Hledali jste: Homogenizátory

Supplier: MP Biomedicals

Each impact-resistant tube contains 1,6 mm aluminum oxide particles and 1,6 mm silicon carbide particles.

Supplier: MP Biomedicals

FastPrep-96™ is a versatile high speed homogeniser offering the ultimate in high throughput sample preparation. It is used to homogenise biological samples. FastPrep®-96 lyses thoroughly and quickly any tissues and cells so allowing easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: IKA

The UTTD control life science solution package was specially put together to meet the critical challenges of homogenising tissue, cartilage and bone samples: homogeneous comminution of the samples and protection against cross-contamination.

Supplier: IKA

Many standardised test procedures in the pharmaceutical industry, such as the pharmacopoeia tests described in official compendia (United States Pharmacopeia (USP 905), European Pharmacopoeia (PhEur 2.9.40), etc.), require the crushing and dissolution of tablets as a first step before further analysis. The challenges in sample preparation include the avoidance of cross-contamination between sample batches, time-consuming cleaning and the often small sample quantities.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 0,8 mm zirconium silicate beads.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains one 6,35 mm, 0,25 cal stainless-steel grinding ball.

Supplier: OHAUS

The HT (High Throughput) lysing bead mill laboratory homogeniser provides efficient solutions for grinding, lysing, pulverising, mixing and homogenising in sample preparation applications.

Supplier: IKA

Model stojanový, rozsah objemu 1 až 1500 ml. Pohon digitální T 18 nabízí široký rozsah rychlostí od 3000 do 25000 min⁻¹ , umožňuje pracovat při vysokých obvodových rychlostech i při malých průměrech rotorů. Velký výběr dispergačních prvků zaručuje širokou škálu aplikací.

Supplier: IKA

Model stojanový, rozsah objemu 250 až 30000 ml. Reprodukovatelný provoz díky konstantní rychlosti, i při změnách viskozit.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 0,5 mm diameter yttria-stabilised zirconium oxide beads.

Supplier: MP Biomedicals

Lysing Matrix B is a critical component of FastPrep® sample preparation system. Each impact-resistant 2 ml tube contains 0,1 mm silica spheres. Lysing Matrix B tubes have blue caps and are found in the FastRNA™ Pro Blue Kit and FastProtein™ Blue Matrix. The fast and easy to use protocol ensures successful lysis with even the most challenging samples for high efficiency and reliability.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1,6 mm silicon carbide particles and 2 mm glass beads.

Supplier: MP Biomedicals

Lysing Matrix D is a critical component of FastPrep® sample preparation system. Each impact-resistant 2 ml tube contains 1,4 mm ceramic spheres. Lysing Matrix D tubes have green caps and are found in the FastDNA™ Spin Kit for Plant and Animal Tissues and FastRNA™ Pro Green Kit for isolation of nucleic acids from plants and animals.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1,4 mm ceramic spheres, 0,1 mm silica spheres, and one 4 mm glass bead. Lysing Matrix E tubes have purple caps and found in the FastDNA™ SPIN Kit for Soil and the FastRNA™ Pro Soil Kits. Lysing Matrix E can also be effective in lysing mixed samples, such as microbe infected tissue, and can be used in RNA extraction from tumours and other difficult tissues.

Supplier: IKA

Univerzální jednorázový dispergační systém s jednorázovými zkumavkami, které mohou být hermeticky utěsněny. Poskytuje bezpečnost a ochranu před infekčními vzorky, toxickými látkami nebo látkami se silnými pachy. Ideální pro použití v lékařských, patologických, toxikologických, farmaceutických, imunologických, veterinárních, klinických, potravinářských a kosmetických aplikacích. Jednotky jsou snadno a rychle použitelné, umožňují standardizovanou práci, jsou vhodné pro individuální použití nebo pro použití v sérii a jsou vybaveny funkcí proti zamykání.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and 1,6 mm aluminum oxide particles.

