You searched for: Filter Cartridges

Supplier: ENTEGRIS

These filters are designed for small to mid volume POU photochemical and solvent filtration needs. They can be used for the hydrophobic filtration of photoresists, thinners and solvents.

Supplier: ENTEGRIS

These point-of-use filters meet small to mid-volume photochemical filtration needs for positive developer and DI water applications. Both Optimizer® DEV filters (for developer applications) and Optimizer® DI filters (for DI water applications) require no pre-wetting, so the filters function immediately after installation. The design also limits the handling of hazardous chemicals during the installation and promotes a healthier workplace. Do not use either filter with aromatic hydrocarbons.

Supplier: Sartorius

Filter cartridge, Type: Analytical kit, arium® pro cartridge set for biological, chemical-analytical

Supplier: Sartorius

Filter cartridge, arium®, Ion exchange resin mix, refill pack for complete deionisation cartridges, arium® 615DI, in 25 l PE bag

Supplier: Sartorius

Arium® mini scientific pack deionisation cartridge faetures top-down-flow technology which is optimised for the removal of both organic and inorganic constituents. The set was designed specifically to match the unit and delivers ultrapure water that exceeds the ASTM Type 1 quality standard.

Supplier: Sartorius

Filter cartridge, arium®, Deionisation cartridge with installation kit, capacity range up to 1400 l @ 20 ºdH, flow rate 600 l/h

Supplier: Sartorius

This is the deionization cartridge set with top-down technology which is optimized for the removal of both organic and inorganic constituents. It is specifically designed to match the unit and delivers ultrapure water which exceeds the ASTM Type 1 quality standard.

Supplier: MACHEREY-NAGEL

These filtration cartridges are used for sample clarification under vacuum (e.g., using the CHROMABOND® vacuum manifold or SPE automation systems) or by gravity. By using CHROMAFIL® filtration cartridges with their specific membranes unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation.

Supplier: Sartorius

Sartoclean® filter cartridges are cellulose acetate (CA) membrane based prefilters. These filters are optimised for the protection of downstream equipment and Sartobran® CA final filters.

Supplier: Sartorius

Sartovent® is an ideal filter for sterile aeration of tanks. It is entirely made of PP and does not alter the organoleptic properties of the product.

Supplier: Sartorius

Sartolon® filter cartridges are designed for broad chemical compatibility for specific applications in the pharmaceutical and chemical industry. The double-layer design leads to superior filtration performance compared to other nylon membrane filters. Ideal for filtration of a broad range of solvents and solvent-containing liquids.

Supplier: Sartorius

Filter cartridge, Sartobran®, PP, Membrane material: CA, Type: 2-flange bayonet adapter with 226 double O-ring, Pore size: 0,2 µm, Filtration area: 18000 cm²

Supplier: Sartorius

Sartofluor® GA filter cartridges, manufactured with permanently hydrophobic PTFE membranes, are specially designed for sterile venting and gas applications. Due to their permanent hydrophobicity, they offer the highest process security, even with high volume gas streams, extreme humidity and stringent in-line steam sterilisations.

Supplier: Sartorius

These filters are designed for biopharmaceutical industry from particle removal to bioburden reduction. They offer a defined retention performance by size exclusion.

Supplier: Sartorius

Sartoguard® GF filter elements consist of glass fiber layers and PES membranes. They combine the defined retention performance for particles and microorganisms of membrane filters with the high total throughput capacity in the depth of the fibrous material. They are ideally suited for effective retention of particles, colloids and lipids which block more expensive sterilising grade or Mycoplasma retentive membrane filters quickly.

Supplier: Sartorius

Sartofluor® two filter systems are ideally suited for bioburden reduction and particle removal of highly viscous and difficult to filter pharmaceutical solutions. Due to its hydrophilic PES membrane, the filter offers outstanding total throughputs and flow rate performances. Thus ensuring highest process efficiency, minimised filtration costs and short filtration cycle times.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Filter cartridge, Fine filter plug, 508 mm×5 µm

Supplier: ELGA LabWater

Filter cartridge, Replacement cartridge for Vision 250

Supplier: LABCONCO

Filter cartridge, Activated carbon cartridge, 1,8 kg

Supplier: Thermo Fisher Scientific

Filter cartridge, Sanitisation cartridge for E-Pure

Supplier: Thermo Fisher Scientific

Filter cartridge, Easypure®, Pretreatment cartridge, deionized feed

Supplier: GLASWARENFABRIK KARL HECHT

Filter cartridge, Type: Spare cartridge for Aquademat mixed-bed deioniser

Supplier: Thermo Fisher Scientific

Filter cartridge, B-pure™, Final filters, 0,45 μm

Supplier: ELGA LabWater

Filter cartridge, Pre-treatment cartridge, for Option/Prima

Supplier: Thermo Fisher Scientific

Filter cartridge, Replacement cartridges for DI 425, pack of 2

Supplier: VICI JOUR RESEARCH

Filters are constructed of PTFE and CTFE, with a type 316 stainless low pressure drop screen. The inner design of the cartridge ensures the equal distribution of the solvent to the screen.

Supplier: Purite

Filter cartridge, PP8 Puripac deionisation cartridge for Analyst, HP and Select Fusion models (40, 80, 160)

Supplier: Thermo Fisher Scientific

Filter cartridge, Ultrapure cartridges

Supplier: Thermo Fisher Scientific

The cartridge is designed for non-pressure applications, it includes 1 cm barbed hose connections on each end. The 100% virgin polypropylene cartridge rinses to high quality quickly. A colour indicator shows when the resin cartridge is exhausted.

Supplier: ELGA LabWater

The Ultra is available in five versions that specifically meet the different needs of the laboratories. Ultra Scientific delivers ultrapure water continuously. Its 2-cartridge pack ensures a constant water supply that meets the most demanding applications of scientists. Ultra Ionic meets the requirements of applications as critical as those of chromatography or spectrophotometry by eliminating residual ionic and organic fractions from pretreated water. Ultra Analytic by integrating a 185 nm UV lamp produces water with an exceptionally low TOC level (2 ppb). Display of TOC level in ppb. Ultra Bioscience ensures the production of ultramureal pyrogen-free water (in vitro fertilization, cell cultures). Ultra Genetic incorporates a 185nm UV lamp and an ultrafiltration module. Display of TOC level in ppb.