Hledali jste: Filtry

Supplier: Ahlstrom-Munksjö

Boards which by their filtration properties are keyed to specific applications as well as to industrial filtration processes.

Supplier: Merck

Multiple bed trap removes hydrocarbons, moisture, oxygen, carbon monoxide, and carbon dioxide from helium gas streams.

Supplier: Merck

This economy water vapor trap is designed for moisture removal for compressed air service to pneumatically-controlled devices.

Supplier: Sartorius

These filters are designed for biopharmaceutical industry from particle removal to bioburden reduction. They offer a defined retention performance by size exclusion.

Supplier: Sartorius

Sartofluor® two filter systems are ideally suited for bioburden reduction and particle removal of highly viscous and difficult to filter pharmaceutical solutions. Due to its hydrophilic PES membrane, the filter offers outstanding total throughputs and flow rate performances. Thus ensuring highest process efficiency, minimised filtration costs and short filtration cycle times.

Supplier: Sartorius

Hydrosart® membranes are stabilised cellulose based membranes that have been optimised for the biotechnological and pharmaceutical industry. It is a stable polymer that features a broad pH range. Hydrosart® is also extremely hydrophilic, making it non-protein binding, virtually non-foul and has extremely high flux. Membrane regeneration, storage and depyrogenation can be accomplished by using NaOH even at elevated temperatures. These features make Hydrosart® an ideal membrane for biological applications.

Supplier: Sartorius

Sartovent® is an ideal filter for sterile aeration of tanks. It is entirely made of PP and does not alter the organoleptic properties of the product.

Supplier: Sartorius

Sartofluor® GA filter cartridges, manufactured with permanently hydrophobic PTFE membranes, are specially designed for sterile venting and gas applications. Due to their permanent hydrophobicity, they offer the highest process security, even with high volume gas streams, extreme humidity and stringent in-line steam sterilisations.

Supplier: Cytiva

Filter kits for Tricorn 5 and 10 columns are available in three porosities.

Supplier: DWK Life Sciences

These micro filter candles are made from clear DURAN® borosilicate glass 3.3.

Supplier: DWK Life Sciences

Micro immersion filter for reverse filtration, such as extraction, of clear filtrate (not the filtrand).

Supplier: Bohlender

Filter disc made of porous PTFE.

Supplier: ZEISS

Filter set 96 HE with reflector module FL EC P and C (E), consisting of the filters EX BP 390/40, BS FT 420, EM BP 450/40 installed in reflector module with reflection prevention through inclined mount for emission filter

Supplier: Sartorius

Sartoclean® filter cartridges are cellulose acetate (CA) membrane based prefilters. These filters are optimised for the protection of downstream equipment and Sartobran® CA final filters.

Supplier: VARIAN

Oxygen gas purifier made up of spun aluminum chamber.

Supplier: Sartorius

Filter cartridge, Sartobran®, PP, Materiál membrány: CA, Type: 25 (S-adapter top, locking bayonet adapter with 226 double O-ring bottom), Velikost pórů: 0,2 µm, Filtrační plocha: 6000 cm²

Supplier: DWK Life Sciences

These micro filter candles are made from clear DURAN® borosilicate glass 3.3.

Supplier: Sartorius

Sartoguard® GF filter elements consist of glass fiber layers and PES membranes. They combine the defined retention performance for particles and microorganisms of membrane filters with the high total throughput capacity in the depth of the fibrous material. They are ideally suited for effective retention of particles, colloids and lipids which block more expensive sterilising grade or Mycoplasma retentive membrane filters quickly.

Supplier: Sartorius

Sartolon® filter cartridges are designed for broad chemical compatibility for specific applications in the pharmaceutical and chemical industry. The double-layer design leads to superior filtration performance compared to other nylon membrane filters. Ideal for filtration of a broad range of solvents and solvent-containing liquids.

Supplier: MILLIPORE

Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our glass fibre filters are available with or without binder resins and can be sterilised by EO, gamma, or autoclave (121 °C at 1 bar).

Supplier: Agilent

It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.

Supplier: VARIAN

This mobile phase inlet filter operates up to 500 °C and is compatible with halogenated solvents.

Supplier: PIEPER FILTER

Filter fleece is suitable for drainage under membranes. It is also used in chipping processes to keep the coolant free of the chips. The fleece is also suitable for coarse air filtration.

Supplier: DWK Life Sciences

This microfiltration system manufactured from 33 expansion, low extractable borosilicate glass eliminates pouring HPLC solvents into funnels. The solvent pickup adapter draws solvent directly from a reagent bottle through a 47 mm filter and into a filter flask.

Supplier: DWK Life Sciences

These vacuum microfiltration assemblies are manufactured from 33 expansion, low extractable borosilicate glass. The 47 mm vacuum microfiltration assembly is used for general filtration and is designed to handle up to 500 ml of sample liquids for the analysis of particulate or microbiological contamination. The 90 mm vacuum microfiltration assembly is designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. The assembly with fritted glass support is used for general filtration.

Supplier: -

Polyamide mesh (Nylon): Resistance to acids is limited and dependent on the concentration and temperature. Excellent resistance to alkalis, including caustic soda and caustic potash. Chemical performance against organic solvents is very good. Temperature resistant from 0 to 130 °C when dry, 95 to 100 °C in water.

Supplier: DWK Life Sciences

The 25 mm vacuum microfiltration assembly is designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. It has a stainless steel support and is used for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate.

Supplier: Whatman products (Cytiva)

The microbiological filtration system is used for optimal microbiological control using membranes. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to more reproducible results.

Supplier: Merck

The EZ-FIT^® filtration unit is a single-use filtration device made of white, gridded, and mixed cellulose esters (MCE) membrane with a blue base integrating a cellulose support pad. It provides a safe and fast way of performing membrane filtration by avoiding the exposure to the risks of microbiological analysis.

Supplier: MILLIPORE

The Stericup® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop® filter unit with a receiver flask for processing and storing volumes from 150 to 1000 ml in a single, ready-to-use format. Its no-tip, easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device.