Hledali jste: Těsnění
A variety of seals for the protection of lab samples from contamination are available at VWR. Secure microplate samples with films, foils, and sealing tapes; select products appropriate for ELISA, PCR, cold storage, and general incubation. Sealing mats minimize evaporation and eliminate cross-contamination. For beakers, flasks, petri dishes and other labware, choose sealing films that are heat or chemical resistant. Insure sample integrity with security seals that provide evidence of tampering. Mechanical seals are also offered.
Seal with Bore for Screw Caps, Silicone with PTFE Washer
Supplier: Lenz Laborglas GmbH & CO.KG
Silicone rubber sealing rings with PTFE washers.
Expand 14 Items
O-rings for laboratory flat flanges, BOLA
Supplier: Bohlender
FEP. Sealing for flat flange with groove.
Expand 5 Items
Closure for SuperFlex™ 96-well PCR plates
Supplier: Simport Scientific
Superflex™, Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, Průhledná, Non sterile
Expand 1 Items
Microplate sealing tape
Supplier: G-Biosciences
Acetate film with acrylic adhesive. This self-adhesive microplate sealing tape is suitable for sealing both 96-well and 384-well plates. The precut, pressure-senstive tape seals and reseals the surface of the plates during incubations to prevent evaporation and allow more vigorous mixing. The tape will reseal the plates 2 to 3 times.
Expand 1 Items
Sealing film, self-adhesive for PCR, real time PCR
Supplier: Brand
Polyester flims suitable for PCR and Real-Time PCR measurements. Temperature range: –40 °C to +120 °C.
Expand 1 Items
Gas permeable adhesive seal
Supplier: THERMO MATRIX TECHNOLOGIES
The gas permeable adhesive seal provides a simple and effective way of venting cultures whilst providing a barrier against contaminating bacteria. When used in conjunction with Thermo Scientific storage plates, bacterial growth can be increased by over 50%, compared to plates sealed with an aluminium foil seal or sealing mat.
Expand 1 Items
Fólie těsnící, samolepící, pro luminescenční měření
Supplier: Brand
Bílá fólie, která odráží světlo je vyrobená z vinylu a by měla být používána při luminescenčních měřeních. Teplotní rozpětí: −40 °C až +80 °C.
Expand 2 Items
Heat sealing foil, ClearASeal Pierce™
Supplier: iST Scientific Ltd
Clear pierceable film ideal for PP, PE, PS and COC plates. Suitable for use with the ABI 3730 sequencer as the thinner structure pierces more easily.
Expand 9 Items
Sealing mats for Bioblock™ deep well plates
Supplier: Simport Scientific
Designed to fit the Bioblock™ family, these mat covers are made of a specially formulated plastic ensuring great flexibility. They allow for maximum sample volume in each well. They are resistant to DMSO and biological buffers.
Expand 2 Items
Sealing mats for 96-well PCR plates, Amplate™
Supplier: Simport Scientific
Amplate™, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for 96-well PCR plates, Santoprene™, Modrá
Expand 1 Items
Heat sealing foil, PierceASeal Foil™
Supplier: iST Scientific Ltd
Pierceable foil seal with good solvent resistance. Suitable for PCR, compound storage, and sample shipping.
Expand 10 Items
Heat sealing foil, Gas PermASeal™
Supplier: iST Scientific Ltd
Non woven gas permeable and peelable seal for PP and PS plates. Suitable for short term incubation, agriculture and seed storage, insect storage, cell culture.
Expand 9 Items
Fólie krycí pro destičky s hlubokými jamkami
Supplier: Brand
Cover mats reduce the maximum volume of wells.
Expand 5 Items
Adhesive film seals for microplates, SecureSeal™
Supplier: Simport Scientific
Adhesive sealing films reduce sample-to-sample or well-to-well contamination and/or spill over. SecureSeal™ has the differential advantage of perforated end tabs and a multiple split backing which allow for easier and more accurate positioning and more secure sealing. The polyester based film with acrylic adhesive is inert and thus compatible with almost all microplate procedures. SecureSeal™ is less than 0,001% moisture permeable under high humidity conditions and less than 0,01% oxygen permeable.
