You searched for: Chromatography Supplies

Supplier: Agilent

Agilent burner components for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

The Agilent sampling probe is equivalent to the PerkinElmer AA version, and is robust in daily use.

Supplier: Agilent

A variety of high quality pump kits for LC systems and applications, containing all fittings and connections required.

Supplier: Agilent

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-MS.

Supplier: Agilent

These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Supplier: Agilent

Split trap vent replacement kit (2 filters and 4 O-rings)

Supplier: Agilent

The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Supplier: Agilent

The electron multiplier converts incident ions into an amplified electric current used to record measurements of the ion signal in ICP-MS Systems.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-OES.

Supplier: Merck

FocusLiner™ inlet liners are designed with wool plug to promote the rapid vaporisation of the entire sample, minimise mass discrimination, and prevent non-volatile material from entering the column. It incorporates a unique design to prevent the shifting of the wool plug during repeated injections or sudden inlet pressure changes. These liners are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Agilent

These sample loops are fully compatible with your PerkinElmer FIMS/FIAS systems, so can be confident that they will integrate seamlessly with PerkinElmer AA system.

Supplier: Agilent

The key features of power amplifier tubes for PerkinElmer ICP-MS systems.

Supplier: Agilent

CrossLab, Direct liners, straight-through, for 1177 split/splitless injector ports, 90 µl, Ø ext.: 6,3 mm, Ø int.: 1,2 mm, Length: 78,5 mm

Supplier: METROHM

Spare filters for RP 2 Guard/3.5 column

Supplier: Agilent

These torch injectors for PerkinElmer ICP-MS are available in a wide range of types.

Supplier: Agilent

These hyperskimmer cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

MP-AES Torches for the 4100/4200 Microwave Plasma-Atomic Emission Spectrometer.

Supplier: Agilent

Oil mist filter element, for E1M18/E2M28, For: LC/MS

Supplier: VARIAN

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: VARIAN

Load and Lock 4003 column, spare parts kit

Supplier: VARIAN

SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.

Supplier: VARIAN

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products. RheBuild® kits eliminate the need to order individual parts.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These ion lenses are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

Filters for PerkinElmer ICP-OES systems.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-MS coils for complete confidence.

Supplier: Agilent

Features and specifications for the Intuvo Guard Chips.