You searched for: Seals

Supplier: COWIE

Mechanical Seals, Shaft guide replacement PEEK seal for 8 mm shaft

Supplier: VACUUBRAND

Indium sealing for KF connections with stainless steel/aluminum centering rings (inside/outside) for small flange.

Supplier: THERMO MATRIX TECHNOLOGIES

Matrix CapMats and CapStrips are engineered to maintain a strong seal at all times on tubes, microplates, and deepwell blocks. CapMats effectively seal down to –80 °C, while cap strips give the flexibility to seal individual caps or rows.

Supplier: Corning

Easy application and removal for short and long-term storage. Provides tight seal to minimise evaporation and condensation.

Supplier: Thermo Fisher Scientific

Sealing gaskets, For: 83B

Supplier: Thermo Fisher Scientific

EVA. For sealing PP and PS plates.

Supplier: VACUUBRAND

These spare seal rings for small flange KF connections are made of NBR or FKM.

Supplier: THERMO MATRIX TECHNOLOGIES

Strips of eight caps for sealing storage plates and racked cluster tubes. The strips are compatible with Thermo Scientific microplates, 0,8 ml storage plates, 1,2 ml round well storage plates and 1,2 ml cluster tubes ranges.

Supplier: VWR Collection

VWR®, Microplate seal, Cap strip, Single sheet/mat/strip, Cap strip for PCR plates and tube strips, flat, Non sterile

Supplier: Corning

Axygen®, Microplate seal, Heat sealing film/foil/tape (96/384 wells), Single sheet/mat/strip, Sealing film for Axygen® PlateMax™ heat sealer, permanent, ultra clear, for qPCR, PlateMax™ ultra clear permanent heat sealing film for qPCR, Non sterile

Supplier: Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: VWR Collection

These 106,7 µm thick vinyl films with 20 µm adhesive layer are designed for temporary protection of samples in 96-well plates from contamination and evaporation.

Supplier: VWR Collection

Easily pierceable 94,1 µm thick PE films with acrylic adhesive allow direct sample recovery with singe- or multi-channel pipettes and robotic probes.

Supplier: Thermo Fisher Scientific

Polyester tape with acrylic adhesive. Easy peel, easy seal general-purpose tape with a faster application time than normal tape in loose sheets.

Supplier: VWR Collection

Identical to polyester films above, but include a colour dot and white writing area on each end tab for plate identification. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place even if the centre portion of the film is removed. Alternatively, one inscribed colour-coded end tab can be removed and pasted in a laboratory notebook while the other remains on the plate.

Supplier: 3M

Safety-Walk™ Edge Sealing Compound is a liquid, solvent-based sealer that protects exposed edges of slip-resistant tapes and treads from excessive moisture or liquids.

Supplier: Corning

Axygen® ImpermaMat sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. ImpermaMats are chemically resistant, reusable sealing mats, that provide a high degree of confidence.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: Thermo Fisher Scientific

These flat cap strips provide an extremely tight seal in UTW (ultra-thin walled) PCR plates. They are an ideal choice for low volume reactions where it is important to minimize vapor loss.

Supplier: Corning

Polyester based with uniformly and consistently applied acrylic adhesive to eliminate the edge effect in ELISA assays. Suitable for sealing tissue culture plates, for short-term storage and incubation, for transport and the containment of biohazardous solutions.

Supplier: Brady

Sealing film, Polyester

Supplier: Corning

Porous film seals PP and PS culture plates, 96 and 384-well plates, and other assay plates.

Supplier: Corning

Safeguards samples during transport and storage. Ideal for sealing PCR microplates, but also suitable for other microplates.

Supplier: Thermo Fisher Scientific

Made from polypropylene (PP).

Supplier: Thermo Fisher Scientific

Clear, 24-well format Piko® PCR/qPCR film seal allows high transmission of fluorescence across the range of commonly used fluorophores. When used with a Piko® thermal cycler or PikoReal® Real-Time PCR system, sample volumes as low as 5 µl can be used with minimal evaporative loss.

Supplier: Corning

For sealing 96 and 384-well PCR plates.

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: Brand

Seal-R-film™ sealing film seals beakers, flasks, and other vessels.

Supplier: Thermo Fisher Scientific

Polyester film with acrylic adhesive. Provides an effective seal for all MicroWell™ plates used in PCR and cell culture.