917 Results for: "JULABO GmbH"

Supplier: JULABO GmbH

JULABO AQUA STABIL is a water disinfectant for use in open baths. This disinfectant prevents contamination of the bath fluid and ensures a longer service life when performing temperature control applications with water. The germicidal effect prevents the formation of algae, bacteria, and microorganisms.

Supplier: JULABO GmbH

Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: JULABO GmbH

High temperature circulators can be used for temperature applications up to 400 °C; units provide powerful heating capacities for shortest heat-up times and rapid compensation of endothermic reactions. Applications include use with reactors, autoclaves, distillation columns, mini plant installations, pilot plants and production facilities. Because of the closed circuit system oxidation is reduced and unpleasant odours and vapours do not escape, even at high temperatures.

Supplier: JULABO GmbH

Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: JULABO GmbH

Y-adapter cable for connecting 1 dual PT100 sensor to 2 Lemosa sockets for LC temperature laboratory controller

Supplier: JULABO GmbH

Fulfil temperature-dependent measurement, control, safety and monitoring tasks for heating mantles, heating baths and heating mats.

Supplier: JULABO GmbH

PURA stainless steel water baths are functional and reliable for everyday operations due to their high material and component quality. The easy to use PURA water baths offer a number of functions and features that enable efficient use in the laboratory.

Supplier: JULABO GmbH

Bath fluids have been carefully selected and proven in long-term service. They are suitable for use with heating and refrigerated circulators whenever water cannot be employed as bath fluid. The choice of bath fluid is critical for best results in temperature control and operation of the circulator.

Supplier: JULABO GmbH

These powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision and a wide working temperature range. The CORIO™ CD controller is an advanced unit with professional technology for demanding applications and can be used for temperature control of internal or external applications. The jet nozzle allows continuous adjustment of the pump stream in the system. The insulated stainless steel baths are durable and have an integrated drain tap. These heating/cooling circulators are ideal for temperature control of samples in a circulator bath or temperature control of an external application. For example: Measuring cells, refractometers, polarimeters, photometers, viscometers, fermenters, electrophoresis chambers, chromatography columns, rotary evaporators and rheometers.

Supplier: JULABO GmbH

Tubing made of stainless steel 1.4404 for use with all Presto process systems.

Supplier: JULABO GmbH

Stainless steel PT100 sensor with 3 m cable, 200×6 mm, Určeno pro: CF31, CF41, F25-HE, F25-HL, F25-ME

Supplier: JULABO GmbH

Lift up stainless steel lid, Určeno pro: TW20, SW22, SW23

Supplier: JULABO GmbH

CORIO™ CP refrigerated/heating circulator combinations with stainless steel bath tanks for internal or external temperature applications from –50 to +200 °C.

Supplier: JULABO GmbH

Tube clamps for CR® tubing ( I.Ø 8 mm), size 1

Supplier: JULABO GmbH

The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.

Supplier: JULABO GmbH

Compact refrigerated/heating circulators which can be used on benchtop or in a fume hood, ideal for temperature control of distillation apparatus or mini plant installation. All four models feature pump connections for external temperature applications and a bath opening for temperature control of small objects directly in the circulator bath. The maximum ambient temperature of +40 °C and air cooled ventilation means the units can be positioned alongside other units or directly in a fume hood.

Supplier: JULABO GmbH

Unstirred water bath

Supplier: JULABO GmbH

DYNEO™ DD refrigerated circulators are powerful cooling units suitable for internal or external applications between –50 and +200 °C. The circulators function precisely and reliably even at elevated ambient temperatures up to +40 °C. The multilingual 8,89 cm colour display and unique rotary knob allow straightforward and intuitive operation. Units have ergonomic handles and a built in drain tap for easy and safe drainage.

Supplier: JULABO GmbH

Stainless steel shaking water baths are suitable for unsupervised continuous operation. The bright, LED Multi-Display showing up to six temperature values is visible from across the lab. Advanced microprocessor technology with PID temperature control eliminates temperature overshoot and provides high temperature stability. Sensitive samples are well protected; as soon as the high and low temperature limits are reached an intermittent tone sounds. If the liquid in the bath reaches a minimum, the unit shuts down completely and a continuous single tone sounds.

Supplier: JULABO GmbH

VALEGRO Ethernet Activation

Supplier: JULABO GmbH

The Booster Heater offers the option of increasing the heating capacity of some MAGIO laboratory circulators by 6 kW, thereby extending their operative range. The Booster Heater can be used in a temperature range from -50 to 300 °C. Intelligent control in combination with MAGIO ensures that it can be integrated into fully automated systems.

Supplier: JULABO GmbH

EtherCAT interface is a protocol converter from EtherCAT to RS232, Určeno pro: All New Presto® series units

Supplier: JULABO GmbH

Analog module interface, Určeno pro: DYNEO DD units

Supplier: JULABO GmbH

DI-filter cartridge, Určeno pro: DI-filter housing, plastic/stainless steel type of SemiChill recirculating coolers

Supplier: JULABO GmbH

Shaking bath, Universal tray for 25 - 1000 ml Erlenmeyer flasks (400×230 mm)

Supplier: JULABO GmbH

The DYNEO™ DD immersion thermostats ensure high-performance in internal and external applications and have a wide range of modern data communication interfaces. Operation and handling is easy using the large TFT colour display and the state of the art turn and push controller.

Supplier: JULABO GmbH

The MAGIO™ series of bridge mounted circulators operate with a working temperature range of −50 to +300 °C* and a heating capacity of up to 3 kW. With their powerful pressure/suction pump the MAGIO™ units are ideal for external temperature applications. An extensive range of accessories and excellent dynamics mean that the MAGIO™ immersion thermostats can be adapted to different tanks and applications.

Supplier: JULABO GmbH

The powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision, and a wide working temperature range. The CORIO™ C immersion thermostat is the basic model, it is ideal for standard internal applications, the CORIO™ CD/CP models are more advanced and can be equipped with an optional pump set for temperature control of external applications. The jet nozzle allows continuous adjustment of the pump stream in the bath. The bath attachment clamp enables either circulator to be mounted on virtually any bath (rectangular or round tanks).

Supplier: JULABO GmbH

Open bath circulator with high quality bath tanks made of transparent plastic or stainless steel.

Supplier: JULABO GmbH

Cooling coil, CORIO™, Určeno pro: CORIO™ CD