You searched for: Microscopy and staining reagents

Supplier: Merck

The defined hardness and uniformity of the material to be cut are vital requirements in creating consistent quality in cutting. These requirements can be met using a range of suitable substances, such as paraffins, resins, gelatine and celloidin.

Supplier: Merck

Neo-Clear® is a non hazardous alternative to xylene. It is virtually odourless, compatible with most high purity solvents and is characterised by lower evaporation rates than xylene, making it a lower health risk.

Supplier: Merck

Hard tissue like bones or teeth, and all specimens of calcified tissue like bone marrow punches require special pre-treatment before routine processing by a histological laboratory.

Supplier: Merck

Aqueous solution containing tris(hydroxymethyl)aminomethane, tris(hydroxymethyl)aminomethane hydrochloride, polyvinyl alcohol 22000, glycerol, and 1,4-diazabicyclo[2.2.2]octane.

Supplier: Merck

A support matrix or form of embedding medium for frozen sectioning. This medium freezes quickly supporting the tissue for sectioning at 3 μ and up with no cracking of the matrix at temperatures from –8 to –25 °C.

Supplier: Merck

Entellan® new is a new mounting medium for cover slippers and is specially suited for commercial automated mounting instruments that operate with cover slippers. Its viscosity ranges between 250 and 600 mPas, 1,00869 has a small viscosity range. This narrow viscosity range improves and accelerates the application, as neither the dropping rate nor the volume need to be reset after the first run with a new bottle of Entellan® new.

Supplier: Merck

Water-free mounting media, such as Neo-Mount®, should be used for permanent mounting and long-term storage of samples. Slides processed in pathologyl laboratories need to be stored up to 10 years, whereby the staining results need to be stable and fading-out is not acceptable. Neo-Mount®, anhydrous mounting medium for microscopy is an extremely colour-stable mounting medium for microscopy, which is produced with solvents based on mixtures of aliphatic hydrocarbons. It contains an aromatic-free substitute for xylene, thus, Neo-Mount® needs to be combined with Neo-Clear® exclusively. Xylene must be avoided in the mounting step, as it will cause the slides to become cloudy and streaked. In addition, by placing the dehydrated slides on filter paper for approx. 1 minute prior to mounting, any excess Neo-Clear® should be circumvented, as air bubbles might arise under the cover slip. The same pre-condition should also be met when mounting specimens using cover slip machines; in this area, Neo-Clear® can be most efficiently eliminated by incubating the slides for 1 minute in an empty slide rack.

Supplier: ZEISS

Immersion oil 518 F according ISO 8036-1/2.

Supplier: ZEISS

Increases the resolving power of a microscope. Zeiss Immersol™ is a transparent oil with a refractive index of 1.518. It is free of fluorescence and halogen, and is certified according to ISO 8036-1/2.