You searched for: Cleanroom Wipes

Supplier: Texwipe

Vertex® wipes are the cleanest, most consistent, and most rigorously quality tested cleanroom wipes.

Supplier: Texwipe

Alpha® 1 Microfibre cleanroom wipes are made from a 80% polyester/20% nylon material with a sealed edge, and are cleanroom manufactured.

Supplier: Texwipe

TechniCloth II wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe. TechniCloth II features proprietary ULP (ultra low particulate) treatment, giving it significantly lower particle generation than TechniCloth.

Supplier: Texwipe

Absorbent, single ply, 100% continuous filament polyester wipes, feature enhanced sorbency.

Supplier: Texwipe

TechniScrub™ dry wipes are made from a 50% polyester/50% cellulose non woven material with a cut edge. They are cleanroom manufactured.

Supplier: Texwipe

Revolve™ wipes, sustainable wipes made for the cleanroom industry, are made from 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

TechniCloth® wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe.

Supplier: Texwipe

SterileWipe™ AS 10 is a 2 ply, double knit construction, 100% continuous filament polyester wipe that offers high sorbency in a sealed-border wipe to prevent particle and fibre release.

Supplier: Texwipe

These FoamWipe™ wipes are made from open-cell, 100 pore-per-inch polyurethane foam.

Supplier: Texwipe

Texwipe® is a strong, double-sided twill-pattern cotton wipe woven in a cross section of 118×60 threads per square inch. The product is manufactured with long stable cotton yarn to eliminate free-floating fibres on fabric surfaces. Ideal for cleaning diffusion furnace equipment in water fabrication and other equipment in areas where high temperatures prevent the use of synthetic wipes.

Supplier: Texwipe

This wipe is constructed from a non woven blend of 55% cellulose and 45% polyester that offers both durability and absorbency. The blue tint indicates exposure to liquid which makes the wipe ideal for alerting the user to the exposure of liquids and/or dangerous spills.

Supplier: Texwipe

These 100% melt-blown PP wipes are pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionized water solution.

Supplier: Texwipe

This non woven 55% cellulose/45% polyester blend wipe is an excellent general-purpose sterile wipe in areas where economy and cleanliness are of critical importance.

Supplier: Texwipe

These pre-wetted wipes are made of a fabric blend of 55% non woven hydroentangled cellulose and 45% polyester.

Supplier: Texwipe

AlphaSorb® HC is a cleanroom laundered, 2 ply, 100% polyester wipe made from continuous-filament polyester knitted in a double-knit interlock pattern.

Supplier: Texwipe

These 2-ply double-knit 100% continuous-filament polyester wipes offer high sorbency performance.

Supplier: Texwipe

SterileWipe™ LP 10 is a 100% continuous-filament polyester wipe with thermally sealed borders that have been designed to control particle and fiber contamination. The wipe is suitable for cleaning sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: Texwipe

Sterile TexTra™ is a single-ply, double-knit, 100% continuousfilament polyester wipe that offers high-capacity sorption in a heavyweight, large surface area wipe. It is an economical alternative to two-ply polyester wipes and ideal for spill control as well as for cleaning pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, and microbiological laboratories.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

SterileWipe™ LP is a 100% continuous-filament cut edge polyester wipe that is low in particle generation and extractable levels. It provides excellent cleaning performance in critical sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: Texwipe

These highly sorbent wipes are made from 100% continuous filament polyester in a double-knit, 'no run' interlock pattern. The wipes are pre-wetted with 70% IPA and 30% deionised water.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

These lightweight, high quality wipes are constructed from 100% continuous-filament polyester.

Supplier: Texwipe

These 100% continuous filament, polyester knit fabric wipes are made in the USA from virgin stock and processed on Texwipe’s hands-free Vertex® manufacturing system. They are pre-wetted to optimal levels with 70% USP-Grade IPA/30% DIW. Ideal for cleaning delicate surfaces.

Supplier: Brand

Fleece wipes for impregnation with universal or disinfecting detergents.

Supplier: Texwipe

These premium heavy-weight all-purpose wipes are made from 100% continuous filament polyester in a double-knit, no run, interlocked pattern. Soft and non abrasive, they are ideal for critical environments where contamination control is essential.

Supplier: Texwipe

This 100% continuous filament polyester wipe with thermally sealed borders is engineered to have the lowest level of releasable particles and fibres for critical and sterile environments. The wipe is pre-wetted with 70% USP IPA.

Supplier: Texwipe

This soft 100% melt-blown PP wipe is pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionised water solution.

Supplier: Texwipe

These wipes are constructed from a 100% melt-blown PP substrate that is pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter).