You searched for: Environmental Test Kits

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request). Spectroquant® cell test kits.

Supplier: Merck

Typically used to determine whether containers filled with Liquids (not miscible with water) such as engine fuels and oils that may contain water below the oil Liquid Layer. The paste is applied to any suitable dipstick, which is then inserted into the container. The paste changes colour on exposure to water.

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request).

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request). Spectroquant® cell test kits.

Supplier: Merck

MQuant® (MQ) test strips can be considered as a mobile laboratory on a few square millimeters of plastic strip. As a screening method they provide the user with a rapid overview of the situation, which helps in making the choice of what, and perhaps if, further analysis is required, thereby leading to potentially substantial savings in time and analytical resources. The strip is a biologically-degradable polyester foil and the low reagent content, in the reaction zones, assists problem-free waste disposal.

Supplier: Merck

MQuant® (MQ) test strips can be considered as a mobile laboratory on a few square millimeters of plastic strip. As a screening method they provide the user with a rapid overview of the situation, which helps in making the choice of what, and perhaps if, further analysis is required, thereby leading to potentially substantial savings in time and analytical resources. The strip is a biologically-degradable polyester foil and the low reagent content, in the reaction zones, assists problem-free waste disposal.

Supplier: Merck

MQuant® (MQ) test strips can be considered as a mobile laboratory on a few square millimeters of plastic strip. As a screening method they provide the user with a rapid overview of the situation, which helps in making the choice of what, and perhaps if, further analysis is required, thereby leading to potentially substantial savings in time and analytical resources. The strip is a biologically-degradable polyester foil and the low reagent content, in the reaction zones, assists problem-free waste disposal.

Supplier: Lovibond

Test kit, Copper/Zinc LR tablet, Range: 0,05 - 4 mg/l

Supplier: Heyl GmbH & Co, Gebr.

Test kit, Water hardness reagent, Testomat®, 500 ml, Range: 4,48  -  44,8 mg/l CaCO₃

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Hanna

Test kit, Ammonia high range, Range: 0,0 - 50,0 mg/l

Supplier: Lovibond

Test kit, PHMB photometer tablet, Range: 2 - 60 mg/l PHMB, For unit: MD600, MD610

Supplier: Heyl GmbH & Co, Gebr.

Test kit for the determination of the water hardness in very soft or softened water samples via titration with a liquid titration agent and a pipette accurately calibrated in hardness units.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Lovibond

MD 600 photometer is for precise and accurate measurements with a small footprint.

Supplier: Heyl GmbH & Co, Gebr.

Visual colour test method using a comparator disc. Two reagents.

Supplier: Heyl GmbH & Co, Gebr.

Visual colour test method using a comparator disc.

Supplier: Lovibond

Test kit, DPD Glycine tablet (for CI separation), Range: 0,01 - 0,2 mg/l ClO₂, For unit: MD100, MD600 MultiDirect and Spectrodirect

Supplier: Heyl GmbH & Co, Gebr.

Colour comparison kit for the rapid manual analysis of the phosphate content in water in the concentration range 0 - 10 mg/l.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Lovibond

Test kit, Sulphate tablet, Range: 5 - 100 mg/l SO₄, For unit: MD600, MD610, MultiDirect and Spectrodirect

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Lovibond

Test kit, Hydrogen peroxide LR tablet, Range: 0,01 - 3 mg/l, For unit: MD600, MultiDirect and Spectrodirect

Supplier: Lovibond

Indicator for pH range 5,2 to 6,8.

Supplier: LaMotte Chemicals

ColorQ PRO 7 is a multi-parameter tester used in pool and spa for water testing. As a hand-held photometer it reads seven test factors (free chlorine, total chlorine, bromine, pH, alkalinity, calcium hardness, and cyanuric acid) directly on a digital display. These seven critical parameters helps to ensure the good quality of water.

Supplier: EUTECH

Test kit, Free chlorine (DPD) reagent kit, For unit: C401

Supplier: Lovibond

Indicator for pH range 6,0 to 7,6.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.