You searched for: Petroleum Industry Standards

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.

Sort By

« ‹ 3 4 5 › »

ASTM® D5441 MTBE contaminants (low) mix B, analytical standard, Supelco®

Supplier: Merck

ASTM(R) D5441 MTBE Contaminants (low) Mix B, Supelco®, 0.1 % (w/w) each component in methyl tert-butyl ether

Expand 1 Items

ASTM® D5307 crude oil internal standard, certified reference material, Supelco®

Supplier: Merck

ASTM® D5307 crude oil internal standard has been used in the quantitative determination of diamondoid compounds like adamantane in specific organic solvents like dichloromethane, hexane, carbon-tetrachloride, hexane , heptadecane, hexadecane, pentadecane and tetradecane, using infrared attenuated total reflection spectroscopy (IR-ATR).

Expand 1 Items

ASTM® D2887 reference gas oil, analytical standard, Supelco®

Supplier: Merck

ASTM(R) D2887 Reference Gas Oil, Supelco®, Pk Info: pkg of 6 x 1 mL

Expand 1 Items

Corning Life Sciences

Why Choose Corning Fetal Bovine Serum?

Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.

Buy Now

Smoke point standard ASTM D 1322 / IP 57Supelco®

Supplier: Merck

Smoke point standard, Supelco®, 24.25 mm, ASTM D 1322; IP 57

Expand 1 Items

NWTPH-HCID surrogate standard, certified reference material, Supelco®

Supplier: Merck

NWTPH-HCID surrogate standard, Supelco®, 5000 µg/ml in methylene chloride

Expand 1 Items

ASTM® D5442 quantitative linearity standard, C12 - C50, analytical standard, Supelco®

Supplier: Merck

ASTM(R) D5442 Quantitative Linearity Standard, C12 - C50, Supelco®, 0.01 % (w/w) each component in cyclohexane

Expand 1 Items

ASTM® D4815 valve timing mix, analytical standard, Supelco®

Supplier: Merck

ASTM(R) D4815 Valve Timing Mix, Supelco®, (each component at the nominal wt% indicated)

Expand 1 Items

ASTM® D5442 C12-C60 qualitative retention time mix, analytical standard, Supelco®

Supplier: Merck

ASTM(R) D5442 C12-C60 Qualitative Retention Time Mix, Supelco®, 6.25 % (w/w) each component

Expand 1 Items

Calcinated petroleum coke - trace elements

Supplier: LGC Standards PROMOCHEM

This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.

Expand 1 Items

Total Acid Number (TAN) Standards

Supplier: CUSTOM MADE CHEMICALS LAB

Total acid number TAN 17034, 2 mg KOH/g

Expand 4 Items

Petroleum standards, heavy mineral oils, CRM

Supplier: LGC Standards PROMOCHEM

This matrix material solution is intended for use as a diluent for other metallo-organic standards.

Expand 2 Items

Gasoline fuel dilution standards, VHG

Supplier: LGC Standards PROMOCHEM

This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.

Expand 1 Items

Elemental analysis standards, soot content standards, VHG

Supplier: LGC Standards PROMOCHEM

This reference or calibration standard is intended for use in the determination of soot in diesel motor oil by infrared spectroscopy and other technique.

Expand 6 Items

Oil analysis standards, phosphorus in 20 blank oil, CONOSTAN®

Supplier: LGC Standards PROMOCHEM

Phosphorus in 20 blank oil, 1000 µg/g

Expand 1 Items

Fuel oil - trace elements, NIST-1634C reference material

Supplier: LGC Standards PROMOCHEM

NIST-1634C standard, fuel oil- trace elements

Expand 1 Items

Cloud Point Standard, ASTM D2500 and ISO 3015 (Diesel) (PPCPD)

Supplier: CUSTOM MADE CHEMICALS LAB

Cloud point standard, Flash point: 62,5 °C, ASTM D2500, ISO3015

Expand 1 Items

Residual fuel oil - sulphur, NIST-1622E reference material

Supplier: LGC Standards PROMOCHEM

This reference standards are intended for use in the calibration of instruments and the evaluation of methods used in the determination of total sulphur in fuel oils and materials of similar matrix.

Expand 1 Items

Biodiesel blank, VHG

Supplier: LGC Standards PROMOCHEM

This solution for using as calibration blank for biodiesel metals and sulphur analysis.

Expand 2 Items

Reference materials, base number standards, in hydrocarbon oil

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in the determination of base number (AN) in petroleum products in accordance with ASTM D2896/IP 276 (by potentiometric perchloric acid titration) or ASTM D4739 (by potentiometric titration).

Expand 13 Items

Reference materials, acid number standards, total acid number (TAN)

Supplier: LGC Standards PROMOCHEM

Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).

Expand 2 Items

Coal fly ash - constituents

Supplier: LGC Standards PROMOCHEM

These reference standard is intended for use in the evaluation of analytical methods used for the classification of coal fly ash and for the determination of constituent elements in coal fly ash or materials of a similar matrix.

Expand 3 Items

Elemental analysis standards for particle count analysis, VHG

Supplier: LGC Standards PROMOCHEM

PTP sample for particle count analysis, VHG, 125 ml, VHG

Expand 1 Items

Reference standards, nitrogen standard set, CRM, VHG

Supplier: LGC Standards PROMOCHEM

These calibration standards are intended for use in the determination of low level nitrogen by ASTM Method D4629.

Expand 1 Items

Elemental analysis standards, PTP sample of oils, VHG

Supplier: LGC Standards PROMOCHEM

The PTP has been specially designed for analytical laboratories that analyse new and used oils for metals, sulphur, viscosity and particle count.

Expand 1 Items

Reference materials, metals in biodiesel Standard, VHG

Supplier: LGC Standards PROMOCHEM

This solution is intended for use as a calibration or reference standard for the analysis of these analytes in biodiesel or related organic matrices according to ASTM D6751. Sulfur is present in the raw materials and is not certified.

Expand 1 Items

Reference materials, diesel fuel dilution Standards, VHG

Supplier: LGC Standards PROMOCHEM

These standards are intended for use in the determination of fuel (diesel fuel or gasoline) in used engine oils by GC, IR, fuel dilution meter (fuel sniffer), or flash point analyser. They are prepared gravimetrically from well-characterised fuels and hydrocarbon oils, and are verified by GC-FID in accordance with ASTM Method D3524 or D3525.

Expand 2 Items

Reference standard, water saturated octanol, NIST

Supplier: LGC Standards PROMOCHEM

NIST-2890, water saturated octanol, NIST

Expand 1 Items

Elemental analysis standards, custom blend S-21+K, CONOSTAN

Supplier: LGC Standards PROMOCHEM

Custom blend S-21+K, CONOSTAN®, 885 ppm

Expand 1 Items

Reference materials, cloud point reference, VHG

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.

Expand 1 Items

Reference materials, acid number standards, in hydrocarbon oil, VHG

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).