Supplier: Whatman products (Cytiva)

A polyester backed and highly consistent membrane for use with low viscosity samples in a lateral flow assay.

Supplier: Sartorius

PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide.

Supplier: Sartorius

These are general purpose membrane that provide excellent performance with most solutions when retentate recovery is of primary importance.

Supplier: Sartorius

Membrane filters manufactured from high grade PC film using track etch technology. Applicable for particulate analysis, epifluorescence miroscopy, fluid clarification, cytology, cell biology, bioassays, water microbiology, environmental analysis.

Supplier: ENTEGRIS

These filter disc series with non-woven PP media can be used for simple, quick and efficient filtration of fluids used in laboratory, pilot and small scale applications. Can be used for clarification of acids, bases and solvents.

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.

Supplier: Spectrum Laboratories

Pre-cut membrane discs are used with Spectra/Por® MacroDialyzers and Equilibrium Dialyzers.

Supplier: Bohlender

Membrane filters made of microporous PTFE, with 0,2 mm thickness.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Sartorius

Gelatine membrane filters in conjunction with the MD8 air samplers (gelatine filter method) are used for the collection of airborne microbes and viruses. These filters are completely water-soluble, therefore, microbes in one sample can be cultivated in different nutrient media or low and high bacteria counts can be measured.

Supplier: Cytiva (Formerly Pall Lab)

The next generation of universal hydrophilic PTFE membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents.

Supplier: Sartorius

These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.

Supplier: Sartorius

Hydrophilic polyamide (nylon) membrane filters. For the filtration of alkaline solutions and organic solvents.

Supplier: Sartorius

These membrane filters have high hydrophilicity and exceptionally low non-specific binding characteristics. These membranes are ideal for sample cleaning and protein removal and when high recovery of the filtrate solution is of primary importance.

Supplier: LIOFILCHEM

Mixed cellulose ester membrane for the isolation and enumeration of bacteria by membrane filter technique.

Supplier: Cytiva (Formerly Pall Lab)

Naturally hydrophilic highly versatile laboratory membrane filter.

Supplier: Cytiva (Formerly Pall Lab)

Hydrophilic acrylic polymer Versapor® membrane on non woven support ideal for pre-filtration of difficult to filter solutions and serum.

Supplier: Sartorius

Hydrophobic cellulose nitrate and cellulose acetate gridded membrane filters for colony count and sterility testing, with outstanding retention rates for microorganisms.

Supplier: Cytiva (Formerly Pall Lab)

These membranes have been designed specifically for use with the Sentino® automatic filter dispenser.

Supplier: ENTEGRIS

These filter disc series can be used for simple, quick and efficient filtration of fluids used in laboratory, pilot and small scale applications.

Supplier: Sartorius

Cellulose nitrate hydrophilic membrane filters. For sample pretreatment, particle testing and chemotaxis.

Supplier: Cytiva (Formerly Pall Lab)

Hydrophilic PES Supor® membrane for reduced filtration time, optimised for biological, pharmaceutical and sterilising filtration requirements.

Supplier: Sartorius

These membranes are highly hydrophilic and are often preferred for their high protein recovery when processing very dilute solutions.

Supplier: Sartorius

Cellulose acetate hydrophilic membrane filters. Ideal for biological and clinical analysis, sterility tests and scintillation measurements. Very low protein binding capacity, suitable for aqueous, alcoholic media and hot gases.

Supplier: Cytiva (Formerly Pall Lab)

Inherently low ash membrane ideally suited for multiple NIOSH analytical methods.

Supplier: Sartorius

Regenerated cellulose hydrophilic membrane filters. For filtration of organic solvents. Suitable for particle removal from aqueous solutions and solvents. Low adsorption.

Supplier: Cytiva (Formerly Pall Lab)

Contrasting hydrophilic modified black PES membrane for microbiological analysis.

Supplier: Sartorius

Membrane filter, Membrane: Cellulose acetate, Non sterile, Type: 123, Pore size: 1,20 µm, Ø: 25 mm, Thickness: 140 µm