Monitoring Systems

Supplier: VWR Collection

A simple, quick test for hygiene control of work surfaces. Application fields: Food industry, catering, dairy industry, health authorities and HACCP consultants. A colorimetric scale to interpret the results is printed on each tube. The comparison between the solution colour and the colorimetric scale confirms if the surface is clean or dirty. It’s enough to streak the wet swab on a surface, and to insert it into the tube. Break the glass vial contained in the tube by using the clamp. At the end of the test the tube can be disposed of as normal waste. Room temperature storage.

Supplier: Avantor Fluid Handling

Program your process meter on-site.

Supplier: LIOFILCHEM

For microbial monitoring of pathogens on surfaces.

Supplier: Avantor Fluid Handling

Four sensors operate as through-glass buttons for easy on-site programming without removing the cover and exposing the electronics.

Supplier: EBRO

EBI 40 loggers are designed for mapping applications at high temperatures. In combination with thermal insulation box (620-1804), they can be used for 2 hours at 250 °C. At higher temperatures, the logger can be placed remotely and temperature characteristics viewed on the display.

Supplier: ERLAB CAPTAIRE

Halo Sense has been designed to continuously monitor the lab air quality for a large spectrum of fumes and vapours. Halo Sense comes in 3 versions: Volatile Organic Compounds (VOC), acid and formaldehyde.
Please complete the quote request to enable us to assist you in finding the right unit for your application.

Supplier: 3M Food Safety

3M™ Molecular Detection Heat Block Insert.

Supplier: LIOFILCHEM

The ESC (Easy Surface Checking) swab range includes a new generation of sampling devices for microbiological examination of surfaces, especially recommended for food and pharmaceutical industries.

Supplier: Testo

Instrument for long-term measurement and parallel determination of CO₂ concentration, humidity, air temperature and degree of turbulence in workplaces.

Supplier: HYSERVE

Luminometer for hygiene validation of surfaces in 10 seconds.

Supplier: 3M Food Safety

Designed to provide assurance that your 3M hygiene monitoring reagents and instruments are being stored and used correctly.

Supplier: Avantor Fluid Handling

Optimize performance of your GF+ Signet Transmitter/Controller.

Supplier: Rmoni

Rmoni offers complete end-2-end sensor solutions to set up an Environmental Monitoring Solutions (EMS) in hospitals, laboratories, pharmacies and cleanrooms. Keeping track of all critical parameters including temperature, humidity and many more. Ensuring product and process integrity during storage, handling and as well as transportation.

Supplier: Thermo Fisher Scientific

InstrumentConnect 24/7 remote monitoring system comprises connect edge gateways and adapters. Connect edge gateways can send data to the InstrumentConnect cloud or customer on-premise systems via OPC UA ™. Available in Wi-Fi/Ethernet or Ethernet-Only models.

Supplier: 3M Food Safety

3M™ Clean-Trace™ Luminometer is a simple, quick and reliable hand held diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis.

Supplier: 3M Food Safety

The Clean-Trace™ luminometer is a simple, quick and reliable handheld diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis. This Hygiene Monitoring and Management System offers food safety professionals a complete system of products consisting of a luminometer handheld device, compatible tests and a powerful new software platform, to verify that surfaces have been effectively cleaned in seconds, for better decision making and audit preparedness.