656 Results for: "Filtry+odvzdu\\u0161\\u0148ovací"

Supplier: ENTEGRIS

These cartridge filters provide small particle retention to ensure minimal particles remain on the water surface. High purity connections with no O-ring to avoid potential source of contamination ensuring downstream cleanliness.

Supplier: ENTEGRIS

Liquid photochemical filters designed for developer, DI water and solvent applications in POU photolithography processes.

Supplier: Cytiva (Formerly Pall Lab)

Inherently low ash membrane ideally suited for multiple NIOSH analytical methods.

Supplier: Sartorius

PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide.

Supplier: ENTEGRIS

These filter disc series with non-woven PP media can be used for simple, quick and efficient filtration of fluids used in laboratory, pilot and small scale applications. Can be used for clarification of acids, bases and solvents.

Supplier: Cytiva (Formerly Pall Lab)

Contrasting hydrophilic modified black PES membrane for microbiological analysis.

Supplier: Portwest

P906 filters are anti-gas filter that protects against contaminant gases. Equipped with a standard threaded connection conforming to EN 148-1 and can be used on full face masks equipped with the same standard connection.

Supplier: MACHEREY-NAGEL

MN 616 md is slightly more retentive than MN 615 with a corresponding increase in filtration time.

Supplier: ENTEGRIS

These filters are designed for small to mid volume POU photochemical and solvent filtration needs. They can be used for the hydrophobic filtration of photoresists, thinners and solvents.

Supplier: Cytiva (Formerly Pall Lab)

MicroCheck™ II beverage monitor, is an easy-to-use disposable filter funnel designed to meet the needs for microbial analysis of beverages.

Supplier: Sartorius

Non sterile membrane filters for colony counting, particle testing, microscopy and sterility testing. The membrane filters are made of cellulose nitrate (cellulose ester).

Supplier: Sartorius

These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.

Supplier: MACHEREY-NAGEL

MN 616 is a filter paper with medium retention and flow rate. This filter paper covers a wide range of filtration applications.

Supplier: Sartorius

Regenerated cellulose hydrophilic membrane filters. For filtration of organic solvents. Suitable for particle removal from aqueous solutions and solvents. Low adsorption.

Supplier: ENTEGRIS

These filters are compatible with high purity gases as well as general nitrogen and CDA applications. Available in Bronze and Silver performance levels, they are specifically designed for high flow and low delta pressure applications and provide ultimate process protection by removing contaminants that could affect process quality.

Supplier: Merck

EXtrelut® NT is a specially processed, inert, wide pore kieselguhr with a high pore volume. It has been used for quite some time within research, for the sample preparation of urine, whole blood, plasma and other biological matrices. Other applications include environmental and residue testing such as analysis of industrial, domestic and wastewater. EXtrelut® NT is supplied either pre-packed in cartridges or as a loose sorbent. EXtrelut® NT simplifies liquid-liquid extraction by replacing separation funnels. Using a single step is more efficient, saves solvent, as well as material and time, in contrast to classic funnel separation. The aqueous sample is simply applied to the EXtrelut® NT sorbent. It distributes itself over the chemically-inert matrix so acting as a stationary phase. Subsequently, elution takes place using organic solvents that are non miscible with water. All the lipophilic substances are extracted from the aqueous into the organic phase.

Supplier: MACHEREY-NAGEL

MN 619 eh is slightly more dense than MN 619 with high particle retention and slow flow rate.

Supplier: VICI JOUR RESEARCH

These filters made from stainless steel 316L protect HPLC systems from small particles in the mobile phase.

Supplier: Ahlstrom-Munksjö

These plain white non sterile microfiltration membranes are used to remove particles and microorganisms from various organic solvents and aqueous solutions.

Supplier: Restek

Titanium filter in a stainless steel body with PEEK ferrule. Its design easily fits with all columns.

Supplier: Bel-Art Products, a Part of SP

Immersion filters for filtration involving recovery of solids without having to transfer material to funnels.

Supplier: Whatman products (Cytiva)

These high purity quartz microfibre filters are used in many air sampling filter applications, including sampling of acidic gases, stacks, flues and aerosols. They are suitable for PM-10 sampling and analysis.

Supplier: Sartorius

These membrane filters have high hydrophilicity and exceptionally low non-specific binding characteristics. These membranes are ideal for sample cleaning and protein removal and when high recovery of the filtrate solution is of primary importance.

Supplier: Cytiva (Formerly Pall Lab)

Certified hydrophilic mixed cellulose esters membrane for microbiological analysis meets or surpasses regulatory specifications.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Cytiva (Formerly Pall Lab)

Hydrophilic acrylic polymer Versapor® membrane on non woven support ideal for pre-filtration of difficult to filter solutions and serum.

Supplier: Cytiva (Formerly Pall Lab)

Convenient and reliable concentration, purification and diafiltration of 15 to 60 ml biological samples. Concentrate 60 ml sample volumes to 4 ml in 30 minutes.

Supplier: Whatman products (Cytiva)

QM-C 100% quartz microfiber filter paper features low trace metals and high temperature resistance. It is well-suited for heavy metal analysis of particulate matter and sampling of acidic gases, stacks, flues and aerosols in air monitors.

Supplier: Thermo Fisher Scientific

This in-line filter removes contamination from gas with easy-to-use filters. Reuseable end-fittings containing needle valves remain installed during filter changes, preventing contamination and reducing the cost of clean gas.

Supplier: Cytiva

Mono-functional maleimides are particularly suitable for the selective labelling of molecules containing free sulfhydryl groups, such as cysteine residues in proteins and peptides and oligonucleotides.