656 Results for: "Filtry+odvzdu\\u0161\\u0148ovací"

Supplier: Thermo Fisher Scientific

This in-line filter removes contamination from gas with easy-to-use filters. Reuseable end-fittings containing needle valves remain installed during filter changes, preventing contamination and reducing the cost of clean gas.

Supplier: RPB SAFETY

The RPB radex 2 outlet breathing air filter is designed to filter compressed breathing air of contaminants such as particulates down to 0,15 µm, odors, tastes, and moisture, in accordance with EN 12021 requirements.

Supplier: Avantor

These precolumn filters with PEEK body and stainless steel frit provide protection for analytical and microbore columns. They connect directly to the column without the need for an additional holder.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Cytiva

Mono-functional maleimides are particularly suitable for the selective labelling of molecules containing free sulfhydryl groups, such as cysteine residues in proteins and peptides and oligonucleotides.

Supplier: MACHEREY-NAGEL

MN 619 is a dense filter paper with very high particle retention and slow flow rate. Excellent clarifying capacity for cloudy suspensions and for water and soil analysis.

Supplier: Merck

Membrane filter, Membrane: Mixed cellulose ester, Sterile, Type: Sterile pak (SO), white, plain, Pore size: 0,80 µm, Ø: 47 mm

Supplier: ENTEGRIS

These cartridge filters are designed for the removal of particles and microorganisms from liquids and gases. Used in clarification and prefiltration applications, these pleated filters retain contaminants primarily on the surface of the filter media. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Supplier: ROBU GLASFILTER

ROBU® degassing filter with integrated VitraPOR® filter ensures efficient solvent degassing with inert gases, combined with reliable filtration. Ideal for chromatography and analytical applications, it offers high chemical and thermal resistance.

Supplier: Bohlender

These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Supplier: EDWARDS HIGH VACUUM METTLER

Mist filters are used to separate and trap oil mist and dischage the odours with the exhaust from oil sealed rotary vacuum pumps.

Supplier: Sartorius

Gelatine membrane filters in conjunction with the MD8 air samplers (gelatine filter method) are used for the collection of airborne microbes and viruses. These filters are completely water-soluble, therefore, microbes in one sample can be cultivated in different nutrient media or low and high bacteria counts can be measured.

Supplier: ENTEGRIS

These filters are designed to consistantly remove particles from a whide range of acids, bases and other process materials. Ideal for medium to high flow applications, they deliver a low cost of ownership (COO) as a dry device or prewet product ready for quick installation. Prewet cartridges prevent alcohol-chemical interactions, avoid potential contamination sources and minimise process downtime.

Supplier: MACHEREY-NAGEL

MN 617 is a fast filter paper with excellent retention of coarse particles and gelatinous precipitates. This soft filter paper is used for example in routine clean up of biological or organic solutions.

Supplier: MACHEREY-NAGEL

MN 640 we is the fastest quantitative filter paper with highest flow rate for general laboratory filtration. It is used for example in analytical procedures of samples with coarse or gelatinous particles.

Supplier: Sartorius

Cellulose acetate hydrophilic membrane filters. Ideal for biological and clinical analysis, sterility tests and scintillation measurements. Very low protein binding capacity, suitable for aqueous, alcoholic media and hot gases.

Supplier: MACHEREY-NAGEL

MN 618 is a thick filter paper with medium flow rates and finer retention. It's higher loading capacity than thinner papers makes it especially useful for the filtration of large quantities of liquids.

Supplier: Bohlender

PTFE filtration unit made with cone for connection to a vessel and socket.

Supplier: MACHEREY-NAGEL

MN 619 de is an extra dense filter paper for excellent clarification of cloudy suspensions. Maximum retention capacity in qualitative range for fine particle filtration e.g. in chemical analysis.

Supplier: Corning

The Corning® HYPERStack® cell culture vessel is a closed system that allows fluid manipulations to occur through preassembled tubing sets. Two ³/₈" ID tubing ports for filling and venting allow filling via bag assembly, sterile bottle connection or pumping. The attached vent filters are 0,2 μm pore, hydrophobic membranes that allow air displacement during filling while minimising the risk of contamination.

Supplier: Ahlstrom-Munksjö

These gridded sterile membranes are specifically designed to save time when performing colony counting and microbiological quality control. The plain white non-sterile microfiltration membranes are used to remove particles and microorganisms from various organic solvents and aqueous solutions.

Supplier: Hach

These membrane filters are ideal for filtration of total and fecal coliforms, E. coli, Streptococcus species, heterotrophic bacteria and fungi.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Sartorius

Membrane filters manufactured from high grade PC film using track etch technology. Applicable for particulate analysis, epifluorescence miroscopy, fluid clarification, cytology, cell biology, bioassays, water microbiology, environmental analysis.

Supplier: MACHEREY-NAGEL

MN 615 is the most widely used general purpose filter paper with medium retention and flow rate. This filter paper covers a wide range of laboratory applications and is frequently used for clarifying liquids.

Supplier: VWR Collection

Upright metallurgical microscope with IOS W-plan MET objectives for routine and educational laboratory applications. With LED lighting source both for incident and transmitted illumination.

Supplier: VICI JOUR RESEARCH

Precolumn filter kit has a standard 10 to 32 fitting and fits direct to most column types without introducing an additional dead volume.