Hledali jste: Homogenisers Bench

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and 1,6 mm aluminum oxide particles.

Supplier: IKA

The LABOR-PILOT is a compact and multi-purpose inline laboratory dispersing machine. It is designed for solid-liquid mixing, homogenising, emulsifying, suspending and wet milling. The LABOR-PILOT 2000/4 is suitable for wide range of applications, particularly in the chemical, cosmetic, pharmaceutical, plastics, colours and food industries. It is uniquely designed with advanced technology and is available with six interchangeable modules.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm glass beads and 2 mm yellow zirconium oxide beads.

Supplier: IKA

The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3000 to 25000 rpm for working volumes of 1 to 2000 ml (H2O). The S 25 EC-T-C-18G-ST tool allows temperature measurement and operation time detection through RFID. Device overheating is prevented by continuous temperature monitoring and the setting of temperature limits. The detection of operating time serves to guarantee regular maintenance.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains garnet matrix and one ¼ inch ceramic sphere. Extra ¼" ceramic spheres are packaged separately. Lysing Matrix A tubes have orange caps and are found in the FastDNA™ and FastDNA™ SPIN Kits. Lysing Matrix A is used for all sample types except soil for the subsequent isolation of genomic DNA, RNA, functional proteins and other metabolites and small molecules. This grinding matrix is chemically inert and will not bind nucleic acids.

Supplier: IKA

Model stojanový, rozsah objemu 250 až 30000 ml. Reprodukovatelný provoz díky konstantní rychlosti, i při změnách viskozit.

Supplier: IKA

Many standardised test procedures in the pharmaceutical industry, such as the pharmacopoeia tests described in official compendia (United States Pharmacopeia (USP 905), European Pharmacopoeia (PhEur 2.9.40), etc.), require the crushing and dissolution of tablets as a first step before further analysis. The challenges in sample preparation include the avoidance of cross-contamination between sample batches, time-consuming cleaning and the often small sample quantities.

Supplier: MP Biomedicals

Lysing Matrix E is effective in lysing mixed samples, such as microbe infected tissue, and can be used in RNA extraction from tumours and other difficult tissues.

Supplier: MP Biomedicals

Lysing Matrix D is a critical component of FastPrep® sample preparation system. Each impact-resistant 2 ml tube contains 1,4 mm ceramic spheres. Lysing Matrix D tubes have green caps and are found in the FastDNA™ Spin Kit for Plant and Animal Tissues and FastRNA™ Pro Green Kit for isolation of nucleic acids from plants and animals.

Supplier: IKA

Universal disposable disperser system with disposable sample tubes that can be hermetically sealed. Provides protection and security from infectious sample materials, toxic substances or substances with strong odours.

Supplier: MP Biomedicals

Lysing Matrix B is a critical component of FastPrep® sample preparation system. Each impact-resistant 2 ml tube contains 0,1 mm silica spheres. Lysing Matrix B tubes have blue caps and are found in the FastRNA™ Pro Blue Kit and FastProtein™ Blue Matrix. The fast and easy to use protocol ensures successful lysis with even the most challenging samples for high efficiency and reliability.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1,4 mm ceramic spheres, 0,1 mm silica spheres, and one 4 mm glass bead. Lysing Matrix E tubes have purple caps and found in the FastDNA™ SPIN Kit for Soil and the FastRNA™ Pro Soil Kits. Lysing Matrix E can also be effective in lysing mixed samples, such as microbe infected tissue, and can be used in RNA extraction from tumours and other difficult tissues.

Supplier: IKA

Model stojanový, rozsah objemu 1 až 1500 ml. Pohon digitální T 18 nabízí široký rozsah rychlostí od 3000 do 25000 min⁻¹ , umožňuje pracovat při vysokých obvodových rychlostech i při malých průměrech rotorů. Velký výběr dispergačních prvků zaručuje širokou škálu aplikací.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimizing of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries.

Supplier: IKA

Univerzální jednorázový dispergační systém s jednorázovými zkumavkami, které mohou být hermeticky utěsněny. Poskytuje bezpečnost a ochranu před infekčními vzorky, toxickými látkami nebo látkami se silnými pachy. Ideální pro použití v lékařských, patologických, toxikologických, farmaceutických, imunologických, veterinárních, klinických, potravinářských a kosmetických aplikacích. Jednotky jsou snadno a rychle použitelné, umožňují standardizovanou práci, jsou vhodné pro individuální použití nebo pro použití v sérii a jsou vybaveny funkcí proti zamykání.

