Order Entry
Czech Republic
ContactUsLinkComponent
 

 

Deionizátroy

Deionizers remove mineral ions, such as sodium, calcium, iron, copper, chloride, and sulfate, from water, making it highly pure and useful for most laboratory and general manufacturing applications. These units are economical, stand-alone systems that can be customized to meet specific application needs, providing low to medium volumes of deionized water. Built-in meters in most models allow for easy and convenient monitoring of water quality and timed dispensation.

 
Water treatment system, Pure Aqua Service

Water treatment system, Pure Aqua Service

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Expand 1 Items
 
Jednotky na ošetření vody: Čistička vody PG 8595

Jednotky na ošetření vody: Čistička vody PG 8595

Supplier: MIELE

Čistička vody pro dvě plné nebo částečně demineralizované patrony. Kryt vyrobený z bílé nebo nerezové oceli.

Expand 2 Items
 
Resin Column Water Purifiers

Resin Column Water Purifiers

Supplier: SMEG

The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.

Expand 1 Items
 

Water Softener, Envi GreenSOFT

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Ready-to-connect systems for the production of soft water.

Expand 1 Items
 
WaterPro® PS HPLC/UF Hybrid Polishing Station

WaterPro® PS HPLC/UF Hybrid Polishing Station

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Expand 1 Items
 
Deionizers with stainless steel canisters, behropur®

Deionizers with stainless steel canisters, behropur®

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

Expand 1 Items
 
Deioniser, mixed-bed, Aquademat

Deioniser, mixed-bed, Aquademat

Supplier: GLASWARENFABRIK KARL HECHT

Ion exchanger for purified water.

Expand 1 Items
 
Deionisers, Micromeg

Deionisers, Micromeg

Supplier: ELGA LabWater

This wall mounted disposable deioniser produces water up to a quality of 10M.-cm at flows of up to 90 l/hr. Designed for users with a requirement for low volumes deionised water, the Micromeg requires no electrical input as its water quality meter is battery operated.

Expand 1 Items
 
Deionizer, barnstead Bantam™

Deionizer, barnstead Bantam™

Supplier: Thermo Fisher Scientific

It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

Expand 1 Items
 
Deionisers, behropur®

Deionisers, behropur®

Supplier: BEHR

These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Expand 2 Items
 
Deionizers with nylon resin canisters, behropur®

Deionizers with nylon resin canisters, behropur®

Supplier: BEHR

Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Expand 3 Items
 

Deionizer, B-Pure™

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Expand 2 Items
 
 
Recommended for You