Multi-Element Standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Multi-Element QC-19 Check Standard Solution, Specpure®, Application: ICP standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Multi-Element ICH Q3D & USP 232 Kit for Metals Analysis, Specpure®, Application: Pharmaceutical standards

Supplier: Thermo Fisher Scientific

7 components in 15% HCl matrix.

Supplier: Thermo Fisher Scientific

Cd, Co, Cr, Cu, Fe, Mn, Ni, V, Zn @ 100 µg/ml

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Semiquantitative Standard 2, Specpure®, Application: ICP standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Stock Standard Solution A for 200.8, Rev. 4.4, Specpure®, Matrix: 5% HNO₃/tr. (CHOH)₂(COOH)₂, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Interference check standard AB(ICS-AB) solution, Specpure®, Matrix: 5% HNO₃/tr. (CHOH)₂(COOH)₂, Application: ICP standards

Supplier: Thermo Fisher Scientific

This LabPak™ comes with all the necessary standard concentrates needed for the day to day operations to complete the EPA established CLP Protocol requirements. Minimal mixing and dilution of the standard concentrates make it easy by saving you time and money in preparing all the necessary CLP Protocol Standards.

Supplier: Thermo Fisher Scientific

Multi-Element Standard, 8 component standard, 100 µg/ml, Specpure®, Matrix: 5% HNO₃, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Multi-Element QC-7 Check Standard Solution, Specpure®, Matrix: 5% HNO₃/tr HF, Application: ICP standards

Supplier: Thermo Fisher Scientific

These standards are applicable for the determination of elements as dissolved elements in ground waters, surface waters, and drinking water, and total recoverable elements in these waters as well as wastewaters, sludges, and soils samples.

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Multi-Element Plasma Standard Solution 2, Specpure®, Matrix: Nitric acid dil., Application: ICP standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Stock Standard solution B, Specpure®, Matrix: 1% HNO₃, Application: ICP-MS standards

Supplier: USP

USP Reference Standards are specified for use in conducting official USP–NF tests and assays. USP also provides Reference Standards specified in the Food Chemicals Codex as well as authentic substances—high-quality chemical samples—as a service to analytical, clinical, pharmaceutical and research laboratories. To confirm accuracy and reproducibility, USP Reference Standards are rigorously tested and evaluated by multiple independent laboratories including USP, commercial, regulatory, and academic labs. USP also provide publicly available, official documentary standards for pharmaceutical ingredients in the USP–NF that link directly with our primary reference standards.

Supplier: VWR Chemicals

Multi-Element Standard, ICP multi-element standard solution, 21 elements, 100 mg/L each of: Al; As; B; Ca; Cd; Cr; Co; Cu; Fe; K; Mg; Mn; Mo; Na; Ni; Pb; P; Si; S; Ti; Zn, VWR® ARISTAR®, Matrix: 5% HNO₃, Application: ICP standards

Supplier: VWR Chemicals

22 elements 100 mg/L: As, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Li, Mg, Mn, Mo, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn.