Hledali jste: Homogenisers Bench

Supplier: MP Biomedicals

FastPrep®-24 5G is a high speed bench top homogeniser offering the ultimate in speed and performance for the lysis of biological samples. It uses a unique, optimised motion to disrupt cells through the multi-directional, simultaneous beating of specialised Lysing Matrix beads on the sample material. Developed for difficult and resistant samples, the FastPrep®-24 5G instrument lyses thoroughly and quickly any tissues and cells and allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: MP Biomedicals

FastPrep-96™ is a versatile high speed homogeniser offering the ultimate in high throughput sample preparation. It is used to homogenise biological samples. FastPrep®-96 lyses thoroughly and quickly any tissues and cells so allowing easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: IKA

Stojanový model, rozsah objemu 2 až 50 litrů.

Supplier: BEHR

Homogenisers for pretreatment, sample splitting and homogenisation of heterogeneous water samples in accordance with German waste water quality control standards.

Supplier: VWR Collection

The VWR® 4-place Mini Bead Mill homogeniser is compact and powerful.

Supplier: VWR Collection

Tyto kompaktní homogenizátory jsou vhodné pro všechny standardní dispergační úkoly a intenzivní míchání. Jednotky jsou robustní a jejich stabilita zabraňuje pulsačním oscilacím a vibracím, je také jednoduchá a bezpečná výměna agregátů pro různé úkoly.

Supplier: VWR Collection

Kulový mlýn pro rozmělňování vzorků s malým objemem. Zařízení lze rovněž použít pro třepání/míchání mikrozkumavek a mikrodestiček. Zařízení má široký rozsah použití v různých odvětvích vědy od geologie po biotechnologii.

Supplier: VWR Collection

The VWR® Bead Mill homogeniser is a part of the newest generation of Bead Mill homogenisers. This economical system is specifically designed for grinding, lysing and homogenisation of up to 16 samples. Using sample tubes pre-filled with a variety of lysing beads, the VWR Bead Mill vigorously and uniformly shakes the tubes providing an efficient, consistent high yield and quality homogenisation usually in less than 40 seconds.

Supplier: KINEMATICA

Stand model, digital, volume range 0,1 ml to 10 litres. Powerful unit for a wide range of dispersing and homogenising applications in the laboratory using the rotor/stator principle. Remote operation can be achieved with PC control using the supplied software and selection of the AUTO–mode.

Supplier: KINEMATICA

Stand model, volume range 0,05 to 2500 ml for dispersing, homogenising, extractions, cell disruption, mixing, emulsifying and suspending. This model replaces the PT 1600 E and the PT 2100 incorporating the best aspects of both models.

Supplier: VWR Collection

VWR® Bead Mill MAX je prémiový model řady homogenizérů VWR Bead Mill. VWR Bead Mill MAX slouží k mletí, lýze a homogenizaci nejnáročnějších vzorků s opakovatelnými výsledky. Jedinečný pohyb držáku zkumavek zajišťuje vnitřní pohyb kuliček, omezuje víření a vytváří největší nárazovou sílu ze všech kuličkových mlýnů na trhu.

Supplier: KINEMATICA

Stand model, volume range 0,1 to 10000 ml. Benchtop homogeniser with powerful motor and space-saving slimline design, which is easy to handle. Ideal for any dispersing and homogenising task. Interchangeable drive extensions mean different types of stand can be used.

Supplier: KINEMATICA

Stand model, volume range 0,1 ml to 30 litres. The powerful PT 6100D was designed to deliver exactly reproducible homognising conditions for volumes up to 30 litres with the option to select and vary speed and time of operation, whilst monitoring the temperature. The unit can be controlled via the membrane keypad or from a PC using KIN software via an RS232 interface.

Supplier: MP Biomedicals

Metal bead lysing matrix contains 3,175 mm diameter stainless steel.

Supplier: MP Biomedicals

FastPrep®-24 is used to homogenise biological samples. It lyses thoroughly and quickly any tissues and cells and thus allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 0,8 mm zirconium silicate beads.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains one 6,35 mm, 0,25 cal stainless-steel grinding ball.

Supplier: MP Biomedicals

Each impact-resistant tube contains 1,6 mm aluminum oxide particles and 1,6 mm silicon carbide particles.

Supplier: IKA

The T 25 easy clean digital is a high-performance dispersing instrument with electronic speed control from 3000 - 25000 rpm for working volumes of 1 - 2000 ml (H₂O).

Supplier: OHAUS

The HT (High Throughput) lysing bead mill laboratory homogeniser provides efficient solutions for grinding, lysing, pulverising, mixing and homogenising in sample preparation applications.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and a 4 mm black ceramic sphere.

Supplier: IKA

Model stojanový, rozsah objemu 1 až 2000 ml. Homogenizátor T 25 je ideální pro aplikace, jako je homogenizace vzorků odpadních vod, pro použití v laboratorních reaktorech, dispergační práce pod vakuem/tlakem a příprava vzorků v lékařské diagnostice.

Supplier: IKA

The UTTD control life science solution package was specially put together to meet the critical challenges of homogenising tissue, cartilage and bone samples: homogeneous comminution of the samples and protection against cross-contamination.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1 mm silica spheres. Lysing Matrix C tubes have red caps and are found in the FastRNA™ Pro Red Kit and FastProtein Red Matrix. Lysing Matrix C is used primarily for lysis of yeast and fungi and can also be used for moulds, spores and filamentous algae.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm glass beads and 2 mm yellow zirconium oxide beads.

Supplier: IKA

Powerful disperser for volumes ranging from 1 to 2000 ml (H2O) with digital speed display. The wide speed range of 600 to 25000 rpm facilitates work with high circumferential speeds. An extensive selection of dispersing shafts makes multiple applications possible. The application range includes homogenisation and dispersion tasks for use under vacuum in the IKA laboratory reactors.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains one 6,35 mm diameter zirconium oxide coated ceramic grinding sphere.

Supplier: MP Biomedicals

Lysing Matrix B tubes are used primarily for lysis of gram positive and gram negative bacteria, and will also disrupt fungal tissue and spores

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 0,5 mm diameter yttria-stabilised zirconium oxide beads.

Supplier: IKA

The LABOR-PILOT is a compact and multi-purpose inline laboratory dispersing machine. It is designed for solid-liquid mixing, homogenising, emulsifying, suspending and wet milling. The LABOR-PILOT 2000/4 is suitable for wide range of applications, particularly in the chemical, cosmetic, pharmaceutical, plastics, colours and food industries. It is uniquely designed with advanced technology and is available with six interchangeable modules.