Hledali jste: Termostat cirkulační s chlazením

Supplier: VWR Collection

VWR® recirkulační chladiče jsou ideální pro použití s rotačními odparkami, jelikož zajišťují trvalé, reprodukovatelné podmínky chlazení a zamezují zbytečné spotřebě vody z řadu a tím umožňují snížení finančních nákladů. Navržené jako uživatelsky příjemné zařízení. Jednotka má v horní části zařízení snadno dostupný plnicí vstup a v zadní části je pak umístěn vypouštěcí kohout. Zásobník chladicího zařízení je vyroben z nerezové oceli, funkční chladicí médium je na bázi R134 a jednotku lze použít v povoleném rozsahu okolních podmínek od 15 do 32 °C.

Supplier: JULABO GmbH

VALEGRO recirculating coolers are environmentally-friendly all-rounders for a wide range of temperature control tasks. They are characterised by a good ratio between cooling capacity and unit size as well as optimal usability. They work with natural refrigerant and can be adapted to application requirements thanks to their adjustable pump.

Supplier: JULABO GmbH

Compact refrigerated/heating circulators which can be used on benchtop or in a fume hood, ideal for temperature control of distillation apparatus or mini plant installation. All four models feature pump connections for external temperature applications and a bath opening for temperature control of small objects directly in the circulator bath. The maximum ambient temperature of +40 °C and air cooled ventilation means the units can be positioned alongside other units or directly in a fume hood.

Supplier: SI Analytics

The flow-through cooler CK 310 is the perfect complement to bath thermostats of CT 72 series to extending their temperature range to below ambient temperature.

Supplier: JULABO GmbH

The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.

Supplier: VWR Collection

Recirkulační chladící termostat je šetrný k životnímu prostředí, šetří vodu a spolehlivě zajišťuje regulaci teploty kapalin v otevřených nádobách nebo v cirkulačních systémech s uzavřeným okruhem. Jednotka poskytuje vysoký výkon chlazení při nízké ceně. Provozní teplota zařízení je −10 až +40 °C. Tuto jednotku lze použít v mnoha procesech a běžných aplikacích.

Supplier: VWR Collection

Stainless steel circulating baths with choice of Advanced Programmable or Advanced Digital temperature controller. Both are easy to navigate with large, intuitive displays and multiple communication options, including USB-A and B, RS232/485, Ethernet and external temperature probe. The reservoir drain can be accessed by removing the front panel. All models feature user-adjustable, high temperature safety cut-off points, as well as over-temperature protection. The surface is cool to the touch, even when operating at high temperatures.

Supplier: JULABO GmbH

Recirculating coolers can handle virtually any cooling requirements in laboratories or industrial environments efficiently.

Supplier: VWR Collection

Vany z nerezové oceli s uživatelsky přívětivým MX regulátorem teploty a třemi ovládacími tlačítky a výzvami na obrazovce. Vany lze použít pro vnější uzavřenou cirkulaci. Ovladač spočívá na chemicky odolné desce DuraTop™, která je chladná na dotek i při práci při vysokých teplotách, a jednotky jsou vybaveny systémem odkládání víka LidDock™. Technologie Cool Command™ reguluje požadované množství chlazení, šetří energii a zároveň poskytuje rychlé chlazení a přesné ovládání při zvýšených teplotách.

Supplier: JULABO GmbH

Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

Supplier: JULABO GmbH

Environmentally friendly recirculating coolers that save tap water, units are rapid and powerful, and offer short cool-down times and high efficiency. Due to the compact design, the coolers fit either on or under laboratory benchtops. FC units feature two separate multi-displays (LED) for actual and set point values.

Supplier: JULABO GmbH

FT immersion coolers are primarily used for counter cooling when connected to a heating circulator, or for rapidly cooling fluids down to low temperatures. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: IKA

The CBC VISC lite heating and cooling bath circulator covers a wide temperature range from −25 to +125 °C and is designed to be combined with the IKA ROTAVISC viscometers.

Supplier: JULABO GmbH

Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: JULABO GmbH

Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: QSONICA LLC

Sonication generates heat which may be detrimental to some applications. Attempting to control temperature with ice and/or repeatedly changing out water is tedious and no longer necessary. This chiller automates the sample cooling process.

Supplier: JULABO GmbH

FD flow through coolers are used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: LAUDA

Integral T are process thermostats with an integrated cooling system for dynamic temperature control within external circuits.

Supplier: LAUDA

Cooling thermostats with menu navigation in plain text for user friendly operation. Various interface modules are available as accessories. All models are available as air or water-cooled variants.

Supplier: LAUDA

The PRO cooling bath thermostats for internal bath applications are equipped with a multi-stage adjustable pump. This ensures good mixing of the bath. It has 360º turnable and detachable control panel for remote control.

Supplier: LAUDA

The PRO cooling circulation thermostats are ideal for external applications where rapid temperature changes are required. Their cooling output of 0,6 to 1,5 kW, combined with a very small filling volume enable these rapid temperature changes.

Supplier: LAUDA

Cooling thermostats with menu navigation in plain text for user friendly operation. Various interface modules are available as accessories. All models are available as air or water-cooled versions. They are similar in specifications with the ECO model thermostats, in addition these models comes with natural refrigerant.

Supplier: LAUDA

Ultracool circulation chillers provide precise temperature control in an extended operating temperature range from −10 to +35 °C and a temperature stability of ±0,5 K.

Supplier: GRANT INSTRUMENTS

Grant low temperature circulators provide a source of precision cooling for most low temperature applications.

Supplier: HUBER

These compact refrigerated circulators with insulated refrigeration baths are ideal for direct temperature control from −90 up to +200 °C. The low bath volume and high heating and cooling capacity means short heating and cooling rates, which can be increased by using the optional displacement inserts. Optional calibration inserts enable circulators to be used as calibration baths.

Supplier: Heidolph Instruments GmbH & Co.KG

With a high cooling capacity of 600 W and a heating power being almost twice as high, the Hei-CHILL Peltier thermostat is suitable for a large number of temperature control tasks.

Supplier: HUBER

Many applications depend on a reliable source of cooling. Circulating chillers in the Unichiller® range offer an ideal solution for environmentally friendly and economical cooling in laboratory and industry. There are over 50 air- and water-cooled models to choose from, with cooling powers from 0,3 to 50 kW. Efficient energy management ensures low operating costs and reduced usage of valuable fresh water. Huber circulating chillers are a resource saving solution which give a quick return on investment.

Supplier: HUBER

Unichillers® offer increased efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling.

Supplier: HUBER

Compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-CHILL 1100 Pro with a cooling capacity of up to 1100 W allows an effective and powerful cooling of every application, even at low temperatures, or the supply of multiple evaporation systems by a recirculation chiller.