8709 Results for: "VARIAN"

Supplier: VARIAN

Bond Elut diol (2OH) resembles unbonded silica in its tendency for strong hydrogen bonding with analytes, but can also be employed in the non-polar mode.

Supplier: VARIAN

Agilent JW CP-1301 is a medium polarity column ideal for the analysis of herbicides, pesticides, and many pharmaceutical products.

Supplier: VARIAN

Hadice pro pumpy, PU, Průhledná, Tubing int.Ø: 1,59 mm, Tubing ext.Ø: 3,18 mm, Tloušťka stěny: 0,80 mm, Délka: 25 ft

Supplier: VARIAN

Select Biodiesel columns address the key challenge of good column lifetime when operating at very high temperatures up to 400 °C.

Supplier: VARIAN

Typ kolony: HPLC column, Aqueous SEC of polymers, PL-aquagel-OH, Ø vnitř.: 7,50 mm, Délka: 50 mm, Velikost částic: 15 µm

Supplier: VARIAN

These columns are specially designed for the determination of trace levels of pesticide residue.

Supplier: VARIAN

PL-HCO₃ MP resin, 1,8 mmol/g, 100 Å, 150 - 300 μm, 1 kg

Supplier: VARIAN

The microbore columns are ideal for use with detectors requiring low flow rates such as some mass
spectrometers and with capillary LC systems. Easily accommodates high temperatures for better selectivity and resolution between impurities and the target oligo.

Supplier: VARIAN

Agilent offers a range of tuning and performance standards for LC/MS.

Supplier: VARIAN

PL-Rink resin, 1% DVB, 0,3 mmol/g, 75 - 150 μm, 100 g

Supplier: VARIAN

Syringes made of plastic.

Supplier: VARIAN

CP-Sil 8 CB delivers a linear column response down to femtogram levels.

Supplier: VARIAN

CP-Wax 52 provides higher resolution of low boiling point analytes, and is ideal for a variety of EPA and ASTM methods.

Supplier: VARIAN

CP-Sil 5 CB for Formaldehyde is optimized for the analysis of formaldehyde, water and methanol, and can deliver trace analysis of sulfur compounds and partial permanent gases.

Supplier: VARIAN

PL-FMPB resin, 1% DVB, 1,4 mmol/g, 150 - 300 μm, 1 kg

Supplier: VARIAN

Empore® extraction disks provide a high flow rate solution for large volume sample preparation. By increasing the diameter of the disk used, the disk surface area available for sample passage increases, resulting in better solvent flow rates through the disk.

Supplier: VARIAN

Female luer adapter to ¹/₁₆" fittings

Supplier: VARIAN

ICP-OES supplies and accessories help you maintain the superior performance of your ICP-OES System.

Supplier: VARIAN

Gas clean kit for 8890 and 8860 (includes carrier gas filter, 1/8" connection unit with mounting bracket, and gas clean sensor)

Supplier: VARIAN

CP-Wax 57 CB for Glycols and Alcohols is guaranteed for the analysis of glycols, diols and alcohols. It has a unique, high polarity wax phase that produces symmetrical peaks.

Supplier: VARIAN

Bond Elut™ plexa PAX non-polar/anion-exchange polymeric SPE offers excellent clean-up and reproducibility, and is suitable for polar and non-polar acidic analytes.

Supplier: VARIAN

500 ml solution contains 50 mg/L Al, As, Ba,Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Sr, Zn and 500 mg/L K in 5% HNO₃ + tr HF. Solution must be diluted 10 times prior to use.

Supplier: VARIAN

Pursuit XRs are ultra-purity silica based columns designed to increase productivity.

Supplier: VARIAN

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.

Supplier: VARIAN

Bond Elut OMIX pipette tips reliably purify and enrich femtomole and picomole levels of peptides and proteins prior to MALDI-TOF or LC/MS/MS. The unique monolithic sorbent technology used in Bond Elut OMIX consistently outperforms other tips by delivering uniform flow and strong analyte-to-surface interactions. Bond Elut OMIX tips bind more peptides to deliver better sequence coverage.

Supplier: VARIAN

VersaPlate well plate tubes, CBA, 100 mg

Supplier: VARIAN

Bond Elut™ PPL is a styrene-divinylvenzene (SDVB) polymer that has been modified with a proprietary non-polar surface. PPL will retain even the most polar classes of analytes, including phenols. The large particle size allows ease of flow for viscous or particulate rich water samples, while the high surface area and strong hydrophobicity ensure reproducible extractions with high recoveries upon elution. Bond Elut™ PPL is suitable for EPA Method 528 ‘Determination of Phenols in Drinking Water by SPE and Capillary GC/MS’.

Supplier: VARIAN

Bond Elut™ NEXUS is an ultra-clean polymeric sorbent which has bi-modal porosity and a high surface area. NEXUS offers a nonpolar retention mechanism with no pre-conditioning required. The large particle size makes NEXUS ideal for extractions from highly viscous samples, such as horse urine.

Based on the same base polymer technology, Bond Elut™ NEXUS WCX is a weak cation exchange sorbent that offers extra selectivity for analytes, such as quaternary ammonium drugs and anabolic steroids.

Supplier: VARIAN

VF-200ms is designed with a unique selectivity for compounds rich in dipole-dipole interactions, resulting from the electrophilic nature of the trifluoropropyl stationary phase.

Supplier: VARIAN

Bond Elut C18 EWP uses a special silica with wide pores. This is endcapped.