3676 Results for: "5-Aminopyridin-3-ol&pageNo=68&view=easy"

Supplier: Avantor

Very popular PEG high polarity MS phase for a wide range of applications, including (for example): essential oils, flavours and fragrances also alkanols. HI-WAX MS is an MS grade low bleeding cross-bonded column.

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Pyramid is an octadecyl modified silica phase with polar endcapping, especially designed for use in eluent systems of up to 100% water.

Supplier: Simport Scientific

This model has a special hinge that holds the base and the cover together. The hinge design allows the cassette to be opened and closed as often as required. It is a front-opening cassette with a 45° smooth writing surface.

Supplier: Brady

The B-494 polyester label is a reliable sample identification and traceability solution.

Supplier: HAMILTON BONADUZ

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Supplier: UVP ULTRA VIOLET PRODUCTS

This benchtop UV Incubator with stainless steel interior is designed to provide precise temperature control and uniformity throughout the chamber. Used for incubation of biological assays, fungal, bacterial cultures, eggs and other biological samples.

Supplier: EBRO

Both data loggers are high-precision temperature and pressure loggers designed for process validation in steam sterilisers, batch control, and pharmaceutical applications. With a wide temperature and pressure range and high accuracy, they provide reliable data logging for critical monitoring processes in sterilisation, healthcare, production, and pharmaceutical environments, ensuring accurate validation and quality control.

Supplier: Avantor Fluid Handling

Versatile piston pump drives for high-accuracy fluid dispensing and delivery – with an intuitive touch-screen interface.

Supplier: Thermo Fisher Scientific

White PC, autoclavable.

Supplier: SI Analytics

These electrodes are low maintenance sensors for heavy duty process applications in the chemical industry. They are ideally suitable for measuring media with extreme ionic strength - whether boiler feed water or brine - also in strongly oxidizing acid and alkali containing media.

Supplier: Avantor

Really versatile general purpose apolar phase for a wide range of applications, including (for example): PCBs, simulated distillation, gases, essential oils, hydrocarbons analysis, pesticides, semivolatiles, oxygenates. HI-1 is a crossbonded phase and assure a long lifetime even under high temperature limits.

Supplier: 3M

3M™ SecureFit™ safety helmet X5500 series provides secure, comfortable, and adjustable head protection for workers in a variety of situations. The helmets feature adjustable positioning and easy-turning, 4-point ratchet suspension systems with the exclusive 3M™ pressure diffusion technology. The X5500 series also feature 3M™ UVicator™ Sensors that indicate damaging levels of ultraviolet (UV) light.

Supplier: VELP SCIENTIFIC

These BOD incubators have been designed to keep any product at a constant temperature, where accurate and precise temperature control is required. For applications where monitoring the sample is extremely important, the I models are ideal. The controlled heating and cooling thermoregulation system enables the user to select an operating temperature between 3 and 50 °C. The E models have wireless connection for TEMPSoft™. The I models have an internal transparent door and wireless connection for TEMPSoft™ and an auto tuning system which provides constant control of the internal temperature, by continuously comparing the detected and set values and aligning them via a precise and rapid adjustment system. All models have two internal sockets.

Supplier: VWR Collection

Water-resistant/shockproof thermometer (IP 64) replaces hazardous mercury units and is ideal for wet labs, wash-down areas, outdoors and virtually all field applications.

Supplier: ProSci Inc.

The protein encoded by TRIM68 contains a RING finger domain, a motif present in a variety of functionally distinct proteins and known to be involved in protein-protein and protein-DNA interactions. TRIM68 is expressed in many cancer cell lines. Its expression in normal tissues, however, was found to be restricted to prostate. TRIM68 was also found to be differentially expressed in androgen-dependent versus androgen-independent prostate cancer cells.

Supplier: ProSci Inc.

The protein encoded by the TRIM68 gene contains a RING finger domain, a motif present in a variety of functionally distinct proteins and known to be involved in protein-protein and protein-DNA interactions. TRIM68 is expressed in many cancer cell lines. Its expression in normal tissues, however, was found to be restricted to prostate. This gene was also found to be differentially expressed in androgen-dependent versus androgen-independent prostate cancer cells.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1422A autoclave bags with drawstrings can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: Avantor

These ultra inert Avantor® ACE® Phenyl columns provide great reproducibility and column lifetime. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative.

Supplier: EBRO

This data logger was developed to check the last rinsing water in the washer disinfector (WD). The measurement takes place during the cleaning program in the WD. An interruption restart of the machine after the water withdrawal is not necessary.

Supplier: VWR Collection

Rugged compact moisture analysers with large backlit dot matrix graphic display for moisture determination of raw materials and finished products in the food, cosmetics, dairy, pharmaceutical, chemical agriculture, construction and ceramics industries.

Supplier: Avantor

Avantor® ACE® C8-300 columns provide great reproducibility and column lifetime. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative.

Supplier: VWR Collection

These mats offer the comfort of a polyurethane mat which is suitable for ISO Class 5 cleanroom (Class 100) environments. It is either available with a bubble surface, that features a unique ergonomic and anti-fatigue design, or with a smooth surface that is ideal for areas that combine sitting and standing.

Supplier: Sartorius Balances

The WZA-N series is the successor of the well established WZA-line. This series focus on weighing resolutions as low as 0,1 mg and capacities of up to 8200 g.

Supplier: VWR Collection

The EML 200 series offers different types of units. All models are suitable for 50 to 203 mm Ø sieves, a maximum sample/batch load of 3 kg, and have a cast aluminium housing and improved clamping system.

Supplier: Thermo Fisher Scientific

Solaris incubated orbital shakers feature Peltier chillers, units have a compact footprint, are designed to fit on the benchtop, user programmability for easy setup and reproducibility plus connectivity for easy monitoring.

Supplier: Thermo Fisher Scientific

Solaris incubated refrigerated orbital shakers feature Peltier chillers, units have a compact footprint, are designed to fit on the benchtop, user programmability for easy setup and reproducibility plus connectivity for easy monitoring.

Supplier: Avantor

Avantor® ACE® AQ columns provide great reproducibility and column lifetime. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative.

Supplier: GA

Transparent cryogenic self-laminating labels for thermal transfer printers. Their clear laminate protects the printed information from alcohols and detergents to ensure the secure identification of tubes and cryo vials. These labels will also withstand prolonged storage under cryogenic conditions, including in liquid phase and vapor phase liquid nitrogen.