You searched for: Pumps

Supplier: Sartorius

The hand operated vacuum pump made of PVC is used as practical vacuum source for outside of a laboratory.

Supplier: Spectrum Laboratories

Spectrum's KrosFlo Research I (KRI) system combines a digital peristaltic pump and a multi-purpose lab stand to provide ultimate convenience and efficiency for experiments involving fluid circulation and transfers. The easy-to-operate digital KRI pump drives the fluid stream through flexible tubing (to be order separately) while the incorporated stand and included holders secure the tubing, filters, reservoirs and other components in place.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: Thermo Scientific

Vacucenter™ is a vacuum pump cabinet fully equipped with a central power supply, a single main switch for both vacuum oven and pump including a timer for tracking oil changes for the rotary vane pump.

Supplier: HARVARD APPARATUS

The Pump 11 Elite series sets a new standard for handling the challenges of new applications. It has served the research community as the work horse infusion pump for micro and macro fluidic applications including MS calibration, reactor dosing, animal drug/nutritional studies, cell injections, electrospinning and more.

Supplier: MURRAY S

Dispensing pump is suitable for lotions, creams and gels.

Supplier: VACUUBRAND

The VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through an aspiration hand set and tubing after switching off the pump, and so supports demanding safety protocols. The BVC professional with 4 litre PP bottle that has self-closing quick couplings minimises risk in transporting hazardous waste and of contamination in the workplace. The version with coated 2 litre borosilicate glass bottle allows the user to work with aggressive disinfectants like chlorine bleach.

Supplier: VACUUBRAND

The VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level - and thus the suction force - is precisely adjustable via the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2 litre borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4 litre bottle of unbreakable polypropylene (PP) is used. The smooth surfaces allow an easy cleaning of the systems.

Supplier: EDWARDS HIGH VACUUM METTLER

These XDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including water, solvents, dilute acids and bases. It also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Comes with integrated inverter drive with auto sensing voltage input delivers optimised pumping performance. The pumps are completely field serviceable.

Supplier: VACUUBRAND

The VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemically resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimised. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4 litre PP bottle or as BVC basic G with 2 litre coated borosilicate glass bottle.

Supplier: EDWARDS HIGH VACUUM METTLER

Blade kit pump

Supplier: EDWARDS HIGH VACUUM METTLER

These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

Supplier: GILSON

Add channels to your MINIPULS® 3 or Evolution and allow even greater flexibility in your laboratory.

Supplier: asecos

Solvent pump for filling of high purity liquids, removal of organic solvents and flavourings.

Supplier: EDWARDS HIGH VACUUM METTLER

The E1M18 and E2M18 pumps are direct drive, sliding vane pumps. The E1M18 is a single-stage pump, and the E2M18 is a two-stage pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Supplier: BEHR

Models PLP 66, PLP 330 and PLP 1000. These peristaltic pumps include a pump rotor, two compression and four guide rollers.

Supplier: EDWARDS HIGH VACUUM METTLER

The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.

Supplier: BUCHI

These powerful and quietly operating three-stage V-600 PTFE diaphragm vacuum pumps are robust and highly flexible. These pumps have been operated at a flow rate of 3,1 m³/h and an ultimate vacuum of 1,5 mbar.

Supplier: BUCHI

The three-piston pump module with a pulse-free flow rate from 2,5 to 250 ml/min guarantees fast separation at a maximum working pressure of 10 bar (145 psi) or 50 bar (725 psi) for isocratic or gradient mode. These pump modules are the core components of the Sepacore® chromatography systems. The chemically resistant and biocompatible pumps can be used with a wide range of organic solvents.

Supplier: asecos

This drum pump is used for filling high purity liquids. PTFE with stop cock.

Supplier: Sartorius

The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet transfer pump is ideal for sample filtration in microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. This pump is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

Supplier: Thermo Scientific

Vacucenter™ is a vacuum pump cabinet fully equipped with a central power supply, a single main switch for both vacuum oven and pump including a timer for tracking oil changes for the rotary vane pump. The vacuum oven can be placed on top of the cabinet.

Supplier: asecos

Stainless steel drum pump with PTFE seals. Drum pump with outlet hose 1,2 m and discharge arc. for flammable liquids electrically conductive. Can be used in Zone 0 and 1. Explosion group II A.

Supplier: Lenz Laborglas GmbH & CO.KG

Water jet pumps made of borosilicate glass with or without non-return valve.

Supplier: Integra

These systems are used for aspirating, removing, or filtering biological or chemical liquids cleanly and efficiently. All functions necessary for this are built into the compact design. With single button operation, the device is ready for use at all times.

Supplier: BioTool

Vacuum aspiration system, Hand-E-vac hand controller set complete consisting of:
Hand-E-vac controller for pipettes, stand, adapter for single disposable tip, 8-channel disposable tip and 8-channel stainless steel needles

Supplier: B. Braun

The volumetric infusion pump Infusomat® Space is one of the basic building blocks of the Space system, designed for acute care adult and pediatric facilities.

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: Integra

The VACUBOY hand operator is ideal for aspirating and suctioning liquids from cuvettes, microtitration plates, test tubes, Petri dishes, cell culture bottles, roller bottles, bioreactors and other typical laboratory vessels in a safe and controlled way. It is designed to be used with many different stainless steel aspiration adapters, Pasteur and serological pipettes and pipette tips for an enormous range of applications. Each adapter has been specially designed to match the dimensions and the geometry of the corresponding glass or plastic laboratory vessels. The hand operator can be connected to any vacuum source already in the laboratory, thus serving to improve the existing facilities.

Supplier: Integra

In the laboratory small volumes of liquid need be disposed of on a daily basis. This includes the removal of excess liquids from reaction tubes, aspiration of supernatant after centrifugation steps, removal of washing solutions from microplates and much more. This is often accomplished by self-made systems consisting of a trap flask, a rudimentary aspiration tool and an external vacuum source.