9687 Results for: "ENTEGRIS"

Supplier: ENTEGRIS

Two snap latches, one swing pin latch or three swing pin latches. Pin and socket hinges.

Supplier: ENTEGRIS

Wafer handling trays to safely transport and protect silicon wafers.

Supplier: ENTEGRIS

Wafergard®, PFA compression ferrules and nuts, 6,34 mm, For: Inline gas filters, Wafergard® GT-Plus

Supplier: ENTEGRIS

Ultrapak® series multiple wafer shipping boxes are made of Ultrapure polypropylene materials that provide a clean shipping environment and assure low levels of condensable inorganics.

Supplier: ENTEGRIS

Ultrapak® series multiple wafer shipping boxes are made of Ultrapure polypropylene materials that provide a clean shipping environment and assure low levels of condensable inorganics.

Supplier: ENTEGRIS

These filters provide superior filtration for critical dilute, aqueous and low neutral pH cleaning applications at advanced technology nodes. The clean, dual capture membrane improves process performance and reduces on-wafer defects. In addition to sieving particle capture which is always active, the non sieving retention mechanisms are also active and strongest in conditions where pH is <3 and no surfactant is present.

Supplier: ENTEGRIS

These cartridge filters are designed with all fluoropolymer construction to consistently remove particles from a wide range of acids, bases and other process chemicals.

Supplier: ENTEGRIS

This cartridge filter with high flow and efficient particle removal, ensures rapid particle removal in one-pass and recirculating applications. It eliminates the trace levels of ions and improves the quality of ultrapure water.

Supplier: ENTEGRIS

These filters have been designed for use with photolithography and polyimide process fluids at ambient temperatures.

Supplier: ENTEGRIS

The UPE membrane of these filters eliminates pre-wetting, which optimises the full use of the membrane and ensures maximum flow.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Three and one-half complete turns fully opens or closes the valve for more precise control than a ¹/₄-turn valve. Slower actuation reduces water hammer affect on fluid stream. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosion chemical handling applications.

Supplier: ENTEGRIS

Horizontal wafer shipper.

Supplier: ENTEGRIS

Dipper basket used to clean or etch small pieces.

Supplier: ENTEGRIS

Patented JEDEC thick profile jig tray.

Supplier: ENTEGRIS

Made of PFA, 4100

Supplier: ENTEGRIS

Clean and secure thin wafer transport. Dramatically enhanced performance for thin wafer products.

Supplier: ENTEGRIS

Accessory for flow meters, Cable (1,83 m) with 8-pin mating for NT® Flowmeters (for electrical connector type D00 only)

Supplier: ENTEGRIS

These tube fittings are made from PFA.

Supplier: ENTEGRIS

Made of PFA, DuPont 440.

Supplier: ENTEGRIS

These tube fittings are made from PFA.

Supplier: ENTEGRIS

Holds a wafer or a square plate.

Supplier: ENTEGRIS

These integral ferrule fittings are made from PFA.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosive chemical handling applications.

Supplier: ENTEGRIS

These cartridge filters are designed for the removal of particles and microorganisms from liquids and gases. Used in clarification and prefiltration applications, these pleated filters retain contaminants primarily on the surface of the filter media. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Supplier: ENTEGRIS

The Sentry® QCIII Quick Connect System is the safest and easiest method of connecting FluoroPure® chemical containers with typical bulk chemical delivery systems. This patented connection system is key coded and uses Entegris' industry leading Flaretek® seal for the main chemical dispense line and radial seals for the remaining three ports. This new system allows the connection to be made without realigning key codes. Subsequent ports have radial seals with FEP encapsulated o-rings. This chemical dispense system incorporates a ³/₄" chemical fill/dispense port, ½" vent port, ¼" connection verification port and optional ³/₄" recirculation port.

Supplier: ENTEGRIS

ETFE, white.

Supplier: ENTEGRIS

For masks or reticles with pellicles. Label for identication labels. Landing pads prevent tearing of pellicies.

Supplier: ENTEGRIS

Multipurpose trays for a wide range of uses.

Supplier: ENTEGRIS

Entegris GateKeeper® GPU gas purifiers were designed
to improve purity consistency, lifetime, and final purity in
microelectronics applications where high-purity gas is critical. Leveraging our expertise in material science, we have developed a new generation of HX gas purification products that deliver unsurpassed value and performance.

Supplier: ENTEGRIS

Automated, FIMS compatible SB300 FOSB provides a clean, secure environment for valuable 300 mm wafers as they move through numerous handling and transport processes.