Hledali jste: Filtry

Supplier: JSP

PressToCheck™ twin filters for the Force®8 half mask and Force®10 full face mask facilitate instant and accurate checking of the face fit before entering the hazard area, without affecting the seal of the mask to the face.

Supplier: Cytiva (Formerly Pall Lab)

Specifically designed for sterilizing cell culture media.

Supplier: Cytiva (Formerly Pall Lab)

Univerzální membrána filtrů stříkaček Acrodisc® One PSF je vhodná pro všechny typy vzorků s rychlým průtokem, nízkou vazností proteinů a nízkou úrovní extraktů pohlcujících UV záření.

Supplier: Cytiva (Formerly Pall Lab)

ValuPrep syringe filters offer the confidence of Pall membranes in economic 1000 packs.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are particularly useful for liquid clarification and liquid scintillation counting.

Supplier: MOTIC

Panthera, Didymiový filtr (Ø = 45 mm)

Supplier: Sartorius

These filters are mostly used either for monitoring air and gas or as prefilter. They are manufactured with synthetic binding agents to ensure that the filter has a defined strength.

Supplier: Cytiva (Formerly Pall Lab)

Multipurpose filter for small volume venting and gas filtration, ideal for small bioreactors and fermenters.

Supplier: Cytiva (Formerly Pall Lab)

These XT Acrodisc® units with Mustang® Q membrane are designed for laboratory use and scale-down process development.

Supplier: Whatman products (Cytiva)

Tyto papíry jsou navrženy pro použití při sušení vzorků během testu vlhkosti. Borosilikátové sklo.

Supplier: Sartorius

Minisart® NY with hydrophilic polyamide (nylon) is optimised for aqueous liquids and solvents with a pH of 3 to 14. Type 17845 with a pore size of 0,2 µm can be used for sample preparation and sterile filtration. It has a male Luer slip outlet and version ACK is individually packed and sterilised by ethylene oxide (EO).

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are widely used as total suspended solids filters for applications testing both potable water and waste water.

Supplier: ENTEGRIS

High performance, disposable filters for low flow applications. These filters provide compatibility with a wide range of acids, bases and non flammable solvents at ambient temperatures.

Supplier: S.C.A.T.

The SCAT V3.0 exhaust filter for safety waste caps guarantees over 90% CTC adsorption for maximum air purity due to three integrated activated carbon types.

Supplier: Cytiva (Formerly Pall Lab)

These centrifugal devices are suitable for rapid sample prepration in many applications.

Supplier: Whatman products (Cytiva)

Tyto kapslové filtry Polycap ™ GW (podzemní voda) jsou speciálně navrženy pro přípravu vzorků vzorků podzemní vody pro analýzu rozpuštěných kovů. In-line konstrukce se stupňovitými hadicovými háčky a hydrofilní polyethersulfonovou (PES) membránou usnadňuje použití při vzorkování v terénu.

Supplier: Ahlstrom-Munksjö

Ahlstrom-Munksjö nabízí vysoce kvalitní skleněné filtry ideální pro mnoho aplikací, jako je kontrola znečištění ovzduší, analýza znečištění vody a sledování vzduchových částic. Filtry ze skleněných mikrovláken bez obsahu pojiv jsou vhodné pro záchyt částic a aerosolů nebo k určení celkového obsahu pevných částic.

Supplier: Whatman products (Cytiva)

Whatman Grade GF 9 glass microfiber filters from Cytiva's business are strengthened with an inorganic binder for environmental analysis of coarse, heavy samples.

Supplier: Cytiva (Formerly Pall Lab)

Odstranění endotoxínů z vody, pufrů, přírodních cukrů a některých biologických roztoků. Také pro přípravu plasmidů pro transfekci.

Supplier: Whatman products (Cytiva)

These microfiber filters made from borosilicate glass are suitable for water and wastewater analysis, with extremely fine particle retention and added strength.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are fine membrane filters that can also function as a prefilter when used with GF/B.

Supplier: VWR Collection

Filter vials with the membrane, PE snap ring cap (11 mm), with hole and silicone white/PTFE red septa.

Supplier: Cytiva (Formerly Pall Lab)

Silné, chemicky odolné membrány pro monitoring vzduchu a vzorkování v agresivních prostředích.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Sartorius

These 100% high-purity quartz microfibre filters are free of glass fibres and binding agents. They are especially suited for emission monitoring at temperature of up to 900 °C and wherever filters of the highest purity are needed.

Supplier: Whatman products (Cytiva)

Grade GF/A card-mounted filters are used in static sample and personal air sampler applications. These aerosol sampling and particulate monitoring filters provide high flow rates and minimal sample interference.

Supplier: Cytiva (Formerly Pall Lab)

The Acrodisc® WBC premium syringe filter is ideal for use in the capture and recovery of leukocytes and the separation of red blood cells. Acrodisc® WBC provides a simple and efficient method to isolate blood cells used in a variety of research applications including: Antigen specificity and modulation studies, immune receptor analysis, receptor protein studies, genotyping, gene expression, cell therapy.

Supplier: Socorex Isba

In-line filter, Bal.: 50

Supplier: Cytiva (Formerly Pall Lab)

The next generation universal membrane of the Acrodisc® One syringe filters is suitable for all sample types with fast flow rates, low protein binding, and low levels of UV-absorbing extractables.

Supplier: Whatman products (Cytiva)

HGF61 glass fibre tape provides strength, efficiency, reliability and consistency of data quality in continuous air monitoring.