Supplier: MP Biomedicals

Titanium’s strength is comparable to steel however its weight is 40% lower. Constructed from titanium, these tubes and grinding matrix are tough enough to stand up to the most demanding mechanical punishment that can cause traditional thermoplastic tubes to crack. The tubes are machined from premium grade billet and deliver superior strength over less expensive production methods. An oblique angle conical bottom provides a better impact surface than the rounded bottoms of deep-drawn tubes.

Supplier: IKA

The high pressure homogeniser HPH is an inline dispersing machine for energy-efficient, continuous production of superfine emulsions. Compared to other IKA inline machines, the dispersing action of the high pressure homogeniser HPH is not based on the rotor/stator principle. The improved homogenising effect is achieved within the homogeniser by means of spontaneous decompression of the liquid from max. 2000 bar to an ambient pressure. With the same energy input, the IKA HPH produces considerably finer emulsions than conventional toothed ring dispersers. The use of high pressure homogenisers is recommended when a disintegration down to the nano range is required; however, these machines do achieve a smaller flow capacity than conventional dispersers. The high pressure homogeniser consists of a high pressure piston pump and a downstream homogenising valve. The pressure build-up within the HPH occurs by means of one or more piston pump(s) which, with the help of ceramic pistons, ensure(s) a volume flow that is independent of pressure and virtually pulsation free. The desired homogenising pressure can be infinitely adjusted. The pressure is reduced in a selected adjustable gap of the homogenizing valve. The quick pressure decrease in a moving medium leads to extremely high turbulences and cavitations, which then bring about the grinding of the raw product. The machine's design can be adapted to fit customer-specific tasks. The high pressure homogeniser is available in two sizes with either one or more piston(s) of varying Ø. These parameters determine the max. homogenising pressure (800 or 2000 bar) possible for a specific machine type, the minimal permitted feeding volume (up to 10 ml) as well as homogenising results and flow capacities.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimising of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries. It is an ideal machine for continuous, circulating and batch processing with interchangeable modules. Many work parameters of the magic LAB® are identical to those of the IKA 2000 inline production machines: UTL, DR, CMS, MHD, MK and MKO. Therefore, the magic LAB® ensures a reliable scale-up by offering the possibility to work with the same method from formulation development to mass production. The basic in-line machine is equipped with the single-stage dispersing module ULTRA-TURRAX® UTL. It is best suited for batch applications and can be adapted for the manufacturing of dispersions from coarse to fine. Compared to a conventional stirrer, the mixing time is reduced by up to 50%. Depending on the application, the basic unit can be modified quickly with different working modules.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

Bead Genie™ is ideal for bead beating, lysing, extraction, or homogenisation applications.

Supplier: VELP SCIENTIFIC

Premium digital homogeniser with advanced safety featuring a powerful brushless motor, electronic speed control, integral timer and counter function. Engineered for homogenisation, emulsification, suspensions, and high-speed mixing of cosmetic, food, and pharmaceutical products, as well as biological tissues.

Supplier: VELP SCIENTIFIC

Powerful digital homogeniser designed for the maximum level of reproducibility in a wide range of applications. Cutting-edge technology and engineering expertise guarantee precision and high shearing force for fast dispersion, homogenisation, emulsification, suspensions, and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products.

Supplier: witeg Labortechnik

Homogenisers with direct controllers for liquid and tissue samplers.

Supplier: BUCHI

Mixer B-400 is designed for efficient homogenisation of a wide range of food and feed samples. The process is based on simultaneous grinding and homogenisation of sample materials by means of volumetric reduction using two rotating blades in a beaker. Automatic electronic monitoring of the speed and the torque allows safe and straight forward operation of the grinding process.

Supplier: schuett-biotec GmbH

Semi-automatic homogeniser ideal for tough tissue that is difficult to homogenise. For gentle homogenising of sensitive biological samples and tough tissue.

Supplier: BELLCO GLASS

Cellector™ homogenisers, made of stainless steel, are for preparation of cell suspensions and gel extraction of proteins.