Supplier: Dräger

N/A

Supplier: Dräger

Accessory for gas detection, For: accuro®, Dräger TO 7000 tube opener

Supplier: Dräger

To measure the 'spot concentrations' of nitrous fumes for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

The X-plore® 1700 series offers models in all three EN protection classes: FFP1, FFP2, and FFP3. Available with or without CoolMax™ exhalation valve for reduced exhalation resistance and to avoid a build-up of heat. Odour models for tackling unpleasant odours are equipped with an additional activated carbon layer.

Supplier: Dräger

To measure the 'spot concentrations' of hydrogen sulphide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, measurement of personal exposure in the inhalation area, detection of leaks in, for example, pipelines or gas installations, and air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of hydrogen peroxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of carbon dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of hydrogen fluoride for use with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of ammonia including determination of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces. For use with an Accuro® pump. Other basic substances such as organic amines are indicated as well. For Ammonia 2/a, 5/a, 5b, the indication is not affected by :

Supplier: Dräger

Different gases and vapours can be detected and measured such as concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

Cross sensitivity: Styrene, vinyl acetate, acetaldehyde, acrolein, diesel fuel and furfuryl alcohol are indicated with a yellowish brown discoloration. 500 ppm octane, 5 ppm nitric oxide and 5 ppm nitrogen dioxide have no effect.

Supplier: Dräger

The X-plore® 1300 series offers models in all three EN protection classes: FFP1, FFP2 and FFP3. Available with or without CoolMax™ exhalation valve for reduced exhalation resistance and to avoid a build-up of heat. Odour models for tackling unpleasant odours are equipped with an additional activated carbon layer.

Supplier: Dräger

Range with a Dräger-specific bayonet connection that fits X-plore® 3300/3500 half masks and X-plore® 5500 full face masks.

Supplier: Dräger

Sampling activated tubes for direct measurement indication even with complex compounds and mixtures of substances in air investigations and gas analyses.

Supplier: Dräger

To measure the 'spot concentrations' of sulphur dioxide for use with an Accuro® pump.

Supplier: Dräger

Ergonomic pump for use with short-term tubes.

Supplier: Dräger

To measure the 'spot concentrations' of alcohol for use with an Accuro pump.

Supplier: Dräger

Air flow test tubes, N/A

Supplier: Dräger

To measure the 'spot concentrations' of chlorine for use with an Accuro® pump.

Supplier: Dräger

This air flow indicator for special applications can be used in all operations relating to draught detection.

Supplier: Dräger

To measure the 'spot concentrations' of carbon monoxide for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of hydrochloric acid in the air with an Accuro® pump - Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

The X-plore® Rd40 filter with aluminium housing is suitable for half and full face masks with connectors conforming to EN 148-1.

Supplier: Dräger

The reusable X-plore® 6300 is the successor to the Panorama Nova Standard – redesigned and improved with fresh colours and an integrated bar code.

Supplier: Dräger

To measure the 'spot concentrations' of water vapour for use with an Accuro® pump.

Supplier: Dräger

Operating conditions: 0 to 40 °C ; up to 30 mg/l H₂O and for tube 5/a: 3 to 15 mg/l H₂O absolute humidity.

Supplier: Dräger

X-plore® 5500 full face masks offer the perfect solution wherever your work requires respiratory protection, e.g. in the chemical industry, metalworking and automotive industries, shipbuilding, maintenance, supply and disposal logistics. The double layered face seal with triple sealing action provides reliable protection and a tight fit for all face shapes and sizes. The large visor is available in two different materials: polycarbonate or triplex (excellent anti-scratch coating and high chemical-resistance).

Supplier: Dräger

Wallholder PIN for Parat® Hard Case, ideal for placing stationary units in a central location, can be mounted to any Hard Case using the accessory attachment points

Supplier: Dräger

Half mask particle filter with protection level P100.

Supplier: Dräger

The catalytic Ex sensor has high sensitivity to flammable gases and vapours, which is confirmed by the technical approval for measuring methane to nonane.