Masterflex® MasterSense® Piston Pump Systems

Dodavatel: Avantor Fluid Handling

Dodavatel: Avantor Fluid Handling

Certifikáty

Masterflex® MasterSense® Piston Pump Systems

10+

Přejít na:

Specifications for Product Family Product Family Options Services Příslušenství

O tomto produktu

Versatile piston pump systems for high-accuracy fluid delivery and dispensing with an intuitive touch-screen interface.

Powerful, space-efficient drives will accept FMI Q-Series and RH-Series piston pump heads
Piston pump technology offers high accuracy dispensing and repeatability
Q-Series FMI Pump heads feature fine tune stroke length adjustment for precision volume control
High pressure capability (up to 100 psi)
12,7 cm (5'') capacitive TFT/RGB touch screen for crisp resolution and a wide viewing angle
Single-point pressure monitoring provides real-time pressure display and alarms for process reliability
Continuous run, volume dispense, and time dispense modes - batch control and interval/off time in volume and time modes
Save and recall up to 50 programs to simplify up set up and reduce errors
Over-the-air firmware updates let you take full advantage of improvements in drive features and functionality
Built-in connectivity options include Ethernet/IP™, PROFIBUS, analog I/O, and serial control
Three-level user access - gives you the option of controlling who can operate the pump and at what level
Drive housing is constructed of 316 stainless steel - IP 66 and NEMA 4X rated for washdown
High viscosity capability (up to 500 centipoise)

These Masterflex® MasterSense™ piston pump systems provide high-repeatability, low-maintenance, and excellent chemical compatibility for high-accuracy dispensing or transfer applications. Piston pump technology delivers fluid handling precision even in high pressure applications. Increase process reliability by utilizing integrated pressure monitoring with built-in alarms and shut offs from a sensor directly installed into the process flow path. Pumps feature greater flow up to 2,3 LPM and include washdown 316 stainless steel housings for use in critical process applications and environments.

Ideal for high accuracy dispensing and metering applications which require long duration without the need for batch to batch changes such as adhesives, etching, viscous fluid handling, solvent extraction, ink circulation/dispensing, and pulp and paper processing. The inert wetted materials also make these perfect for research and development. Recommended for clean fluids up to 500 centipoise.

Pump drives feature a variety of built in options for remote communications. EtherNet/IP™ control is available via RJ45 port; PROFIBUS is available via 9-pin connector. RS232 serial control is available via a USB-A port (requires cable MFLA78006-90). A 31-pin connector allows analog input and output controls or use of a footswitch.

Certifications: UL, cUL, CE, ISO9001, RoHS, REACH.

Accessories information: In-line pressure sensors are available for direct connection into pump drive (order separately). Choose from a variety of tubing and fitting options from Masterflex® to complete your full pump system or reach out to our technical support for product selection assistance.

Ordering information: Each model includes a country specific plug/cord set; choose the catalog number with desired country plug type. All units include an IEC 320 socket with a detachable standard US three prong power cable. See country plug description .

Delivery information: Includes 1,8 m (6') line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please order the specific catalog number with the desired plug type.

3 Dostupných variant níže

Jump to Accessories

Return Policy

Product Details & Documents

Versatile piston pump systems for high-accuracy fluid delivery and dispensing with an intuitive touch-screen interface.

Powerful, space-efficient drives will accept FMI Q-Series and RH-Series piston pump heads
Piston pump technology offers high accuracy dispensing and repeatability
Q-Series FMI Pump heads feature fine tune stroke length adjustment for precision volume control
High pressure capability (up to 100 psi)
12,7 cm (5'') capacitive TFT/RGB touch screen for crisp resolution and a wide viewing angle
Single-point pressure monitoring provides real-time pressure display and alarms for process reliability
Continuous run, volume dispense, and time dispense modes - batch control and interval/off time in volume and time modes
Save and recall up to 50 programs to simplify up set up and reduce errors
Over-the-air firmware updates let you take full advantage of improvements in drive features and functionality
Built-in connectivity options include Ethernet/IP™, PROFIBUS, analog I/O, and serial control
Three-level user access - gives you the option of controlling who can operate the pump and at what level
Drive housing is constructed of 316 stainless steel - IP 66 and NEMA 4X rated for washdown
High viscosity capability (up to 500 centipoise)

Certifications: UL, cUL, CE, ISO9001, RoHS, REACH.

