Hledali jste: Míchadla

Supplier: GLASWARENFABRIK KARL HECHT

Mini magnetic stirrer without heating platform.

Supplier: KARTELL

PVC.

Supplier: GREINER GASSNER

Borosilicate glass with PTFE stirrer shaft insert and PTB screw cap ideal fit based on the screw fixing and insert position. The medium or gas to be stirred comes into contact with glass or PTFE. As vacuum-tight stirring cannot be achieved due to the cold flow of PTFE (Hostaflon), a sealing element made of Viton is located in the top part of the replaceable stirrer shaft. This sealing element creates a vacuum-tight connection between the stirrer shaft and agitator shafts. This design ensures excellent results from mixing trials in a vacuum, as well as for long-term trials at high speeds.

Supplier: GLASWARENFABRIK KARL HECHT

Stirring rods, Stirring rod, width 3 mm, Plast, Ø: 2,5 mm

Supplier: HAMMACHER KARL

Stirring rods, made from WIRONIT steel. Choice of rods with straight or angled end.

Supplier: Brand

Stirring rods.

Supplier: GLASWARENFABRIK KARL HECHT

Square CERAN® heating plate fully electronic control of the speed and the heating plate temperature, with digital display and timer function.

Supplier: SciLabware

Stirring rods with flattened end forming a paddle 20×9 mm at one end, and flattened smoothed top approximately 9 mm in diameter, which can be used to crush lumps.

Supplier: witeg Labortechnik

DURAN®, borosilicate glass interchangeable stirrer shafts and bearings.

Supplier: SciLabware

A range of PTFE coated stirrer heads designed to screw into the threads on SVL® glass stirrer shafts.

Supplier: SciLabware

Stirring Tools, SVL®, Stirrer bearing with Quickfit® ground glass con

Supplier: GLASWARENFABRIK KARL HECHT

Magnetic stirring bar retriever, Stirring Tools, Délka: 350 mm

Supplier: Bel-Art Products, a Part of SP

Flexible, PTFE rod with a powerful PTFE coated Alnico magnet for retrieving magnetic stirring bars from containers or sink drains and traps which are non-magnetic.

Supplier: witeg Labortechnik

Stainless steel. This is a digital multi-position magnetic stirrer without heating, controlled by microprocessor. Modules consist of 4 or 8 stirring positions on a stainless steel platform, with a single electrical connection. Ideally suited for use in incubators and climatic chambers.

Supplier: Bel-Art Products, a Part of SP

Polyethylene (9,5 mm) with radial magnet (Ø 51 mm). Position the arrester against the vessel bottom.

Supplier: Bel-Art Products, a Part of SP

Flexible PTFE magnetic retriever for removing the largest magnetic stirring bars from deep vessels. Designed with powerful Alnico 5 magnetic end having 102 mm in length.

Supplier: Bohlender

PTFE-encapsulated stirring bar retrievers with extra strong permanent magnet (Neodym). For the removal of stirring bars from aggressive liquids. Especially useful for big, heavy stirring bars up to 400 g.

Supplier: DELTALAB

PP coated stirring bar retriever for the removal of stirrer magnets from vessels of all kinds.

Supplier: KARTELL

PTFE coated stirring bar retrievers for removing magnetic stirrer bars from foodstuff.

Supplier: Bohlender

Bearing necks for receiving tandem magnetic stirring bar. The centre portion will fix to the vessel by means of glue such as silicone hardened in water.

Supplier: Bel-Art Products, a Part of SP

Magnetic stirring bar retriever, with hang-up loop at one end, Spinbar®, Délka: 457 mm

Supplier: GLASWARENFABRIK KARL HECHT

This magnetic stirrer with heating plate is made of anodised aluminium.

Supplier: Bel-Art Products, a Part of SP

PE, to retrieve stirbars without coming into contact with the liquid in the containers.

Supplier: witeg Labortechnik

These high-speed overhead stirrer tools are designed for mixing applications in the laboratory specialised for low- to medium-viscosity materials.

Supplier: VITLAB

Flexible PTFE magnetic stirring bar retriever.

Supplier: Brand

Vytahovač magnetických míchadel, Stirring Tools, Délka: 250 mm

Supplier: Brand

PP-encapsulated stirring bar retrievers for removing magnetic rods from flasks of all kinds.

Supplier: witeg Labortechnik

This flexible coupling fix between motor and stirrer shaft.

Supplier: witeg Labortechnik

Digital multi-position magnetic stirrer ideal for mixing and heating simultaneously. Ideal for heat sensitive procedures in microbiology, biochemistry or sample drying. Units feater a powder-coated steel body which is easy to clean. Each plate can accommodate a support rod.