Hledali jste: Fitinky a konektory

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing pieces made of aluminium.

Supplier: EDWARDS HIGH VACUUM METTLER

Elbows 90°, DN 16 mm, Hliník

Supplier: SEMADENI

Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-482T-01, flanged nut, ETFE natural, for 1/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Specifically designed for Ismatec® pump tubings.

Supplier: UPCHURCH SCIENTIFIC

VacuTight™ fittings provides airtight, dependable connections under vacuum and low pressure conditions. These nuts have streamlined profiles for use in systems requiring a large number of connections in a small area, the ferrules are small size ensures sufficient nut/thread engagement, even in shallow ports. Ideal for combichem, high throughput screening, clinical diagnostic and other automated liquid handling applications.

Supplier: VICI JOUR RESEARCH

Adapter, connects safety exhaust filter to SCAT® waste caps and A.I.T. smart waste caps

Supplier: PIEPER FILTER

Connectors, made of PP, natural.

Supplier: VICI JOUR RESEARCH

These fittings are designed for capillary LC, used in HTS techniques, proteomics, genomics, and other newer developments in industrial research requiring small sample size for reduction of analysis time, fittings and unions are easy to handle.

Supplier: VICI JOUR RESEARCH

Unions for easy connection of low pressure solvent lines.

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-136, flangeless fittings includes nut, PEEK natural and washer, ETFE blue, 5/16-24 flat bottom port, 2000 psi, for 1/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: PIEPER FILTER

L-shaped connectors for tubing, made of PP, translucent.

Supplier: UPCHURCH SCIENTIFIC

PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: Lenz Laborglas GmbH & CO.KG

Connectors, made of PBT, red with integrated silicone (VMQ)-PTFE sealing.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: EDWARDS HIGH VACUUM METTLER

Cross pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Blanking flanges made of aluminium or stainless steel.