These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Quick Connect System Sentry® QCII
Supplier: ENTEGRIS
The safe and convenient method of interfacing reusable FluoroPure® chemical containers with bulk delivery systems. The patented design is key coded to assure against unsafe chemical mixing while ensuring dedicated clean service. One connection provides dispensing, venting and level detection.
Expand 60 Items
Water trap with barbed connectors
Supplier: BW TECHNOLOGIES
Water trap, barbed connectors
Expand 1 Items
Tubing connectors, T-shaped
Supplier: Lenz Laborglas GmbH & CO.KG
Tubing connectors made of DURAN® borosilicate glass,T-shaped with three glass olives.
Expand 2 Items
EasyLOK fittings
Supplier: Trajan Scientific and Medical
These fittings are composed of a knurled stainless steel nut and a double ended PEEK™ ferrule.
Expand 2 Items
Tubing connectors, Y shaped
Supplier: Lenz Laborglas GmbH & CO.KG
Tubing connectors made of DURAN® borosilicate glass,Y-shaped with three glass olives.
Expand 2 Items
Tubing connectors, straight
Supplier: Lenz Laborglas GmbH & CO.KG
DURAN®, borosilicate glass, clear.
Expand 1 Items
Vespel® Graphite GC Ferrules
Supplier: Trajan Scientific and Medical
Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.
Expand 54 Items
CPC® Non-Spill Quick-Disconnect Fittings, Bodies and Inserts
Supplier: Avantor Fluid Handling
Stop leaks in your line - spillage as low as 0,10 ml.
Expand 9 Items
Venture Tech Sanitary Clamp Tee Fittings, PFA
Supplier: Avantor Fluid Handling
Ideal for extremely corrosive materials—PFA will not rouge or pit.
Expand 2 Items
CPC® Sanitary Steam-in-Place Connectors, Two-Cycle
Supplier: Avantor Fluid Handling
Ensure a sterile connection.
Expand 3 Items
Masterflex® Adapter Fittings, Compression to Male Threaded, Elbows, Avantor®
Supplier: Avantor Fluid Handling
Maintain a permanent connection with these adapters.
Expand 2 Items
Venture Tech PFA Sanitary Clamps, 90° Elbow
Supplier: Avantor Fluid Handling
Ideal for extremely corrosive materials—PFA will not rouge or pit.
Expand 1 Items
Masterflex® Adapter Fittings, Hose Barb to Male NPT Threaded, Straight, PFA, Avantor®
Supplier: Avantor Fluid Handling
Quick and easy assembly.
Expand 3 Items
b.safe Desktop Distributors
Supplier: Bohlender
Central waste collection from several HPLC systems. Capillaries and hoses are connected without kinks using the b.safe Fittings and b.safe Hose connectors included in the scope of delivery. The liquid solvent waste flows off directly and residue-free via the vertical hole inside the Desktop Distributor.
Expand 4 Items
End caps, sanitary fitting, Nalgene®
Supplier: Thermo Fisher Scientific
Nalgene®, End cap with sanitary fittings, 3" flange, white, PP, Ø otvoru: 2×3/4" mm
Expand 2 Items
One-piece front and back ferrules, OGF
Supplier: Trajan Scientific and Medical
These reusable ferrules are made from 100% graphite. They have a temperature limit of 450 °C.
Expand 25 Items
MPX series ¹/₂" flow, quick disconnect coupling for bio and pharma
Supplier: CPC COLDER
These ¹/₂" flow quick disconnect couplings are manufactured specifically for the bio and pharma markets.
Expand 8 Items
Quick couplings, b.safe
Supplier: Bohlender
Two-part tubing coupling made of PP with PFA Fitting to connect capillaries with Ext.Ø. 3,2 mm. The passage with the integrated quick lock is tightly closed through loosening the coupling. Tubing connections are easily interrupted without dripping from the tube, tubes and removal flasks are tightly closed during exchange. Version and scope of delivery as per below chart.
Expand 5 Items
Fittings preparative, b.safe
Supplier: Bohlender
Fittings made of PTFE to fix tubing in the tubing connectors (thread NPT ¹/₈") of b.safe caps. The conical seal cone clamps the tubing and tightens at the connector. Packing unit: 1 piece.
Expand 4 Items
BarbLock™ Ultra-Secure Tubing Retainers
Supplier: Saint Gobain Life Sciences
When it comes to retaining flexible tubing and hose onto barbed fittings, BarbLock™ retainers have become the standard in many industries because they solve inherent leak path problems in sensitive and demanding applications. The retainer uses no adhesives or solvents, is ideal for systems transferring delicate liquids or gases.
Expand 6 Items
CPC® High-Flow Quick-Disconnect Fittings, GHT (M) Bodies and Inserts
Supplier: Avantor Fluid Handling
No more leaks—valved couplings automatically shut off flow.
Expand 1 Items
CPC® APC Acetal Quick-Disconnect Fittings, Bodies and Inserts
Supplier: Avantor Fluid Handling
Fittings connect in a snap.
Expand 6 Items
CPC® Miniature Quick-Disconnect Fittings, Threaded Bodies
Supplier: Avantor Fluid Handling
No more kinked tubing—allows tubing to rotate freely.
Expand 2 Items
CPC® Miniature Quick-Disconnect Fittings, Panel-Mount Hose Barb Bodies
Supplier: Avantor Fluid Handling
No more kinked tubing - allows tubing to rotate freely.
Expand 4 Items
Masterflex® Adapter Fittings, Compression to Female Threaded, Straight, Avantor®
Supplier: Avantor Fluid Handling
Maintain a permanent connection with these adapters.
Expand 2 Items
Stainless Steel Male Threaded Elbow to Push-to-Connect Adapters
Supplier: Avantor Fluid Handling
The ease of push-to-connect and the durability of 316 stainless steel.
Expand 3 Items
Adapter Fittings, Compression to Male Threaded, Elbows
Supplier: Avantor Fluid Handling
Maintain a permanent connection with these adapters.
Expand 1 Items
Cylindrical Barbed Straight Connectors, PVDF
Supplier: Avantor Fluid Handling
Safe and flexible connection for your most demanding applications.
Expand 2 Items
Pipe fittings, elbows, PureBond®
Supplier: ENTEGRIS
These pipe fittings are made from PFA.
Expand 5 Items
Supplier: Integra
Supplier: EPPENDORF
Supplier: Integra
Supplier: Liebherr
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: Quantabio