Supplier: ROBU GLASFILTER

ROBU® VitraPOR® solvent filter for HPLC provides precise and reliable filtration of solvents, ensuring optimal performance in high-performance liquid chromatography systems.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are particularly useful for liquid clarification and liquid scintillation counting.

Supplier: Cytiva (Formerly Pall Lab)

Inherently low ash membrane ideally suited for multiple NIOSH analytical methods.

Supplier: Sartorius

Membrane adsorber units with ion exchange membranes (stabilised reinforced cellulose) are ideal for capturing of large proteins and viruses as no size exclusion effects can be observed.

Supplier: Cytiva (Formerly Pall Lab)

Supracap™ 100 depth filter capsules with PP housing are scalable capsules with Seitz® high performance depth filter media. They are suitable for process development and pilot scale applications.

Supplier: G-Biosciences

These disposable spin columns are designed for protein purification. These spin columns are uniquely designed, with a snap off end converting to a closure for the column for easy manipulation and use.

Supplier: Cytiva (Formerly Pall Lab)

The Pall Nanosep device for nucleic acid binding (NAB) incorporates a dual layer silica-based quartz glass fiber media to allow for efficient binding of DNA and RNA, while providing smooth flow and rapid processing of samples.

Supplier: MOTIC

Panthera, Didymium filter (Ø 45 mm)

Supplier: Cytiva (Formerly Pall Lab)

Hydrophilic PES Supor® membrane for reduced filtration time, optimised for biological, pharmaceutical and sterilising filtration requirements.

Supplier: Cytiva (Formerly Pall Lab)

Optimised to provide the most consistent results when analysing ionic species. Certified for low level extractables detected by conductivity.

Supplier: Whatman products (Cytiva)

Easily fits into conical funnels.

Supplier: Whatman products (Cytiva)

Comparable to Grade 0858 but with a smooth surface, slightly thinner and faster.

Supplier: MOTIC

Ground glass filter (Ø = 45 mm)

Supplier: Cytiva (Formerly Pall Lab)

Certified hydrophilic mixed cellulose esters membrane for microbiological analysis meets or surpasses regulatory specifications.

Supplier: Whatman products (Cytiva)

Whatman Grade GF 92 glass microfiber filters from Cytiva are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.

Supplier: Lovibond Tintometer

Lovibond®, Filter set red, yellow, neutral, with 10 filters

Supplier: Cytiva (Formerly Pall Lab)

Scalable capsules with PP housing and vent and Seitz® high performance depth filter media. Supracap™ 50 capsules are designed for developing and optimising a process during scale-up and scale-down studies. They can be used to quickly and accurately determine which series and grade of depth filter media will provide the best performance as well as the necessary filtration area required to meet process volume.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman Grade 44 quantitative paper is a thin version of Grade 42 ashless paper. The thinness reduces the overall ash content, making Grade 44 well suited for analyses relying on ash-free dry weight.

Supplier: Whatman products (Cytiva)

Whatman™ QM-H is a pure quartz fibre filter for use in testing acidic gases, stacks, flues and aerosols. It has low heavy metal content so it is well suited for heavy metals analysis.

Supplier: ENTEGRIS

Superior retention performance for ultra-clean, point-of-use filtration of photoresist and photochemical solvents.

Supplier: Lenz Laborglas GmbH & CO.KG

These cylindrical filter plugs without tube are made of borosilicate glass 3,3.

Supplier: Whatman products (Cytiva)

A creped paper for coarse particles, offers a very high filtration speed.

Supplier: Whatman products (Cytiva)

These 934-AH™ RTU grade filter papers have been pre-washed, dried (or ignited), cooled, desiccated and weighed, which eliminates the pre-treating steps that are otherwise required by the US EPA Laboratory Standard Method 2540 parts C, D, and E. These filter papers are widely used for dissolved, suspended and volatiles solid analysis. They are also used as a wastewater filter for a wide range of water monitoring applications including the monitoring of rivers, lakes and coastal waters, as well as analysing purified discharge of wastewater treatment plants and monitoring discharge water from industrial plants.

Supplier: Whatman products (Cytiva)

These EPM 2000 air filters are used in high volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal interference.

Supplier: Biotium

Ultrafiltration can be used to rapidly and easily remove small molecules such as Tris, glycerol and glycine from antibody solutions, or to concentrate antibodies prior to conjugation. They also can be used to remove free dye or free biotin from antibodies after conjugation.

Supplier: SHANDON

Highly absorbent disposable filter cards for use with TPX chamber.

Supplier: Cytiva (Formerly Pall Lab)

Useful for prefiltration of particulate laden aqueous samples, serum filtration and dissolution testing.

Supplier: Cytiva (Formerly Pall Lab)

Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables.

Supplier: Whatman products (Cytiva)

A thick paper with high wet strength offering a very high flow rate.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are suitable for water quality parameter measurement and air filtration applications. They can be used for high efficiency, general purpose laboratory filtration, including water pollution monitoring of effluents, for filtration of water, foodstuff analyses, protein filtration, and radioimmunoassay of weak β emitters.