Documents

3D Model - Masterflex® MasterSense™ Piston Drive

Manuální

Další podrobnosti o produktu

Masterflex MasterSense™ EtherNet/IP EDS File

Produktová literatura

Mastersense Gear and Piston Process Pumps

Specifications for Product Family

Specifikace

Model:
77976-60
77976-61
77976-62

Duty cycle continuous:
Yes
Yes
Yes

Inlet connection:
¹/₄" OD Tubing
¹/₄" NPT (F)
¹/₄" OD Tubing

Maximální tlak:
4 bar (60 psi)
6,9 bar (100 psi)
1,7 bar (25 psi)

Minimální teplota:
–46 °C (–50 °F)
–46 °C (–50 °F)
–46 °C (–50 °F)

Maximální teplota:
121 °C (250 °F)
121 °C (250 °F)
121 °C (250 °F)

Maximální viskozita:
500 cP
500 cP
500 cP

Minimální průtok:
32 ml/min
72 ml/min
128 ml/min

Min. motor RPM:
30 rpm
30 rpm
30 rpm

Motor enclosure type:
IP 66
IP 66
IP 66

Výstupní připojení:
¹/₄" OD Tubing
¹/₄" NPT (F)
¹/₄" OD Tubing

Napájení:
90 - 260 VAC; 50/60 Hz
90 - 260 VAC; 50/60 Hz
90 - 260 VAC; 50/60 Hz

Suction lift, wet:
450 cm of H₂O (180" H₂O)
450 cm of H₂O (180" H₂O)
450 cm of H₂O (180" H₂O)

Máčené materiály:
Ceramic piston and cylinder liner, PVDF cylinder body
Ceramic piston and cylinder liner, stainless steel cylinder body
Ceramic Piston, PVDF Cylinder Body, Ceramic Cylinder Liner

Proti odkapávání:
Yes
Yes
Yes

Materiál trupu:
PVDF
Stainless Steel
PVDF

Differential pressure:
4 bar (60 psi)
6,9 bar (100 psi)
1,7 bar (25 psi)

Pohon:
07576-60
07576-60
07576-60

Min. viscosity:
0,5 cP
0,5 cP
0,5 cP

Remote I/O:
EtherNet/IP, PROFIBUS, Serial (ASCII), 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
EtherNet/IP, PROFIBUS, Serial (ASCII), 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
EtherNet/IP, PROFIBUS, Serial (ASCII), 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure

Vratný:
+
+
+

Run dry:
Yes (intermittent)
Yes (intermittent)
Yes (intermittent)

Sensor input:
Pressure, 0 to 20 mA, 0 to 10 V
Pressure, 0 to 20 mA, 0 to 10 V
Pressure, 0 to 20 mA, 0 to 10 V

Sensor input accuracy (aux port):
±0,2% full scale
±0,2% full scale
±0,2% full scale

