"Bohlender"

Supplier: Bohlender

Stirrer shafts made of borosilicate glass with integrated counterbores for the three stud screws of the rotor of the magnetic stirrer head.

Supplier: Bohlender

For tubing with O.D. 1,6 mm (¹/₁₆") and 3,2 mm (¹/₈").

Supplier: Bohlender

Powder funnels, made of borosilicate glass with outlet pipe of PTFE, connection with GL screw caps of PPS or ground joint.

Supplier: Bohlender

Conductive corrugated tubing with nominal width and circular corrugations around the longitudinal axis.

Supplier: Bohlender

Magnetic stirrer heads designed with gastight permanent magnetic coupling with ball bearing encapsulated in ceramics and square connection for cardan joint.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the blade made completely of PTFE.

Supplier: Bohlender

Pressure compensation sets consisting of screw cap made of PPS for GL thread, PTFE/silicone gasket and exchangeable filtering membrane made of PTFE. Filtering membranes (2 µm) made of PTFE.

Supplier: Bohlender

Vario 2-part coupling to connect elastic tubing with non-elastic tubing made of PTFE, glass, metal or other plastics.

Supplier: Bohlender

PP screw cap, blue and PTFE body.

Supplier: Bohlender

PPS screw cap, blue, distributor body made from PTFE.

Supplier: Bohlender

Adapters can be screwed together into multi-stage filters (such as prefilter, main filter). The low weight easily allows exchange of the optionally available filtering membranes.

Supplier: Bohlender

PTFE.

Supplier: Bohlender

These glass fibre reinforced PA fork wrenches can be used for tightening or opening screw joints also at high working temperatures.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with six radial paddles.

Supplier: Bohlender

Valve made from PPS with flow body made from PTFE. Can be used as a pressure relief valve with adjustable control of pressure or as a valve to prevent a fall in pressure during the filling process. Flow body with 2 GL 18 threaded connectors and valve with toggle for manual venting by tightening, set screw and lock nut to adjust and fix the application pressure in the range from 0,1 to 10 bar (factory setting 1,5 bar).

Supplier: Bohlender

PTFE compound, glass shaft. These gastight stirrer heads are ideal for PTFE-jacketed stirrer shafts from BOLA and are also suitable for shortened stirrer shafts. Suitable for high speeds of up to 1500 min⁻¹.