Expand 2 Items
Těsnící fólie, samolepící, pro skladování v chladu
Supplier: Brand
Hliníkovou těsnící fólii lze snadno propíchnout pipetovací špičkou k odtranění vzorku. Teplotní rozpětí: −80 až +120 °C.
Expand 1 Items
Fólie těsnící, samolepící pro fluorescenční měření
Supplier: Brand
Černá těsnící fólie vyrobená z vinylu, je velice vhodná pro fluorescenční měření díky svých světlo-absorbujícím vlastnostem. Teplotní rozpětí: −40 až +80 °C.
Expand 1 Items
Těsnící fólie, samotěsnící pro automatizaci
Supplier: Brand
Chemicky odolná PE/PP fólie obsahuje nelepící plochy nad jamkami,které brání kontaminaci. Mimoto fólii lze snadno propíchnout pipetovacími špičkami (k odstranění vzorků). Teplotní rozpětí: −40 do +90 °C.
Expand 1 Items
Těsnící fólie, samolepící pro buněčné a tkáňové kultury
Supplier: Brand
Vzdušné fólie (sterilní/nesterilní) jsou oblíbené pro růst buněk a mikroorganismů. Teplotní rozpětí: −20 do +80 °C.
Expand 2 Items
Pierce™ Sealing Tape for 96-Well Microplates
Supplier: Thermo Fisher Scientific
Microplate sealing tape consisting of pre-cut, pressure-sensitive sheets for sealing the surface of standard 96-well or 384-well microplates during incubation steps.
Expand 1 Items
Heat sealing foil, ClearASeal Weld™
Supplier: iST Scientific Ltd
Clear strong bonding film ideal for water thermal cyclers. Suitable for qPCR, PCR (water bath thermal cycling), storage, sample inspection, disposal of hazardous materials, use with DMSO.
Expand 9 Items
Heat sealing foil, PeelASeal Foil™
Supplier: iST Scientific Ltd
Peelable foil laminate for polyproylene plates. Suitable for PCR, low temperature, short term compound storage, short term room temperature compound storage (less than 5 days).
Expand 9 Items
Heat sealing foil, ClearASeal Peel™
Supplier: iST Scientific Ltd
Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. The ClearASeal Peel is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates
Expand 9 Items
Plate sealing film, AeraSeal
Supplier: OMEGA BIO-TEK
AeraSeal is a 114 µm thick, hydrophobic porous film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth.
Expand 1 Items
Cap strips for skirted low profile plates
Supplier: Brand
Microplate seal, Cap strip, Single sheet/mat/strip, Cap strips, 8-strip, flat top, 8 víček na stripy PCR, čirá, pro qPCR, plochá, pro destičky PCR "low profile" s lemem
Expand 2 Items
Caps for microtubes
Supplier: RATIOLAB
Microplate seal, Cap strip, Single sheet/mat/strip, Closure, 8-Cap Strips, TPE, TPE, Non sterile
Expand 2 Items
Fólie těsnící, samolepící pro ELISU, PCR
Supplier: Brand
Průsvitná PP fólie umožňuje vizuální kontrolu vzorků. Teplotní rozpětí: −40 až +125 °C.
Expand 1 Items
Amplitube™ Cap Strips for Well Plates
Supplier: Simport Scientific
Amplitube™ domed cap strips ensure a perfect closure and a positive seal during thermal cycling and prevent evaporation.
Expand 1 Items
Heat sealing foil, PeelASeal DMSO Foil™
Supplier: iST Scientific Ltd
Peelable DMSO resistant foil for polypropylene plates. Suitable for low temperature and ambient temperature storage with DMSO and other solvents.
Expand 9 Items
Adhesive sealing film for microplates, QuickSeal Micro™
Supplier: iST Scientific Ltd
Transparent peelable film for storage. Suitable for aqueous sample storage.
Expand 5 Items
Adhesive PCR foil seals, QuickSeal Foil PCR ULTRA™
Supplier: iST Scientific Ltd
Pierceable, peelable barrier foil for PCR and sample storage.