Supplier: Whatman products (Cytiva)

A thick paper with high wet strength offering a very high flow rate.

Supplier: G-Biosciences

These C18 spin columns are ready-to-use micro centrifuge columns for peptide clean up and concentration. The columns consist of porous C18 reverse-phase resin that has a particle size of ~15 µm and a pore size of 300 Å. The resin offers highly efficient binding and recovery of peptides and is ideal for mass spectrometry and other peptide related applications.

Supplier: Cytiva (Formerly Pall Lab)

Versapor® acrylic copolymer membrane, PC housing. For prefiltration of particulate liquids (such as serum) prior to final sterilisation filtration and for non critical final filtration.

Supplier: Whatman products (Cytiva)

Whatman Grade GF 92 glass microfiber filters from Cytiva are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.

Supplier: Thermo Fisher Scientific

This in-line filter removes contamination from gas with easy-to-use filters. Reuseable end-fittings containing needle valves remain installed during filter changes, preventing contamination and reducing the cost of clean gas.

Supplier: Cytiva (Formerly Pall Lab)

Supor® hydrophilic polyethersulfone (PES) membrane, acrylic housing: 0,2 µm vent. Positive pressure filtration of aqueous laboratory solutions. For sterilisation or clarification of up to three litres of serum-free cell and tissue culture media, media additives and other aqueous solutions. Ideal for sterilisation of solutions that tend to foam when filtered under vacuum.

Supplier: MOTIC

Blue filter for FBGG/2111 stand (Ø = 42 mm)

Supplier: DWK Life Sciences

Filtering flask, 2000 ml, NS 45/40

Supplier: Merck

Filter cartridge, Type: SimpliPak® 1 cartridge (for RiOs™, Elix® or still water feed)

Supplier: Thermo Fisher Scientific

These filters can be easily replaced without tools.

Supplier: Lenz Laborglas GmbH & CO.KG

Glass filter discs centred with unfused rim.

Supplier: Cytiva (Formerly Pall Lab)

GWV High capacity capsules are designed for the preparation of groundwater samples for dissolved metals analysis. 42 Metals Analysis Certification is printed on each package.

Supplier: Whatman products (Cytiva)

Grade 181 support filter for seed tests using copenhagen tank system.

Supplier: Cytiva (Formerly Pall Lab)

These centrifugal devices can quickly concentrate up to 20 ml of biological sample without valuable sample loss.

Supplier: Cytiva (Formerly Pall Lab)

These centrifugal devices provide a precise, quick recovery of microlitre volumes of concentrate.

Supplier: Socorex Isba

In-line filter, Pk: 50

Supplier: Thermo Fisher Scientific

Pierce™ cellulose acetate filter spin cups are convenient tools for manipulating small volumes of affinity supports (20 - 400 µl) for protein purification. Simply add the affinity resin and sample to one of the spin cups, then use a microcentrifuge to efficiently wash away contaminants and elute the purified sample without losing any resin in the process. Spin cups allow more protein to be affinity purified in less time.

Supplier: Spectrum Laboratories

Pre-cut membrane discs are used with Spectra/Por® MacroDialyzers and Equilibrium Dialyzers.

Supplier: Whatman products (Cytiva)

Owing to their extremely high purity our seed testing papers provide reliable and reproducible results. The papers are made from pure cellulose without any additives and do not contain any substances that could influence the growth of the seeds. The constant water absorption of the papers ensures the continuous provision of the required amount of water.

Supplier: Cytiva (Formerly Pall Lab)

These centrifugal devices are suitable for rapid sample prepration in many applications.

Supplier: Cytiva (Formerly Pall Lab)

Compact and disposable filtration units for analysis of process fluids.

Supplier: Whatman products (Cytiva)

Grained, with medium fast flow rate and medium retention. A universal filter paper, used for the filtration of extracts, oils, beer, syrups etc.; also applied in filter presses or for the aspiration of liquids.

Supplier: Cytiva (Formerly Pall Lab)

These devices are used for simple, reliable concentrating and desalting of 50 to 500 μl samples. Select the low protein binding Omega™ membrane for ultrafiltration applications. The Bio-Inert® membrane is ideal for microfiltration of biological solutions. The GHP membrane is ideal for sample preparation in analytical chemistry (HPLC, GC, IC and MS). It is suitable for aqueous, organic and aggressive organic samples, and for rapid processing of samples.

Supplier: Cytiva (Formerly Pall Lab)

These disposable capsules offer easy microfiltration for laboratories and small-volume processors.The pleated capsules combine the efficiency of a membrane disc filter with the large filtration capacity of a pleated surface.

Supplier: Sartorius

Vivaclear centrifugal filters are disposable microfiltration devices for the fast and reliable clarification/filtration of biological samples in the range 100 to 500 µl. They can be used in fixed angle rotors suitable for 2,2 ml centrifuge tubes.

Supplier: Cytiva (Formerly Pall Lab)

Convenient and reliable concentration, purification and diafiltration of 15 to 60 ml biological samples. Concentrate 60 ml sample volumes to 4 ml in 30 minutes.

Supplier: Thermo Fisher Scientific

Hydrophilic PES membrane, PS graduated housing. Ideal for biological and pharmaceutical sterilisation requirements. Universal tissue culture membrane with lowest protein binding and extractables. Rapid-Flow™ filters with 0,2 µm PES membranes are STEM CELL TESTED.

Supplier: VWR Collection

These units are ideal for minimising unnecessary transfers by filtering directly into the centrifuge tube.

Supplier: Bohlender

Vacuum filters with multi-stage hose connector with integrated lock screw for connecting vacuum tubing with Int.Ø 6 mm or 8 mm. The filters are produced without plasticisers and have an almost universal chemical resistance.

Supplier: IDEX RHEODYNE

Inlet filters are used to extract particles from the sample between the injector and the column.