Gas Generators

Supplier: LUCIDITY

Generator that produces all necessary gasses required to run the Lucidity GC-FID.

Supplier: PEAK SCIENTIFIC

The NG range is designed specifically for use as make up and carrier gas for GC applications, which require ultra high purity nitrogen for operation.

Supplier: PEAK SCIENTIFIC

CG15L generates zero air by removing carbon dioxide and moisture from the air for applications requiring a higher performance than zero air models.

Supplier: PEAK SCIENTIFIC

Precision Nitrogen 250 generator provides a constant and consistent source of nitrogen for detector make-up gas at standard/typical detection levels for GC applications, as well as headspace vial pressurization, purge and trap, tube conditioning for thermal desorption and sample preparation.

Supplier: PEAK SCIENTIFIC

This generator is suitable for carrier gas and flame gas at trace detection limits. Hydrogen purity 99,9999%. Moisture content <1 ppm.

Supplier: PEAK SCIENTIFIC

Precision Hydrogen series hydrogen generators are suitable for carrier gas and flame gas at standard detection limits. Hydrogen purity: 99,9995%.

Supplier: PEAK SCIENTIFIC

These precision nitrogen trace generators produce "zero nitrogen" on demand from a compressed air source.

Supplier: PEAK SCIENTIFIC

The Genius 1053 nitrogen generator provides high purity nitrogen at up to 20 litres per minute for laboratory applications. The Genius 1053 can supply nitrogen gas for Rheometers, CD Analysers, MP-AES Sulphur Determination, ALD, Spectropic Elipsometers, FT-IR, Spray Dryers, FAiMES, TGA, DSC and 3D Printing applications at up to 99,995% purity.

Supplier: PEAK SCIENTIFIC

The Precision Zero Air generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used as flame support gas for GC at both standard and trace detection limits.

Supplier: PEAK SCIENTIFIC

The Precision Zero Air generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used as flame support gas for GC at both standard and trace detection limits.

Supplier: PEAK SCIENTIFIC

The Precision air compressor is designed specifically to provide a dedicated, fully integrated compressed air source for Precision Nitrogen and Precision Zero Air gas generators. Housed within the same compact, stackable form factor as the generators, the Precision air compressor module can be added to any Precision stack to give you a complete self contained GC gas solution, even where no house supply is available.

Supplier: PEAK SCIENTIFIC

The Precision Nitrogen 600 has been developed to provide a constant and consistent source of nitrogen for detector make-up gas at standard/typical detection levels for GC applications, as well as headspace vial pressurisation, purge and trap, tube conditioning for thermal desorption and sample preparation. These generators are capable of delivering high purity nitrogen, removing oxygen and moisture via Pressure Swing Adsorption and Carbon Molecular Sieve technology.

Supplier: PEAK SCIENTIFIC

The Genius 1052 nitrogen generator is a proven solution for customers requiring nitrogen for their Leco modulators.

Supplier: PEAK SCIENTIFIC

The NG5000 delivers ultra high purity nitrogen at trace detection limits through Pressure Swing Adsorption technology at flows of up to 5 L/min for GC, DSC and DMA applications as well as other laboratory. This generator requires a high quality source of in-house air to supply the unit.

Supplier: PEAK SCIENTIFIC

The Precision Zero Air generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used as flame support gas for GC at both standard and trace detection limits.

Supplier: PEAK SCIENTIFIC

Membrane technology is at the heart of the Infinity 1031, generating laboratory-grade nitrogen on-site with an existing air supply. With the ability to perform at its maximum 24 hours a day, if required, and minimum maintenance requirements, the Infinity 1031 is a durable, hassle-free solution for Sciex LC-MS instruments.