You searched for: Fitinky a konektory

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: EDWARDS HIGH VACUUM METTLER

Cross pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Blanking flanges made of aluminium or stainless steel.

Supplier: witeg Labortechnik

Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.

Supplier: PIEPER FILTER

PP, translucent.

Supplier: PIEPER FILTER

Made of PP, translucent.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-309, plug for 1/4-28 flat bottom ports, standard knurl, Delrin®*, Černá

Supplier: SEMADENI

PP, gray.

Supplier: PIEPER FILTER

PP, translucent.

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: SEMADENI

Connectors, Y- shaped, made of PP, natural color.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-124H, fitting, micro headless knurl, PEEK blue, 6-32 coned port, for 360 μm OD tubing, 5000 psi, PEEK

Supplier: VICI JOUR RESEARCH

VICI Stainless Steel Unions are made for joining two pieces of ¹/₁₆" Ø tubing, or an ¹/₈" tube. They are precision machined with a focus on the concentricity of the bore as well as on the finish of the surfaces to give an absolute leak-free connection. These Unions have internal threads, which we recommend for most applications. Internal threads make stronger connections and internal fitting details provide the lowest dead volume for high performance instrumentation.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: SEMADENI

Hose connector, PE-HD, D = 9 mm

Supplier: GILSON

The Gilson safe aspiration station Y-shaped tubing connector is for use with the Gilson safe aspiration station.

Supplier: PIEPER FILTER

Mini connectors for tubing, made of PP, translucent, T-shape.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: UPCHURCH SCIENTIFIC

PEEK Zero Dead Volume unions: Zero Dead Volume (ZDV) unions come complete with two F-300 fingertight fittings for ¹/₁₆" Ext.Ø tubing and are pressure rated to 5000 psi (344 bar).

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: SEMADENI

PP, natural

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.