Hledali jste: Čerpadla

Supplier: GRANT INSTRUMENTS

All in one system with integrated pump designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques. An ideal personal tool for independent operation away from an in-line lab vacuum supply.

Supplier: Bel-Art Products, a Part of SP

These system is used to aspirate tissue culture media, supernatants, and chemical wastes.

Supplier: MILLIPORE

The Chemical Duty Pump has a chemically-resistant head and diaphragm for use with corrosive chemicals and solvents.

Supplier: MILLIPORE

Simply connect the pump to your manifold or filtration apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional containers to capture the waste liquid. This brings a significant time saving versus traditional vacuum/pressure pumps or in-house vacuum because the following steps are eliminated: disconnecting the waste containers, emptying liquid waste, cleaning/decontaminating, re-installing the waste containers.

Supplier: MILLIPORE

This laboratory filtration pump is ideal to transfer filtered liquids directly to waste.

Supplier: DWK Life Sciences

DURAN®, borosilicate glass 3.3, clear.

Supplier: Sartorius

The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet transfer pump is ideal for sample filtration in microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. This pump is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

Supplier: Lenz Laborglas GmbH & CO.KG

Duran®, with hose connections. With spiral nozzle. For high performance.

Supplier: Lenz Laborglas GmbH & CO.KG

Water jet pumps made of borosilicate glass with or without non-return valve.

Supplier: DWK Life Sciences

Made of polypropylene.

Supplier: SciLabware

Water jet pump suitable for most laboratory water pressures with integrated non-return valve that increases safety and a detachable vacuum connection for 6 to 9 mm bore tubing.

Supplier: BUCHI

Diaphragm vacuum pump is made up PTFE and it is chemically resistant with a space saving design. It meets all the needs of vacuum generation. It is usable for multiple applications such as evaporation, drying, concentration, suction straining and filteration. It is a maximum longevity product due to robost and stable design and integrated ECO² mode.

Supplier: Heidolph Instruments GmbH & Co.KG

Peristaltic pump heads SP standard 1,6 mm and SP standard 2,5 mm: For simple pumping tasks. Housing made from die-cast aluminium. Rollers made from stainless steel, roller bearings made from polyamide. Rotor equipped with 2 convex rollers; cell cultures will not be damaged. For tubing with wall thickness of 1,6 or 2,5 mm. Rated flow: 0,5 to 3644 ml/min (depending on the drive and tubing used).

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5001 and PD 5006 for standard applications. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there can be no contamination. Suitable for transporting high-viscosity media up to 10000 mPas. The pumps are self-priming, with no seals or valves. They can be used in the food industry for filtering and separating, for water treatment, in biotechnology, and for routine laboratory applications. Pressure and vacuum displacement possible. Maintenance free motors ensure long service life.

Supplier: BUCHI

These V-300 PTFE diaphragm vacuum pumps impresses with its very silent and economical operation. These pumps have been operated at a flow rate of 1,8 m³/h and an ultimate vacuum of 5 mbar.

Supplier: Heidolph Instruments GmbH & Co.KG

Models SP quick 1,6 and 2,5 mm.

Supplier: Heidolph Instruments GmbH & Co.KG

Multi-channel pump heads, models C4, C8, and C12. Can be used in combination with peristaltic pump drives PD 5001, PD 5101, and PD 5201 with the multi-channel adapter. Up to 12 pump channels can be operated simultaneously. Separate metering to different containers in a single operation.

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5101 and PD 5106 for high requirements. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tube, so there is no contamination. Suitable for transporting high-viscosity media, up to 10,000 mPas. The pumps are self-priming, without seals or valves. Can be used in the food industry for filtering and separating, in water treatment, biotechnology, and for routine laboratory applications. Pumping under pressure and vacuum possible. Maintenance-free motors ensure long service life.

Supplier: MILLIPORE

Millivac™ Mini vacuum pumps are compact, maintenance-free pumps that provide a consistent source of vacuum for filtration and other laborabory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models.

Supplier: Heidolph Instruments GmbH & Co.KG

SP vario pump head cover

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5201 and PD 5206 for advanced requirements. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there is no contamination. Suitable for transporting highly viscous media up to 10000 mPas. The pumps are self-priming without seals or valves. Can be used in the food industry for filtering and separating, for water treatment, in biotechnology and routine laboratory applications. Media can be transported under pressure and under vacuum. Maintenance-free motors ensure long service life. Quantities displaced by the pump heads are stored in the program depending on the individual tubes used, and are shown in the digital display. Software may be ordered separately as an accessory. The pump drive is microprocessor-controlled. Equipped with RS232 digital interface; speed, metered quantity, flow rate, pause, and tube dimension can be controlled. Digital display of speed (min⁻¹) and flow rate (ml/min). Digital display of displacement volume (ml) in the case of volume metering. Intermittent metering is available with adjustable pause times. A metered volume can also be specified in addition to the flow rate display. Extremely simple calibration of displacement volume (ml) and flow rate (ml/min).

Supplier: EDWARDS HIGH VACUUM METTLER

Edwards new APG200 series high performance compact pirani gauge is the perfect vacuum measurement solution across a spectrum of applications due to its compact size, LED light ring, integrated set points and flexibility of connections/outputs. 25% reduction in volume compared to the APG100, without any loss in performance. Maximum cable length of 100 m

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Simple brass vacuum/pressure gauge for inclusion in vacuum lines to give coarse vacuum/pressure indication.

Supplier: HARVARD APPARATUS

The Pump 11 Elite series sets a new standard for handling the challenges of new applications. It has served the research community as the work horse infusion pump for micro and macro fluidic applications including MS calibration, reactor dosing, animal drug/nutritional studies, cell injections, electrospinning and more.

Supplier: EDWARDS HIGH VACUUM METTLER

This Active Digital Controller (ADC) is a compact single gauge controller with automatic recognizes compatible Edwards gauges, loads the appropriate look-up table and displays the pressure in commonly used vacuum units.

Supplier: BODE CHEMIE

Dosing pump with plastic mounts used for various size of bottles and 5 L cans.

Supplier: EDWARDS HIGH VACUUM METTLER

TIC Instrument controller is a compact control with a large, clear graphical display, an intuitive user interface and serial communications.

Supplier: EDWARDS HIGH VACUUM METTLER

The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10^-9 mbar.

Supplier: EDWARDS HIGH VACUUM METTLER

Active Inverted Magnetron gauge is a combined unit of the gauge-head and controller. This gauge operates as a cold cathode ionisation gauge, in which pressure is measured indirectly as a function of the current that flows in a Townsend discharge maintained in the body tube.

Supplier: EDWARDS HIGH VACUUM METTLER

Model APG.
These gauges have a measuring range from atmosphere to 1×10⁻⁴ mbar and combine the gauge head and controller in one compact active unit.