Supplier: KEYSTONE CLEANROOM PRODUCTS

PureClean™ self-sealing autoclave bags are made from a transparent film and 1421B DuPont™ Tyvek®, which is a new grade of uncoated, untreated, flexible Tyvek® material specifically designed for pharmaceutical use in steam sterilisation applications. Uncoated Tyvek® eliminates the potential of residue deposits on equipment, post sterilisation.

Supplier: IKA

SBS (Steel Ball Bearing, Suspended) rotational viscometers extend a large part of the application spectrum of the IKA ROTAVISC device family.

Supplier: Nitritex

These disposable overalls made from CleanTough™ fabric provide good protection against hazardous dusts (including nuclear particles) and limited protection against chemical splashes. Available with hood or with collar.

Supplier: VELP SCIENTIFIC

Measurement system without mercury for determination of the amount of dissolved oxygen consumed by aerobic biological microorganisms in water. The sensor uses manometric technology and micrprocessor control to provide regular data measurements over defined periods.

Supplier: MILLIPORE

Nylon filters are compatible with a broad range of solvents. Two types of filters are available, membrane filters with pore sizes ranging from 0,20 to 1,20 µm and woven net filters with mesh openings ranging from 10 to 180 µm.

Supplier: VWR Collection

PE bags, transparent. These sterile sampling bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. Economical and efficient way to collect, contain and carry samples. With these bags, the user can bring sterile sampling bags into a cleanroom without any worries about contamination. The bags are double-pouched so the user can remove the outer bag before entering the cleanroom, which minimises the number of bags exposed.

Supplier: Avantor

Avantor® ACE® HILIC-A columns have been designed specifically for HILIC applications and are especially useful for the separation of polar analytes. These columns are part of a suit of 3 proprietary HILIC columns (HILIC-A, HILIC-B and HILIC-N) developed to enable chromatographers to achieve reproducible and successful HILIC separations using a systematic approach to method development.

Supplier: Brady

This durable, low-shrink vinyl with ultra-aggressive adhesive is ideal for labelling pipes, equipment, shelves, and nearly any other industrial surface.

Supplier: VARIAN

Bond Elut™ C8 is very similar in properties to C18, but is not as retentive for non-polar compounds, due to its shorter hydrocarbon chain, and therefore reduced carbon loading. C8 is an excellent replacement for C18 when analytes are too strongly retained for effective elution. The potential for polar interactions is somewhat higher than for C18 because there is less coverage of the silica surface. These polar interactions are not, however, a significant property of C8.

Supplier: Hach

Cuvette test for the determination or free chlorine, 0,05 to 2,0 mg/L Cl₂ and chlorine dioxide, 0,09 to 3,8 mg/L ClO₂. Pre-dosed reagents for maximum safety.

Supplier: MICROSOLV

Cogent TYPE-C Silica™ is HPLC grade silica with a silica hydride surface. Their unique stationary phase will adsorb and desorb solvents commonly used in mobile phases very differently from ordinary silica resulting in excellent benefits to the chromatographer. Excellent for normal phase chromatography and solvent drying is not needed.

Supplier: QUARTZTECHNISCHE WERKSTATTEN

Crucible lid, For Ø: 50 mm, Quartz

Supplier: EBRO

The SL3101 set by ebro, featuring five EBI 12-T471 and one EBI 12-TP453 loggers in silicone protection boxes, is ideal for validating large sterilisers and autoclaves in demanding environments.

Supplier: EBRO

The SL3001 set by ebro, featuring the EBI 12-TP453 temperature and pressure logger, is specially designed for the validation and monitoring of small sterilizers and autoclaves, ensuring consistent sterilization standards.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Improve the prep time, performance, microbial barrier and cleanliness of your autoclave peel pouches.

Supplier: Beckman Coulter

The Avanti J-HC three-phase high capacity centrifuge provides a complete solution for batch bioprocessing, three-phase separation filters the materials into liquids, gases, and solids. A maximum of 9 litres can be spun at speeds of 5000 min⁻¹ and 7480 ×g for greater sample throughput. This allows processing of up to 36 liters per hour when harvesting bacteria. Enhanced operator safety is provided with disposable Harvest Line System Liners. The Avanti J-HC's Friction Reduction System (FRS) allows for quicker, quieter, and cooler runs. Features include a high-torque, energy efficient drive for the fastest acceleration and deceleration possible with gentle precision.

Supplier: Brady

PermaSleeve® PS Heat-Shrink Polyolefin (B-342) wire marking sleeves combine speed, ease of use, and permanence to create long-lasting, high-quality identification.

Supplier: Sartorius Balances

The WZA-NC series provide a readability of 1/10 µg for the weighing capacity of 20/240 g. The weighing system
as well the electronic are designed for space sensitive applications in stainless steel housings.

Supplier: VWR Collection

Designed for freezing samples in all cryopreservation applications, these vials feature an internal thread with washer, or an external thread.

Supplier: VWR Collection

These precise instruments measure dissolved oxygen in % and ppm (mg/L) and temperature. A built-in microprocessor stores, calculates and compensates for all parameters related to DO determinations.

Supplier: Brady

Easily differentiate lab samples with the B-494 colour polyester labels, available in six colour options. Pair with a versatile Brady portable label printer and print almost anywhere.

Supplier: Thermo Fisher Scientific

Armadillo™ 384-well PCR plates combine the rigidity of a polycarbonate frame with thin walled polypropylene wells to provide superior thermal cycling performance under all conditions, without warping. All formats are available with clear or white wells, ensuring the highest level of sensitivity for all PCR and qPCR reactions.

Supplier: CHIRAL TECHNOLOGIES

These columns allow chromatographers to employ essentially any organic solvent as mobile phase to develop methods for the most challenging separations. These columns are available in a variety of particle sizes and offer great speed and column resolving power. Columns packed with 3 µm CSPs offer high speed separations and a reduction in analysis time and cost per sample. Columns, packed with 3 µm particles, may be used in conventional HPLC units without significant loss in performance, even with the smaller column dimensions.

Supplier: Portwest

This fleece jacket made of 100% polyester with anti-pilling finish offers great warmth and comfort to the wearer.

Supplier: GILSON

Designed for performance and comfort, PIPETMAN® L comes in a comprehensive range of models, adapted to your needs in the lab. PIPETMAN L air-displacement pipettes cover a full volume range. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettes confidently in your applications.

Supplier: FRISTADS KANSAS

Durable trousers made of 65% polyester and 35% cotton.

Supplier: FRISTADS KANSAS

Two-colour working trousers with contrast stitching, made of 65% polyester and 35% cotton.

Supplier: VWR Collection

ND8 screw neck vials are manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of polypropylene seal styles and septa materials.

Supplier: LEICA MICROSYSTEMS

The objective lens is a critical part of the microscope optics. The microscope objective is positioned near the sample, specimen, or object being observed. It has a very important role in imaging, as it forms the first magnified image of the sample.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Improve the prep time, performance, microbial barrier, and cleanliness of your autoclave peel pouches.