You searched for: Petroleum Industry Standards

Supplier: REAGECON

Gasoline calibration standard (three compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. This product is prepared gravimetrically on a weight/volume basis to a specification of ±2.5%

Supplier: Merck

Intermediate Polar Column Test Mix, TraceCERT®, Supelco®, 500 mug/mL in dichloromethane, Certified reference material, Pk Info: ampule of 2 mL

Supplier: Merck

Petroleum Refinery Pyrolized Gas (PY GAS), Supelco®

Supplier: Merck

Cetane Number standard, 52,6, Supelco®, ASTM D 613

Supplier: Merck

Acidity standard, Supelco®, (0.0083 mg KOH/g), ASTM D 3242

Supplier: Merck

Flash point standard, Abel, Supelco®, Flash point: 41,2 °C, IP 170

Supplier: Merck

EPH matrix spike, Supelco®, 50 µg/ml in acetone

Supplier: Merck

n-Paraffin Mix C10, C12, C14, C16, Supelco®, (varied conc.)

Supplier: Merck

n-Paraffin Mix C18, C20, C22, C24, Supelco®, 2 % (w/w) each component in octane

Supplier: Merck

Fuels Testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption ASTM D1319.

Supplier: Merck

Procedure A is applicable to distillate fuels - diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils. These UKAS certified standards are specifically designed to be used for regular instrument performance checks.

Supplier: Merck

WIP VOA standard, Supelco®

Supplier: Merck

Aniline point standard, Supelco®, ASTM D 611

Supplier: Merck

Trace elements in fuel oil, Flash point: 61 °C

Supplier: Merck

Pour point standard, Supelco®, IP15, ASTM D97, ISO 3016, BS 2000, Pt 15

Supplier: Merck

Distillation Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Distillation ASTM D86 and ISO 3405.

Supplier: Merck

These UKAS certified standards are specifically designed to be used for regular instrument performance checks.

Supplier: Merck

ASTM(R) D3710 Qualitative Calibration Mix, Supelco®

Supplier: Merck

n-Paraffin Mix C5, C6, C7, C8, Supelco®, (varied conc.)

Supplier: Merck

ASTM(R) D5442 Quantitative Linearity Standard, C16 - C44, Supelco®, 0.01 % (w/w) each component in cyclohexane

Supplier: Merck

ASTM(R) 5442 (C12-C60) Quantitative Linearity Standard, Supelco®, 0.01 % (w/w) each component in cyclohexane

Supplier: Merck

ASTM(R) D2887/D5307 Column Resolution Test Mix, Supelco®, 1 % (w/v) each component in octane

Supplier: Merck

Oil and grease, Supelco®

Supplier: Merck

ASTM(R) D2887 Calibration Mix, Supelco®, (varied)

Supplier: EHRENSTORFER

Regular diesel fuel, 2500 µg/ml in methanol, Reference standard

Supplier: Merck

n-Paraffin Mix C24, C28, C32, C36, Supelco®, 2 % (w/w) each component in octane

Supplier: Merck

Tetratetracontane ≥98.0% (GC), Supelco®

Supplier: Merck

Zeolite, Linde type A, BCR®

Supplier: Merck

No. 2 Fuel Oil, refinery grade, Supelco®, 20000 mug/mL in methanol

Supplier: Merck

Alkane standard mixture for performance tests of GC-systems, C10 - C40 (all even), Supelco®, 50 mg/l each