Hledali jste: Filtry

Supplier: MILLIPORE

The Stericap™ PLUS Universal bottle-top filter device with Millipore Express® PLUS membrane provides fast vacuum filtration and low protein binding without the need for a prefilter in most cases. It filters quickly, without clogging, even viscous solutions typical of serum-containing media. This non-cytotoxic, non-pyrogenic device can be used to fill any vacuum-rated bottle or other container with an inner neck diameter of 20 to 67 mm. This allows maximum versatility, capacity, speed, and flowthrough efficiency when you need to filter larger volumes into containers with openings of various sizes.

Supplier: MILLIPORE

Millipore's 37 mm Aerosol analysis monitors are transparent, disposable, plastic filter holders pre-assembled with Type MF (mixed cellulose esters) Millipore filters. A thin cellulose support seals the filter between monitor sections to distribute sample flow evenly over the filter surface. The three-part design holds the filter in-place when the top section is removed for open aerosol sampling.

Supplier: Merck

The EZ-FIT^® filtration unit is a single-use filtration device made of white, gridded, and mixed cellulose esters (MCE) membrane with a blue base integrating a cellulose support pad. It provides a safe and fast way of performing membrane filtration by avoiding the exposure to the risks of microbiological analysis.

Supplier: Merck

The EZ-FIT^® filtration unit is a single-use filtration device made of white, gridded, and mixed cellulose esters (MCE) membrane with a blue base integrating a cellulose support pad. It provides a safe and fast way of performing membrane filtration by avoiding the exposure to the risks of microbiological analysis.

Supplier: MILLIPORE

The Stericup® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop® filter unit with a receiver flask for processing and storing volumes from 150 to 1000 ml in a single, ready-to-use format. Its no-tip, easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device.

Supplier: Merck

Designed for extracting large volumes of aqueous samples. Suitable for EPA methods and environmental methods.

Supplier: MILLIPORE

The Steriflip® filter unit performs vacuum assisted, closed system ensures sample sterility while enabling fast separation of large volumes of cellular material for efficient recoveries. It also eliminates messy pouring during sample transfer. Filters come in different pore sizes that are ideal for cell isolation.

Supplier: MILLIPORE

Samplicity® G2 Filtration system enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.

Supplier: MILLIPORE

The EZ-Fit™ Filtration unit is a disposable filtration device for bioburden testing of liquid samples including water, in-process samples, and final products.

Supplier: witeg Labortechnik

The borosilicate glass vacuum filtration system with glass frit is complete with perforated PP screw thread cap GL 14, collecting flask 1000 ml, glass lower part with plastic hose connector, and seal elements PTFE.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Filter cartridge, Fine filter plug, 508 mm×5 µm

Supplier: MACHEREY-NAGEL

Filter papers with ion exchange resin.

Supplier: MILLIPORE

Fluid Contamination Analysis Monitors are transparent, disposable filter holders made from Tenite® plastic and pre-assembled with MF-Millipore filters (effective filtration area is 9 cm²).

Supplier: MILLIPORE

The Steriflip® filter unit performs vacuum assisted, closed system ensures sample sterility while enabling fast separation of large volumes of cellular material for efficient recoveries. It also eliminates messy pouring during sample transfer. Filters come in different pore sizes that are ideal for cell isolation.

Supplier: Merck

Solid phase extraction disks provides faster flow rates and exhibits less clogging than PTFE discs for the extraction of organic contaminants from drinking water samples.

Supplier: VARIAN

PP frit, are made with high-grade, clean PE for clean extracts.

Supplier: MILLIPORE

The PS monitor is used for sample collection and particle analysis. The PP monitor is used for microscopic particle analysis and sample collection for HPLC and UV detection.

Supplier: MILLIPORE

Ideal for sterilising tissue culture media, buffers, or other aqueous solutions. The no tip, tapered receiver flask and compact profile of the Stericup® design improve stability and make gripping the receiver easier.

Supplier: MILLIPORE

Millicup™ membrane filter units are non sterile universal bottle top vacuum filters, used for sterile filtration.

Supplier: MILLIPORE

Empty Monitor Cassettes

Supplier: MACHEREY-NAGEL

Paper chromatography is the chromatographic technique separation due to partition of the analytes between special paper grades and the mobile phase, which penetrates the paper by capillary action ascending, descending and circular techniques are possible.

Supplier: VICI JOUR RESEARCH

This safety air outlet filter regulates the pressure during helium sparging.

Supplier: MACHEREY-NAGEL

Smooth folded filter papers for fat analysis.

Supplier: MACHEREY-NAGEL

Wet-strengthened analytical filter papers are made of refined pulp and linters and feature a content of α-cellulose of more than 95%. The smooth surface of these papers allows fibre-free filtration.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: MACHEREY-NAGEL

Phosphate-free smooth filter papers for soil analysis.

Supplier: MACHEREY-NAGEL

This filter paper retains very fine turbidities and is e.g. recommended for the clarification of urines or sugar solutions.

Supplier: MACHEREY-NAGEL

This filter paper, which is dyed black with a sulphur dye, is used to identify small quantities of light precipitates. For example, it is used for the detection of fluorine or silicon.

Supplier: MACHEREY-NAGEL

Grade MN 651, creped.

Supplier: MILLIPORE

The Sterivex™ filter unit has a compact design ideal for large volume filtration using positive pressure.