Záruka:
Two years
Two years
Two years

Specifikace

Product Family Options

Non-US Plug Models

Informace o produktu

Sekvence
Průtoková rychlost
Maximální průtok
Max. motor RPM
Napájení
Šířka
Délka
Výška
Hlava pumpy
Dostupnost
Price
MFLX77976-60-EU
MasterSense™ piston pump system, 32 - 576 ml/min, 230 VAC
MasterSense™ piston pump system, 32 - 576 ml/min, 230 VAC
07
0,32 ml/rev
576 ml/min
1800 rpm
90 - 260 VAC; 50/60 Hz
236 mm
524 mm
278 mm
MFLX07104-54
Přihlásit se pro dostupnost
Přihlásit se pro dostupnost
1 * 1 KS
1 * 1 KS - 203 250,00 Kč
203 250,00 Kč
1 * 1 KS
203 250,00 Kč
Specifikace:
2 month warranty
CE certificate
IP66 washdown
ISO9001
More
Specifications
Cat. No.
MFLX77976-60-EU
Model
77976-60
Duty cycle continuous
Yes
Inlet connection
¹/₄" OD Tubing
Maximální tlak
4 bar (60 psi)
Minimální teplota
–46 °C (–50 °F)
Maximální teplota
121 °C (250 °F)
Maximální viskozita
500 cP
Minimální průtok
32 ml/min
Min. motor RPM
30 rpm
Motor enclosure type
IP 66
Výstupní připojení
¹/₄" OD Tubing
Napájení
90 - 260 VAC; 50/60 Hz
Suction lift, wet
450 cm of H₂O (180" H₂O)
Máčené materiály
Ceramic piston and cylinder liner, PVDF cylinder body
Proti odkapávání
Yes
Materiál trupu
PVDF
Differential pressure
4 bar (60 psi)
Pohon
07576-60
Min. viscosity
0,5 cP
Remote I/O
EtherNet/IP, PROFIBUS, Serial (ASCII), 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Vratný
+
Run dry
Yes (intermittent)
Sensor input
Pressure, 0 to 20 mA, 0 to 10 V
Sensor input accuracy (aux port)
±0,2% full scale
Záruka
Two years
2 month warranty
CE certificate
IP66 washdown
ISO9001
MFLX77976-61-EU
MasterSense™ piston pump system, 72 - 1290 ml/min, 230 VAC
MasterSense™ piston pump system, 72 - 1290 ml/min, 230 VAC
15
0,71 ml/rev
1290 ml/min
1800 rpm
90 - 260 VAC; 50/60 Hz
236 mm
524 mm
278 mm
MFLX07104-66
Přihlásit se pro dostupnost
Přihlásit se pro dostupnost
1 * 1 KS
1 * 1 KS - 202 250,00 Kč
202 250,00 Kč
1 * 1 KS
202 250,00 Kč
Specifikace:
2 month warranty
CE certificate
IP66 washdown
ISO9001
More
Specifications
Cat. No.
MFLX77976-61-EU
Model
77976-61
Duty cycle continuous
Yes
Inlet connection
¹/₄" NPT (F)
Maximální tlak
6,9 bar (100 psi)
Minimální teplota
–46 °C (–50 °F)
Maximální teplota
121 °C (250 °F)
Maximální viskozita
500 cP
Minimální průtok
72 ml/min
Min. motor RPM
30 rpm
Motor enclosure type
IP 66
Výstupní připojení
¹/₄" NPT (F)
Napájení
90 - 260 VAC; 50/60 Hz
Suction lift, wet
450 cm of H₂O (180" H₂O)
Máčené materiály
Ceramic piston and cylinder liner, stainless steel cylinder body
Proti odkapávání
Yes
Materiál trupu
Stainless Steel
Differential pressure
6,9 bar (100 psi)
Pohon
07576-60
Min. viscosity
0,5 cP
Remote I/O
EtherNet/IP, PROFIBUS, Serial (ASCII), 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Vratný
+
Run dry
Yes (intermittent)
Sensor input
Pressure, 0 to 20 mA, 0 to 10 V
Sensor input accuracy (aux port)
±0,2% full scale
Záruka
Two years
2 month warranty
CE certificate
IP66 washdown
ISO9001
MFLX77976-62-EU
MasterSense™ piston pump system, 128 - 2300 ml/min, 230 VAC
MasterSense™ piston pump system, 128 - 2300 ml/min, 230 VAC
23
1,27 ml/rev
2300 ml/min
1800 rpm
90 - 260 VAC; 50/60 Hz
236 mm
524 mm
278 mm
MFLX07104-53
Přihlásit se pro dostupnost
Přihlásit se pro dostupnost
1 * 1 KS
1 * 1 KS - 202 250,00 Kč
202 250,00 Kč
1 * 1 KS
202 250,00 Kč
Specifikace:
2 month warranty
CE certificate
IP66 washdown
ISO9001
More
Specifications
Cat. No.
MFLX77976-62-EU
Model
77976-62
Duty cycle continuous
Yes
Inlet connection
¹/₄" OD Tubing
Maximální tlak
1,7 bar (25 psi)
Minimální teplota
–46 °C (–50 °F)
Maximální teplota
121 °C (250 °F)
Maximální viskozita
500 cP
Minimální průtok
128 ml/min
Min. motor RPM
30 rpm
Motor enclosure type
IP 66
Výstupní připojení
¹/₄" OD Tubing
Napájení
90 - 260 VAC; 50/60 Hz
Suction lift, wet
450 cm of H₂O (180" H₂O)
Máčené materiály
Ceramic Piston, PVDF Cylinder Body, Ceramic Cylinder Liner
Proti odkapávání
Yes
Materiál trupu
PVDF
Differential pressure
1,7 bar (25 psi)
Pohon
07576-60
Min. viscosity
0,5 cP
Remote I/O
EtherNet/IP, PROFIBUS, Serial (ASCII), 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Vratný
+
Run dry
Yes (intermittent)
Sensor input
Pressure, 0 to 20 mA, 0 to 10 V
Sensor input accuracy (aux port)
±0,2% full scale
Záruka
Two years
2 month warranty
CE certificate
IP66 washdown
ISO9001