.

Supplier: Hanna

These professional bench meters are designed to provide high accuracy and ease of use both in the laboratory as well as in harsh industrial conditions. HI 3221 features ISE measurement modes (in ppm).

Supplier: Hanna

These dosing pumps are manufactured to the highest level of mechanical precision, capable of resisting the negative effects of most aggressive chemicals.

Supplier: Hanna

High accuracy bench turbidity meter designed for water testing.

Supplier: Hanna

This potentiometric titrator with one analogue input channel can perform acid/base, redox (ORP), complexometric, precipitation, non-aqueous, argentometric, and ion selective titrations, as well as back titrations and titre determinations.

Supplier: Hanna

The HI 5221 is an advanced research grade benchtop pH/mV meter that is completely customisable with a large colour LCD, capacitive touch keys, and USB port for computer connectivity.

Supplier: Hanna

This meter has been designed for simplicity of use while still retaining measurement accuracy. The housing of this instrument has been completely sealed against humidity for use in harsh environments.

Supplier: Hanna

This benchtop meter measures conductivity, TDS, NaCl and temperature. In conductivity and TDS ranges (up to 500 mS/cm and 400 g/l respectively) the instrument automatically chooses the best scale to maintain the highest accuracy.

Supplier: Hanna

HI 98121 is a waterproof pH, ORP and temperature meter. The housing has been completely sealed against humidity and designed to float. All pH readings are automatically temperature compensated (ATC), and temperature values can be displayed in °C or °F units.

Supplier: Hanna

Electrode, Dissolved Oxygen, Edge™, DO electrode HI 764080, polarographic, with temperature sensor, easyPlug 3,5 mm

Supplier: Hanna

This portable innovative meter uses the HANNA instruments® intelligent electrodes. These pH electrodes incorporate a chip which memorises the calibration data performed with a specific instrument. When the 'intelligent' electrode is attached to the meter again, it is automatically recognised. This technology allows the operator to optimise time and efficiency with unsurpassed safety. It avoids erroneous measurements taken in the event the pH electrode is substituted after calibration. This series of electrodes also incorporates a temperature sensor, eliminating the need for an additional temperature probe.

Supplier: Hanna

HI 991001 meter offers IP 67 waterproof protection in a compact case.

Supplier: Hanna

This compact, waterproof pH/temperature meter is designed for quality checks in the meat processing industry. The FC 232D pre-amplified pH electrode and removable stainless steel blade enable users to perform unintrusive measurements on meat products. The free diffusion junction helps to avoid a clogged reference and the external body material is non toxic and food compatible.

Supplier: Hanna

The HI 98703 is specially designed for water quality measurements.

Supplier: Hanna

The HI99556 is an infrared and contact thermometer designed to measure both surface and core temperatures for the food industry. With an external probe, a quick, one-second infrared response time, a HOLD function, and battery life indicator, this thermometer is an ideal solution for temperature measurements in the food industry.

Supplier: Hanna

The HI 98201 is an ORP tester that utilises a platinum electrode and a unique renewable cloth junction that can be pulled out when clogging occurs, reactivating the reference and restoring the electrode. This tester is ideal for swimming pools and spas and can provide a valuable indication of water quality.

Supplier: Hanna

These test kit tests the hardness level as mg/L (ppm) calcium carbonate through an EDTA (ethylene diamine tetraacetic acid) titration.

Supplier: Hanna

Fluoride standard solutions are used to calibrate all instruments that measure fluoride using a fluoride ISE. The most common applications include drinking water, the analysis of water from springs close to volcanic rocks or products.

Supplier: Hanna

These pH electrodes are suitable for measuring the pH value in different types of food.

Supplier: Hanna

The HI 22091 pH/mV meter with Manual Temperature Compensation (MTC) and analog output provides a simple to use, cost effective method of measuring pH. The HI 22091 replaces PH 209R and features a large, easy to read LCD, built-in solution holders and an attractive redesigned case.

Supplier: Hanna

HI 8427 and HI 931001 are portable pH/mV simulators designed specifically for calibrating pH and mV (ORP) meters.