Hledali jste: Míchadla

Supplier: 2MAG

Hermeticky uzavřený nerezový plášť je odolný vůči vodě, prachu a bakteriím. Základní verze jednotky lze provozovat při teplotách do 50 °C, jednotky pro použití při vysokých teplotách (HT) lze v lázních používat až do teplot 95 °C, v sušárnách až do 200 °C.

Supplier: Bohlender

Stirrer blades made from PTFE, with a set of clamp screws made from a PTFE/PEEK compound.

Supplier: 2MAG

The hermetically sealed stainless steel housing is water, germ and dust-proof. Operating temperatures for the basic version up to 50 °C, for HT version up to 95 °C submerged in water baths, up to 200 °C in ovens. M4 thread is integrated in the stainless steel bottom plate (only for MIXdrive 1 XS basic version).

Supplier: Lenz Laborglas GmbH & CO.KG

Stirring shafts made of precision calibrated glass tube.

Supplier: VELP SCIENTIFIC

Compact magnetic stirrers which are ideal for microtitration, BOD, microbiology and biochemistry. The robust units are powerful and their technopolymer casing resists chemicals. MST Digital has a bright digital display for accurate speed monitoring and an on board timer (1 to 900 minutes or continuous mode) for unattended operation.

Supplier: 2MAG

Ultra-flat, explosion protected stirrer. The hermetically sealed housing is water, germ and dust-proof. Operating temperatures up to 40 °C.

Supplier: 2MAG

Ultra-flat magnetic stirrers with hermetically-sealed stainless steel housing. Operating temperatures up to 50 °C.

Supplier: VELP SCIENTIFIC

Small, simple and effective stirrers specially designed for microtitrations.

Supplier: VELP SCIENTIFIC

Ultraflat magnetic stirrer without moving mechanical components.

Supplier: Schott AG

Very long glass rods made from Borosilicate 3.3 glass.

Supplier: 2MAG

Robust magnetic stirrer with hermetically sealed stainless-steel housing, suitable for highly viscous media. Operating temperatures up to 50 °C.

Supplier: COWIE

High Performance (HP) shaft guides provide an effective guide for use with glass and metal shaft stirrers over a wide range of temperatures without shedding particles from a specially formulated PTFE-PEEK seal whilst maintaining vacuum. The moulded-in PTFE-PEEK guide ring located at the end of the taper provides a guide to assist alignment of the shaft.

Supplier: 2MAG

Ultra-flat magnetic stirrers with stainless steel housing. Operating temperatures up to 100 °C.

Supplier: Thermo Fisher Scientific

The fused quartz rods are manufactured by fusing naturally occurring crystalline silica.

Supplier: COWIE

PTFE. Interchangeable stirring shafts and blades, please order shafts and blades separately.

Supplier: Lenz Laborglas GmbH & CO.KG

Stirrer blades made of PTFE, punched.

Supplier: 2MAG

Robust magnetic stirrer with hermetically sealed stainless steel housing, suitable for highly viscous media. Operating temperatures up to 50 °C.

Supplier: GLASWARENFABRIK KARL HECHT

PTFE coated, magnetic stirring bars.

Supplier: Bel-Art Products, a Part of SP

Spinbar® Magnetic Sink Strainer is a simple solution to prevent your Spinbar® Magnetic Stirring Bars from going down the sink drain.

Supplier: Hach

PFTE coated magnetic stirring bars.

Supplier: VWR Collection

Stirrer, Magnetic Hotplate Stirrer, VWR®, EU-plug, VMS-A, Materiál desky: Nerezová ocel, Maximální kapacita míchání H₂O: 10 L, Rozsah rychlosti: 100 - 2000 min⁻¹, Rozsah teplot: RT...+320 °C

Supplier: VWR Collection

Designed for applications requiring exceptional accuracy, stability, and repeatability these magnetic hotplate stirrers are equipped with superior heating and mixing capabilities. With temperature ranges up to 500 °C and stirring speeds reaching 1600 rpm, the VWR® magnetic hotplate stirrers are equipped to handle any research, academic and industrial application. Available in two sizes.

Supplier: Thermo Fisher Scientific

Floating stirring bar with PTFE coated Alnico V magnet, which is slightly raised off the bottom of the vessel to minimise grinding effect on cells. Legs can be compressed to fit through small openings.

Supplier: VWR Collection

Kompaktní míchačky s keramickou skleněnou deskou poskytují vynikající chemickou odolnost. Jednotky mají digitální zobrazení chybového kódu, indikátor příliš vysoké teploty varuje uživatele před popálením, pevný bezpečnostní okruh, který vypne topení, pokud teplota vyroste nad 550 °C a tři operační módy pro výběr z (standardní, bezpečnostní a nastavení ochrany). Míchačky mají měřítko rychlosti zobrazení a možnost volby přímého připojení snímače teploty PT1000; při použití této funkce je přesnost kontroly v médiu ±0,5 °C.

Supplier: VWR Collection

PTFE povrchová vrstva, jádro ze slitiny kovů vzácných zemin. Pomůcka slouží k odstraňování magnetických míchadel z nádob jakéhokoliv druhu.

Supplier: VWR Collection

VWR® Advanced magnetic hotplate stirrers are designed to deliver accurate and repeatable results in all research, academic and industrial applications. With temperature ranges up to 500 °C, and stirring speeds reaching 1600 rpm, VWR® magnetic hotplate stirrers provide proper mixing and superior temperature control. Available in three sizes and a choice of two top plate materials.

Supplier: Lenz Laborglas GmbH & CO.KG

Flexible coupling made of stainless steel.

Supplier: VELP SCIENTIFIC

Powerful digital hotplate stirrer, equipped with a 177,8 mm square ceramic plate, designed to deliver precise temperature control, advanced stirring, improved safety features, and ease of use.

Supplier: VELP SCIENTIFIC

Illuminated magnetic stirrers with single-position (AMI) or four separately controlled positions (AMI 4). Specially designed for titrations, and particularly for those in which optimum lighting conditions are needed in order to see the final point of colour change well. Particularly recommended for titrations that have weak colour changes during conversion.

Supplier: Lenz Laborglas GmbH & CO.KG

Stirring paddles made of PTFE.