Supplier: MP Biomedicals

Lysing Matrix B tubes are used primarily for lysis of gram positive and gram negative bacteria, and will also disrupt fungal tissue and spores

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains one 6,35 mm diameter zirconium oxide coated ceramic grinding sphere.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimizing of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries.

Supplier: KINEMATICA

Disposable/reusable generators for when processing multiple samples per day, where the required sterilisation of stainless steel generators represents a significant time limitation.

Supplier: IKA

Typ N: Materiály v kontaktu s médiem jsou PTFE a nerezová ocel AISI 316L, vhodné pro rozpouštědla a abrazivní látky, lze sterilizovat všemi způsoby, max. teplota 180 °C.

Supplier: BRANSON

A series of sonifiers with advanced sample processing capabilities and a digital, intuitive menu driven interface.

Supplier: IKA

Homogeniser, Anchor stirrer for LABOR-PILOT

Supplier: IKA

Kapesní nebo stojanový model, rozsah objemu 0,5 až 100 ml. Široký rozsah otáček umožňuje pracovat při vysokých obvodových rychlostech i při malých průměrech rotorů.

Supplier: MP Biomedicals

FastPrep®-24 5G is a high speed bench top homogeniser offering the ultimate in speed and performance for the lysis of biological samples. It uses a unique, optimised motion to disrupt cells through the multi-directional, simultaneous beating of specialised Lysing Matrix beads on the sample material. Developed for difficult and resistant samples, the FastPrep®-24 5G instrument lyses thoroughly and quickly any tissues and cells and allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and a 4 mm black ceramic sphere.

Supplier: IKA

The high pressure homogeniser HPH is an inline dispersing machine for energy-efficient, continuous production of superfine emulsions. Compared to other IKA inline machines, the dispersing action of the high pressure homogeniser HPH is not based on the rotor/stator principle. The improved homogenising effect is achieved within the homogeniser by means of spontaneous decompression of the liquid from max. 2000 bar to an ambient pressure. With the same energy input, the IKA HPH produces considerably finer emulsions than conventional toothed ring dispersers. The use of high pressure homogenisers is recommended when a disintegration down to the nano range is required; however, these machines do achieve a smaller flow capacity than conventional dispersers. The high pressure homogeniser consists of a high pressure piston pump and a downstream homogenising valve. The pressure build-up within the HPH occurs by means of one or more piston pump(s) which, with the help of ceramic pistons, ensure(s) a volume flow that is independent of pressure and virtually pulsation free. The desired homogenising pressure can be infinitely adjusted. The pressure is reduced in a selected adjustable gap of the homogenizing valve. The quick pressure decrease in a moving medium leads to extremely high turbulences and cavitations, which then bring about the grinding of the raw product. The machine's design can be adapted to fit customer-specific tasks. The high pressure homogeniser is available in two sizes with either one or more piston(s) of varying Ø. These parameters determine the max. homogenising pressure (800 or 2000 bar) possible for a specific machine type, the minimal permitted feeding volume (up to 10 ml) as well as homogenising results and flow capacities.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimising of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries. It is an ideal machine for continuous, circulating and batch processing with interchangeable modules. Many work parameters of the magic LAB® are identical to those of the IKA 2000 inline production machines: UTL, DR, CMS, MHD, MK and MKO. Therefore, the magic LAB® ensures a reliable scale-up by offering the possibility to work with the same method from formulation development to mass production. The basic in-line machine is equipped with the single-stage dispersing module ULTRA-TURRAX® UTL. It is best suited for batch applications and can be adapted for the manufacturing of dispersions from coarse to fine. Compared to a conventional stirrer, the mixing time is reduced by up to 50%. Depending on the application, the basic unit can be modified quickly with different working modules.

Supplier: VWR Collection

Dispersing Element, Těsnicí kroužek k čepelím, autoklávovatelný, použití se základní deskou Steri-Blostev 12

Supplier: KINEMATICA

Standard generator rotor/stator with two teeth rows each.